This commit removes the unused error code
```
MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH
```
from the public API for Mbed TLS 3.0.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This error is used when the output buffer isn't large enough
to hold our own certificate.
In the interest of cleaning up the error space for 3.0, this commit
removes MBEDTLS_ERR_SSL_CERTIFICATE_TOO_LARGE and replaces its single
use by MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The SSL error code MBEDTLS_ERR_SSL_PEER_VERIFY_FAILED is unused.
Remove it for Mbed TLS 3.0.
The code being unused comes as a surprise, at is seems to be
reasonable to report it to the user upon peer CRT verification
failure. However, this study (can potentially re-introduction
of the code) can be left for 3.x, while the error code removal
can only happen in 3.0.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The SSL error code MBEDTLS_ERR_SSL_UNKNOWN_CIPHER is unused.
Remove it for Mbed TLS 3.0 and leave a comment indicating the
gap in the error code space it creates.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Fix an issue where `MBEDTLS_X509_REMOVE_INFO` was defined/enabled by default
in `include/mbedtls/config.h`. This should also fix the `context-info.sh` test
where it ran the default config and expected to see some output from the x509
info functions that were removed.
Also updated relevant comments to more accurately explain how the
configuration option works.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
The new compile-time option MBEDTLS_X509_REMOVE_INFO removes various
X.509 debugging strings and functionality, including
```
mbedtls_x509_crt_verify_info()
```
which ssl_client2.c and ssl_server2.c use to print human readable
descriptions of X.509 verification failure conditions. Those
conditions are also grepped for in numerous ssl-opt.sh tests.
Instead of disabling those tests if MBEDTLS_X509_REMOVE_INFO is set,
this commit essentially moves mbedtls_x509_crt_verify_info() to
ssl_client2.c and ssl_server2.c. However, instead of just copy-pasting
the code from x509_crt.c, the following approach is used:
A macro MBEDTLS_X509_CRT_ERROR_INFO_LIST is introduced which for each
verification failure condition invokes a user-defined macro X509_CRT_ERROR_INFO
with (a) the numerical error code, (b) the string presentation of the
corresponding error macro, (c) the info string for the error condition.
This macro can thus be used to generate code which somehow iterates over
the verifiation failure conditions, but the list of error conditions and
information strings is nowhere duplicated.
This is then used to re-implement mbedtls_x509_crt_verify_info() in
x509_crt.c and to provide a functionally equivalent (yet slightly different)
version in ssl_client2.c and ssl_server2.c in case MBEDTLS_X509_REMOVE_INFO
is set.
This way, little changes to ssl-opt.sh will be necessary in case
MBEDTLS_X509_REMOVE_INFO is set because the info strings for the
verification failure conditions will be printed regardless of whether
MBEDTLS_X509_REMOVE_INFO is set or not.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The introduction of positive options to control the presence
of pre-existing functionality breaks the build for users of
handwritten configurations.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Introduce MBEDTLS_X509_INFO to indicate the availability of the
mbedtls_x509_*_info() function and closely related APIs. When this is
not defined, also omit name and description from
mbedtls_oid_descriptor_t, and omit OID arrays, macros, and types that
are entirely unused. This saves several KB of code space.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
This function was previously called mbedtls_error_add_ext because there
was a macro called mbedtls_error_add. That later got capitalised which
allows the function to now be named mbedtls_error_add.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Improve comments explaining error code checking, fix incorrect comments
and make a small formatting fix.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
If the compile-time configuration enables an option that was removed
in Mbed TLS 3.0, and the effect of removing the option would likely
not be detected at build time, #error out in check_config.h.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
According to the design in psa-driver-interface.md. Compiles without
issue in test_psa_crypto_drivers.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This reverts commit c75d9f589bf392177dbeba7704693e53fe55cb19.
This was merged by mistake in development instead of development_3.0.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
MSVC is not fully compliant with C99 where the 'inline' keyword is defined.
Add a macro to define an alternative for non-compliant compilers.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add a missing guard for the definition and declaration of
mbedtls_test_hook_error_add.
Also make the declaration always visible when MBEDTLS_TEST_HOOKS is
enabled. This fixes an issue when MBEDTLS_ERROR_C is not defined but
MBEDTLS_TEST_HOOKS is.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Improve documentation by:
- Fixing off by one errors in binary representations of error codes.
- Clarifying combinations of zero.
- Linking references to variables/macros via doxygen.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Fix unused parameter warnings when MBEDTLS_TEST_HOOKS is not enabled.
A few issues were caught by check-names.sh namely:
- mbedtls_error_add was not capitalised.
- mbedtls_test_hook_error_add was being defined multiple times as the
definition was in a header.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
The previous implementation of the error addition interface did not comply
with the invasive testing architecture guidelines. This commit fixes that
by:
- Renaming functions/macros/variables to follow the mbedtls_error_xxx or
mbedtls_test_hook_xxx convention.
- Making mbedtls_test_hook_error_add a global variable that can be set
by the testing code.
- Using a static inline function call, as opposed to macro, to keep
discrepancies between debug and production version to a minimum.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Fix builds where `MBEDTLS_ERROR_C` is not defined but `MBEDTLS_TEST_HOOKS`
is defined. This was previously causing undefined reference errors in
these builds.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Change the signature of the `hook` parameter of `mbedtls_set_err_add_hook`
to use the actual signature of the function as opposed to `void *`. This
fixes a warning when compiling with clang `-pedantic`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`error.c` and error.h are the more logical place to keep this code and it
prevents issues with building `common.c` and conflicts with other projects
that use mbedtls (such as mbedOS).
`error.c` has been automatically generated by first adding the code to
`error.fmt` and then running `./scripts/generate_errors.pl`.
Also add parenthesis to the addition in `MBEDTLS_ERR_ADD`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`error.c` is a file generated from `error.h` and thus cannot contain the code
that was previously added. This commit fixes that issue by moving the
`MBEDTLS_ERR_ADD` macro and associated function and function pointer into
`common.h` and `common.c`.
Also fix a typo in `tests/include/test/helpers.h` where tabs were accidentally
used instead of spaces.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Adds a macro (`MBEDTLS_ERR_ADD`) to add error codes together and check that the
result will not be corrupted. This additional check is only enabled during
testing when `MBEDTLS_TEST_HOOKS` is defined.
Also includes a reference usage example in `rsa.c` where two high-level error
codes could be incorrectly added together under the right conditions. This now
ensures that when this error occurs during testing it will be correctly
reported.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
