mirror of
https://github.com/FreeRTOS/coreMQTT
synced 2025-05-14 22:30:21 +08:00
b581fc4172
### Problem The `MQTT_ProcessLoop` and `MQTT_ReceiveLoop` read incoming MQTT packet payload over the network by calling the `recvExact` function. The `recvExact` function can be called multiple times to read the expected number of bytes for the MQTT packet but it also implements a timeout functionality of receiving the expected number of payload within the timeout value passed to the function. This causes problems when the `Transport_Recv` call returns less than requested number of bytes, and there is a timeout (for example, when calling `MQTT_ProcessLoop` with 0ms duration) which causes the function to assume failure instead of reading the remaining payload of the MQTT packet by calling `Transport_Recv` again. Thus, in such cases, the MQTT connection is severed prematurely even though there is a high probability of receiving the remaining bytes of the MQTT packet over the network. ### Solution Instead of implementing a timeout on the entire duration of receiving the expected number of remaining MQTT packet bytes in `recvExact`, the use of timeout is being changed to be relevant only on the total time of receiving 0 bytes over the network over multiple calls to `Transport_Recv`. As this modified meaning of the timeout duration is now unrelated to the timeout duration that the `MQTT_ProcessLoop` or `MQTT_ReceiveLoop` functions are called, a new configuration constant for the `recvExact` timeout value, `MQTT_RECV_POLLING_TIMEOUT_MS`, has been added to the library which will carry a default value of 10ms. Co-authored-by: Sarena Meas <sarem@amazon.com>