HEYAHONG/ExtBoard-001
1
0
Fork 0
mirror of https://github.com/HEYAHONG/ExtBoard-001.git synced 2025-05-08 23:52:38 +08:00
Code Issues Packages Projects Releases Wiki Activity

初步移植原厂USB虚拟串口(无需外部上拉电阻，暂未连接外设)

Browse Source
This commit is contained in:
HEYAHONG 2024-04-09 19:38:36 +08:00
parent 32bca09229
commit acf50ff83e
No known key found for this signature in database
GPG Key ID: BD5679034F83A8A9
36 changed files with 7313 additions and 4065 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

0
FW/Core/001-base_rt/.gitignore → FW/Core/.gitignore vendored
View File

66
FW/Core/001-base_rt/.config
View File

@ -67,7 +67,7 @@ CONFIG_RT_USING_SMALL_MEM_AS_HEAP=y
# CONFIG_RT_USING_USERHEAP is not set
# CONFIG_RT_USING_NOHEAP is not set
# CONFIG_RT_USING_MEMTRACE is not set
# CONFIG_RT_USING_HEAP_ISR is not set
CONFIG_RT_USING_HEAP_ISR=y
CONFIG_RT_USING_HEAP=y
CONFIG_RT_USING_DEVICE=y
# CONFIG_RT_USING_DEVICE_OPS is not set
@ -309,6 +309,21 @@ CONFIG_RT_USING_CPP_WRAPPER=y
#
# CONFIG_PKG_USING_WLAN_WICED is not set
# CONFIG_PKG_USING_RW007 is not set
#
# CYW43012 WiFi
#
# CONFIG_PKG_USING_WLAN_CYW43012 is not set
#
# BL808 WiFi
#
# CONFIG_PKG_USING_WLAN_BL808 is not set
#
# CYW43439 WiFi
#
# CONFIG_PKG_USING_WLAN_CYW43439 is not set
# CONFIG_PKG_USING_COAP is not set
# CONFIG_PKG_USING_NOPOLL is not set
# CONFIG_PKG_USING_NETUTILS is not set
@ -330,7 +345,6 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_JIOT-C-SDK is not set
# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
# CONFIG_PKG_USING_JOYLINK is not set
# CONFIG_PKG_USING_EZ_IOT_OS is not set
# CONFIG_PKG_USING_IOTSHARP_SDK is not set
# CONFIG_PKG_USING_NIMBLE is not set
# CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set
@ -351,6 +365,8 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_NMEALIB is not set
# CONFIG_PKG_USING_PDULIB is not set
# CONFIG_PKG_USING_BTSTACK is not set
# CONFIG_PKG_USING_BT_CYW43012 is not set
# CONFIG_PKG_USING_CYW43XX is not set
# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
# CONFIG_PKG_USING_WAYZ_IOTKIT is not set
# CONFIG_PKG_USING_MAVLINK is not set
@ -370,6 +386,8 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_ZFTP is not set
# CONFIG_PKG_USING_WOL is not set
# CONFIG_PKG_USING_ZEPHYR_POLLING is not set
# CONFIG_PKG_USING_MATTER_ADAPTATION_LAYER is not set
# CONFIG_PKG_USING_LHC_MODBUS is not set
#
# security packages
@ -416,7 +434,6 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# LVGL: powerful and easy-to-use embedded GUI library
#
# CONFIG_PKG_USING_LVGL is not set
# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
# CONFIG_PKG_USING_LV_MUSIC_DEMO is not set
# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set
@ -492,6 +509,7 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_ARMV7M_DWT_TOOL is not set
# CONFIG_PKG_USING_VOFA_PLUS is not set
# CONFIG_PKG_USING_RT_TRACE is not set
# CONFIG_PKG_USING_ZDEBUG is not set
#
# system packages
@ -528,10 +546,14 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_UC_COMMON is not set
# CONFIG_PKG_USING_UC_MODBUS is not set
# CONFIG_PKG_USING_FREERTOS_WRAPPER is not set
# CONFIG_PKG_USING_LITEOS_SDK is not set
# CONFIG_PKG_USING_TZ_DATABASE is not set
# CONFIG_PKG_USING_CAIRO is not set
# CONFIG_PKG_USING_PIXMAN is not set
# CONFIG_PKG_USING_PARTITION is not set
# CONFIG_PKG_USING_PERF_COUNTER is not set
# CONFIG_PKG_USING_FILEX is not set
# CONFIG_PKG_USING_LEVELX is not set
# CONFIG_PKG_USING_FLASHDB is not set
# CONFIG_PKG_USING_SQLITE is not set
# CONFIG_PKG_USING_RTI is not set
@ -551,6 +573,7 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_QBOOT is not set
# CONFIG_PKG_USING_PPOOL is not set
# CONFIG_PKG_USING_OPENAMP is not set
# CONFIG_PKG_USING_RPMSG_LITE is not set
# CONFIG_PKG_USING_LPM is not set
# CONFIG_PKG_USING_TLSF is not set
# CONFIG_PKG_USING_EVENT_RECORDER is not set
@ -564,6 +587,11 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_AGILE_UPGRADE is not set
# CONFIG_PKG_USING_FLASH_BLOB is not set
# CONFIG_PKG_USING_MLIBC is not set
# CONFIG_PKG_USING_TASK_MSG_BUS is not set
# CONFIG_PKG_USING_SFDB is not set
# CONFIG_PKG_USING_RTP is not set
# CONFIG_PKG_USING_REB is not set
# CONFIG_PKG_USING_R_RHEALSTONE is not set
#
# peripheral libraries and drivers
@ -628,6 +656,7 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_BALANCE is not set
# CONFIG_PKG_USING_SHT2X is not set
# CONFIG_PKG_USING_SHT3X is not set
# CONFIG_PKG_USING_SHT4X is not set
# CONFIG_PKG_USING_AD7746 is not set
# CONFIG_PKG_USING_ADT74XX is not set
# CONFIG_PKG_USING_MAX17048 is not set
@ -729,6 +758,11 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_FINGERPRINT is not set
# CONFIG_PKG_USING_BT_ECB02C is not set
# CONFIG_PKG_USING_UAT is not set
# CONFIG_PKG_USING_ST7789 is not set
# CONFIG_PKG_USING_VS1003 is not set
# CONFIG_PKG_USING_X9555 is not set
# CONFIG_PKG_USING_SYSTEM_RUN_LED is not set
# CONFIG_PKG_USING_BT_MX01 is not set
# CONFIG_PKG_USING_SPI_TOOLS is not set
#
@ -743,6 +777,7 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_ULAPACK is not set
# CONFIG_PKG_USING_QUEST is not set
# CONFIG_PKG_USING_NAXOS is not set
# CONFIG_PKG_USING_R_TINYMAIX is not set
#
# Signal Processing and Control Algorithm Packages
@ -752,6 +787,7 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_UKAL is not set
# CONFIG_PKG_USING_DIGITALCTRL is not set
# CONFIG_PKG_USING_KISSFFT is not set
# CONFIG_PKG_USING_CMSIS_DSP is not set
#
# miscellaneous packages
@ -783,12 +819,14 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_DONUT is not set
# CONFIG_PKG_USING_COWSAY is not set
# CONFIG_PKG_USING_MORSE is not set
# CONFIG_PKG_USING_TINYSQUARE is not set
# CONFIG_PKG_USING_LIBCSV is not set
# CONFIG_PKG_USING_OPTPARSE is not set
# CONFIG_PKG_USING_FASTLZ is not set
# CONFIG_PKG_USING_MINILZO is not set
# CONFIG_PKG_USING_QUICKLZ is not set
# CONFIG_PKG_USING_LZMA is not set
# CONFIG_PKG_USING_RALARAM is not set
# CONFIG_PKG_USING_MULTIBUTTON is not set
# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
# CONFIG_PKG_USING_CANFESTIVAL is not set
@ -825,7 +863,9 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# Projects and Demos
#
# CONFIG_PKG_USING_ARDUINO_MSGQ_C_CPP_DEMO is not set
# CONFIG_PKG_USING_ARDUINO_SKETCH_LOADER_DEMO is not set
# CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set
# CONFIG_PKG_USING_ARDUINO_NINEINONE_SENSOR_SHIELD is not set
# CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set
# CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set
@ -833,13 +873,13 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# Sensors
#
# CONFIG_PKG_USING_ARDUINO_SENSOR_DEVICE_DRIVERS is not set
# CONFIG_PKG_USING_ARDUINO_CAPACITIVESENSOR is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSOR is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSORLAB is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL375 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL53L0X is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL53L1X is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSOR is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL6180X is not set
# CONFIG_PKG_USING_ADAFRUIT_MAX31855 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31855 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31865 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31856 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX6675 is not set
@ -884,7 +924,7 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS3MDL is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90640 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MMA8451 is not set
# CONFIG_PKG_USING_ADAFRUIT_MSA301 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MSA301 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPL115A2 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X_RVC is not set
@ -923,7 +963,6 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU21DF is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AS7341 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU31D is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSORLAB is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_INA260 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP007_LIBRARY is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_L3GD20 is not set
@ -946,7 +985,7 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_ARDUINO_SEEED_TSL2561 is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_PAJ7620 is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_VL53L0X is not set
# CONFIG_PKG_USING_SEEED_ITG3200 is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_ITG3200 is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_SHT31 is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_HP20X is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_DRV2605L is not set
@ -954,7 +993,7 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_ARDUINO_SEEED_HMC5883L is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_LSM303DLH is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_TCS3414CS is not set
# CONFIG_PKG_USING_SEEED_MP503 is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_MP503 is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_BMP085 is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_HIGHTEMP is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_VEML6070 is not set
@ -967,12 +1006,14 @@ CONFIG_RT_USING_CPP_WRAPPER=y
# CONFIG_PKG_USING_ARDUINO_SEEED_MCP9600 is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_LTC2941 is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_LDC1612 is not set
# CONFIG_PKG_USING_ARDUINO_CAPACITIVESENSOR is not set
#
# Display
#
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_GFX_LIBRARY is not set
# CONFIG_PKG_USING_ARDUINO_U8G2 is not set
# CONFIG_PKG_USING_ARDUINO_TFT_ESPI is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ST7735 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SSD1306 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ILI9341 is not set
@ -981,6 +1022,7 @@ CONFIG_RT_USING_CPP_WRAPPER=y
#
# Timing
#
# CONFIG_PKG_USING_ARDUINO_RTCLIB is not set
# CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set
# CONFIG_PKG_USING_ARDUINO_TICKER is not set
# CONFIG_PKG_USING_ARDUINO_TASKSCHEDULER is not set
@ -990,6 +1032,7 @@ CONFIG_RT_USING_CPP_WRAPPER=y
#
# CONFIG_PKG_USING_ARDUINO_KALMANFILTER is not set
# CONFIG_PKG_USING_ARDUINO_ARDUINOJSON is not set
# CONFIG_PKG_USING_ARDUINO_TENSORFLOW_LITE_MICRO is not set
#
# Data Storage
@ -1006,18 +1049,17 @@ CONFIG_RT_USING_CPP_WRAPPER=y
#
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCF8574 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCA9685 is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_PCF85063TP is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TPA2016 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DRV2605 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DS1841 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DS3502 is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_PCF85063TP is not set
#
# Other
#
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MFRC630 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI5351 is not set
# CONFIG_PKG_USING_ARDUINO_RTCLIB is not set
#
# Signal IO

151
FW/Core/001-base_rt/USB/CONFIG/hw_config.c Normal file
View File

@ -0,0 +1,151 @@
#include "hw_config.h"
#include "usb_lib.h"
#include "usb_prop.h"
#include "usb_desc.h"
#include "usb_istr.h"
#include "usb_pwr.h"
#include "string.h"
#include "stdarg.h"
#include "stdio.h"
_usb_usart_fifo uu_txfifo; //USB串口发送FIFO结构体
u8 USART_PRINTF_Buffer[USB_USART_REC_LEN]; //usb_printf发送缓冲区
//用类似串口1接收数据的方法,来处理USB虚拟串口接收到的数据.
u8 USB_USART_RX_BUF[USB_USART_REC_LEN]; //接收缓冲,最大USART_REC_LEN个字节.
//接收状态
//bit15， 接收完成标志
//bit14， 接收到0x0d
//bit13~0， 接收到的有效字节数目
u16 USB_USART_RX_STA=0; //接收状态标记
extern LINE_CODING linecoding; //USB虚拟串口配置信息
////USB唤醒中断服务函数
//void USBWakeUp_IRQHandler(void)
//{
// EXTI_ClearITPendingBit(EXTI_Line18);//清除USB唤醒中断挂起位
//}
////USB中断处理函数
//void USB_LP_CAN1_RX0_IRQHandler(void)
//{
// USB_Istr();
//}
//USB时钟配置函数,USBclk=48Mhz@HCLK=72Mhz
void Set_USBClock(void)
{
RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_4Div5);//USBclk=PLLclk/4.5=48Mhz
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE); //USB时钟使能
}
//USB进入低功耗模式
//当USB进入suspend模式时,MCU进入低功耗模式
//需自行添加低功耗代码(比如关时钟等)
void Enter_LowPowerMode(void)
{
printf("usb enter low power mode\r\n");
bDeviceState=SUSPENDED;
}
//USB退出低功耗模式
//用户可以自行添加相关代码(比如重新配置时钟等)
void Leave_LowPowerMode(void)
{
DEVICE_INFO *pInfo=&Device_Info;
printf("leave low power mode\r\n");
if (pInfo->Current_Configuration!=0)bDeviceState=CONFIGURED;
else bDeviceState = ATTACHED;
}
//USB中断配置
void USB_Interrupts_Config(void)
{
NVIC_InitTypeDef NVIC_InitStructure;
EXTI_InitTypeDef EXTI_InitStructure;
/* Configure the EXTI line 18 connected internally to the USB IP */
EXTI_ClearITPendingBit(EXTI_Line18);
// 开启线18上的中断
EXTI_InitStructure.EXTI_Line = EXTI_Line18; // USB resume from suspend mode
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; //line 18上事件上升降沿触发
EXTI_InitStructure.EXTI_LineCmd = ENABLE;
EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
EXTI_Init(&EXTI_InitStructure);
/* Enable the USB interrupt */
NVIC_InitStructure.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
/* Enable the USB Wake-up interrupt */
NVIC_InitStructure.NVIC_IRQChannel = USBWakeUp_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_Init(&NVIC_InitStructure);
}
//USB接口配置
//NewState:DISABLE,不上拉
// ENABLE,上拉
void USB_Cable_Config (FunctionalState NewState)
{
if (NewState!=DISABLE)printf("usb pull up enable\r\n");
else printf("usb pull up disable\r\n");
}
//USB使能连接/断线
//enable:0,断开
// 1,允许连接
void USB_Port_Set(u8 enable)
{
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA,ENABLE); //使能PORTA时钟
if(enable)_SetCNTR(_GetCNTR()&(~(1<<1)));//退出断电模式
else
{
_SetCNTR(_GetCNTR()|(1<<1)); // 断电模式
GPIOA->CRH&=0XFFF00FFF;
GPIOA->CRH|=0X00033000;
PAout(12)=0;
}
}
//用于USB配置信息
void Get_SerialNum(void)
{
u32 Device_Serial0, Device_Serial1, Device_Serial2;
Device_Serial0 = *(u32*)(0x1FFFF7E8);
Device_Serial1 = *(u32*)(0x1FFFF7EC);
Device_Serial2 = *(u32*)(0x1FFFF7F0);
Device_Serial0 += Device_Serial2;
if (Device_Serial0 != 0)
{
IntToUnicode (Device_Serial0,&Virtual_Com_Port_StringSerial[2], 8);
IntToUnicode (Device_Serial1,&Virtual_Com_Port_StringSerial[18], 4);
}
}
//将32位的值转换成unicode.
//value,要转换的值(32bit)
//pbuf:存储地址
//len:要转换的长度
void IntToUnicode (u32 value, u8 *pbuf, u8 len)
{
u8 idx = 0;
for( idx = 0 ; idx < len ; idx ++)
{
if( ((value >> 28)) < 0xA )
{
pbuf[ 2* idx] = (value >> 28) + '0';
}
else
{
pbuf[2* idx] = (value >> 28) + 'A' - 10;
}
value = value << 4;
pbuf[ 2* idx + 1] = 0;
}
}
/////////////////////////////////////////////////////////////////////////////////

35
FW/Core/001-base_rt/USB/CONFIG/hw_config.h Normal file
View File

@ -0,0 +1,35 @@
#ifndef __HW_CONFIG_H
#define __HW_CONFIG_H
#include "platform_config.h"
#include "usb_type.h"
#define USB_USART_TXFIFO_SIZE 1024 //USB虚拟串口发送FIFO大小
#define USB_USART_REC_LEN 200 //USB串口接收缓冲区最大字节数
//定义一个USB USART FIFO结构体
typedef struct
{
u8 buffer[USB_USART_TXFIFO_SIZE]; //buffer
vu16 writeptr; //写指针
vu16 readptr; //读指针
} _usb_usart_fifo;
extern _usb_usart_fifo uu_txfifo; //USB串口发送FIFO
extern u8 USB_USART_RX_BUF[USB_USART_REC_LEN]; //接收缓冲,最大USB_USART_REC_LEN个字节.末字节为换行符
extern u16 USB_USART_RX_STA; //接收状态标记
//USB通用代码函数声明
void Set_USBClock(void);
void Enter_LowPowerMode(void);
void Leave_LowPowerMode(void);
void USB_Interrupts_Config(void);
void USB_Cable_Config (FunctionalState NewState);
void USB_Port_Set(u8 enable);
void IntToUnicode (u32 value,u8 *pbuf,u8 len);
void Get_SerialNum(void);
#endif

50
FW/Core/001-base_rt/USB/CONFIG/platform_config.h Normal file
View File

@ -0,0 +1,50 @@
/**
******************************************************************************
* @file platform_config.h
* @author MCD Application Team
* @version V4.0.0
* @date 21-January-2013
* @brief Evaluation board specific configuration file.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __PLATFORM_CONFIG_H
#define __PLATFORM_CONFIG_H
/* Includes ------------------------------------------------------------------*/
#include "system.h"
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Uncomment the line corresponding to the STMicroelectronics evaluation board
used to run the example */
#define USE_STM3210E_EVAL //STM32F10XʹÓõİ汾
#endif /* __PLATFORM_CONFIG_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

103
FW/Core/001-base_rt/USB/CONFIG/usb_conf.h Normal file
View File

@ -0,0 +1,103 @@
/**
******************************************************************************
* @file usb_conf.h
* @author MCD Application Team
* @version V4.0.0
* @date 21-January-2013
* @brief Virtual COM Port Demo configuration header
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_CONF_H
#define __USB_CONF_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* External variables --------------------------------------------------------*/
/*-------------------------------------------------------------*/
/* EP_NUM */
/* defines how many endpoints are used by the device */
/*-------------------------------------------------------------*/
#define EP_NUM (4)
/*-------------------------------------------------------------*/
/* -------------- Buffer Description Table -----------------*/
/*-------------------------------------------------------------*/
/* buffer table base address */
/* buffer table base address */
#define BTABLE_ADDRESS (0x00)
/* EP0 */
/* rx/tx buffer base address */
#define ENDP0_RXADDR (0x40)
#define ENDP0_TXADDR (0x80)
/* EP1 */
/* tx buffer base address */
#define ENDP1_TXADDR (0xC0)
#define ENDP2_TXADDR (0x100)
#define ENDP3_RXADDR (0x110)
/*-------------------------------------------------------------*/
/* ------------------- ISTR events -------------------------*/
/*-------------------------------------------------------------*/
/* IMR_MSK */
/* mask defining which events has to be handled */
/* by the device application software */
#define IMR_MSK (CNTR_CTRM | CNTR_WKUPM | CNTR_SUSPM | CNTR_ERRM | CNTR_SOFM \
| CNTR_ESOFM | CNTR_RESETM )
/*#define CTR_CALLBACK*/
/*#define DOVR_CALLBACK*/
/*#define ERR_CALLBACK*/
/*#define WKUP_CALLBACK*/
/*#define SUSP_CALLBACK*/
/*#define RESET_CALLBACK*/
#define SOF_CALLBACK
/*#define ESOF_CALLBACK*/
/* CTR service routines */
/* associated to defined endpoints */
/*#define EP1_IN_Callback NOP_Process*/
#define EP2_IN_Callback NOP_Process
#define EP3_IN_Callback NOP_Process
#define EP4_IN_Callback NOP_Process
#define EP5_IN_Callback NOP_Process
#define EP6_IN_Callback NOP_Process
#define EP7_IN_Callback NOP_Process
#define EP1_OUT_Callback NOP_Process
#define EP2_OUT_Callback NOP_Process
/*#define EP3_OUT_Callback NOP_Process*/
#define EP4_OUT_Callback NOP_Process
#define EP5_OUT_Callback NOP_Process
#define EP6_OUT_Callback NOP_Process
#define EP7_OUT_Callback NOP_Process
#endif /* __USB_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

172
FW/Core/001-base_rt/USB/CONFIG/usb_desc.c Normal file
View File

@ -0,0 +1,172 @@
/**
******************************************************************************
* @file usb_desc.c
* @author MCD Application Team
* @version V4.0.0
* @date 21-January-2013
* @brief Descriptors for Virtual Com Port Demo
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
#include "usb_desc.h"
/* USB Standard Device Descriptor */
const uint8_t Virtual_Com_Port_DeviceDescriptor[] =
{
0x12, /* bLength */
USB_DEVICE_DESCRIPTOR_TYPE, /* bDescriptorType */
0x00,
0x02, /* bcdUSB = 2.00 */
0x02, /* bDeviceClass: CDC */
0x00, /* bDeviceSubClass */
0x00, /* bDeviceProtocol */
0x40, /* bMaxPacketSize0 */
0x83,
0x04, /* idVendor = 0x0483 */
0x40,
0x57, /* idProduct = 0x7540 */
0x00,
0x02, /* bcdDevice = 2.00 */
1, /* Index of string descriptor describing manufacturer */
2, /* Index of string descriptor describing product */
3, /* Index of string descriptor describing the device's serial number */
0x01 /* bNumConfigurations */
};
const uint8_t Virtual_Com_Port_ConfigDescriptor[] =
{
/*Configuration Descriptor*/
0x09, /* bLength: Configuration Descriptor size */
USB_CONFIGURATION_DESCRIPTOR_TYPE, /* bDescriptorType: Configuration */
VIRTUAL_COM_PORT_SIZ_CONFIG_DESC, /* wTotalLength:no of returned bytes */
0x00,
0x02, /* bNumInterfaces: 2 interface */
0x01, /* bConfigurationValue: Configuration value */
0x00, /* iConfiguration: Index of string descriptor describing the configuration */
0xC0, /* bmAttributes: self powered */
0x32, /* MaxPower 0 mA */
/*Interface Descriptor*/
0x09, /* bLength: Interface Descriptor size */
USB_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType: Interface */
/* Interface descriptor type */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x01, /* bNumEndpoints: One endpoints used */
0x02, /* bInterfaceClass: Communication Interface Class */
0x02, /* bInterfaceSubClass: Abstract Control Model */
0x01, /* bInterfaceProtocol: Common AT commands */
0x00, /* iInterface: */
/*Header Functional Descriptor*/
0x05, /* bLength: Endpoint Descriptor size */
0x24, /* bDescriptorType: CS_INTERFACE */
0x00, /* bDescriptorSubtype: Header Func Desc */
0x10, /* bcdCDC: spec release number */
0x01,
/*Call Management Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x01, /* bDescriptorSubtype: Call Management Func Desc */
0x00, /* bmCapabilities: D0+D1 */
0x01, /* bDataInterface: 1 */
/*ACM Functional Descriptor*/
0x04, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x02, /* bDescriptorSubtype: Abstract Control Management desc */
0x02, /* bmCapabilities */
/*Union Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x06, /* bDescriptorSubtype: Union func desc */
0x00, /* bMasterInterface: Communication class interface */
0x01, /* bSlaveInterface0: Data Class Interface */
/*Endpoint 2 Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType: Endpoint */
0x82, /* bEndpointAddress: (IN2) */
0x03, /* bmAttributes: Interrupt */
VIRTUAL_COM_PORT_INT_SIZE, /* wMaxPacketSize: */
0x00,
0xFF, /* bInterval: */
/*Data class interface descriptor*/
0x09, /* bLength: Endpoint Descriptor size */
USB_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType: */
0x01, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints: Two endpoints used */
0x0A, /* bInterfaceClass: CDC */
0x00, /* bInterfaceSubClass: */
0x00, /* bInterfaceProtocol: */
0x00, /* iInterface: */
/*Endpoint 3 Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType: Endpoint */
0x03, /* bEndpointAddress: (OUT3) */
0x02, /* bmAttributes: Bulk */
VIRTUAL_COM_PORT_DATA_SIZE, /* wMaxPacketSize: */
0x00,
0x00, /* bInterval: ignore for Bulk transfer */
/*Endpoint 1 Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType: Endpoint */
0x81, /* bEndpointAddress: (IN1) */
0x02, /* bmAttributes: Bulk */
VIRTUAL_COM_PORT_DATA_SIZE, /* wMaxPacketSize: */
0x00,
0x00 /* bInterval */
};
/* USB String Descriptors */
const uint8_t Virtual_Com_Port_StringLangID[VIRTUAL_COM_PORT_SIZ_STRING_LANGID] =
{
VIRTUAL_COM_PORT_SIZ_STRING_LANGID,
USB_STRING_DESCRIPTOR_TYPE,
0x09,
0x04 /* LangID = 0x0409: U.S. English */
};
const uint8_t Virtual_Com_Port_StringVendor[VIRTUAL_COM_PORT_SIZ_STRING_VENDOR] =
{
VIRTUAL_COM_PORT_SIZ_STRING_VENDOR, /* Size of Vendor string */
USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType*/
/* Manufacturer: "HYH" */
'H', 0, 'Y', 0, 'H', 0,
};
const uint8_t Virtual_Com_Port_StringProduct[VIRTUAL_COM_PORT_SIZ_STRING_PRODUCT] =
{
VIRTUAL_COM_PORT_SIZ_STRING_PRODUCT, /* bLength */
USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */
/* Product name: "ExtBoard-001-Core" */
'E', 0, 'x', 0, 't', 0, 'B', 0, 'o', 0, 'a', 0, 'r', 0, 'd', 0,
'-', 0, '0', 0, '0', 0, '1', 0, '-', 0, 'C', 0, 'o', 0, 'r', 0,
'e', 0
};
uint8_t Virtual_Com_Port_StringSerial[VIRTUAL_COM_PORT_SIZ_STRING_SERIAL] =
{
VIRTUAL_COM_PORT_SIZ_STRING_SERIAL, /* bLength */
USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */
'H', 0, 'Y', 0, 'H', 0, ' ', 0, ' ', 0
};
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

66
FW/Core/001-base_rt/USB/CONFIG/usb_desc.h Normal file
View File

@ -0,0 +1,66 @@
/**
******************************************************************************
* @file usb_desc.h
* @author MCD Application Team
* @version V4.0.0
* @date 21-January-2013
* @brief Descriptor Header for Virtual COM Port Device
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_DESC_H
#define __USB_DESC_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported define -----------------------------------------------------------*/
#define USB_DEVICE_DESCRIPTOR_TYPE 0x01
#define USB_CONFIGURATION_DESCRIPTOR_TYPE 0x02
#define USB_STRING_DESCRIPTOR_TYPE 0x03
#define USB_INTERFACE_DESCRIPTOR_TYPE 0x04
#define USB_ENDPOINT_DESCRIPTOR_TYPE 0x05
#define VIRTUAL_COM_PORT_DATA_SIZE 64
#define VIRTUAL_COM_PORT_INT_SIZE 8
#define VIRTUAL_COM_PORT_SIZ_DEVICE_DESC 18
#define VIRTUAL_COM_PORT_SIZ_CONFIG_DESC 67
#define VIRTUAL_COM_PORT_SIZ_STRING_LANGID 4
#define VIRTUAL_COM_PORT_SIZ_STRING_VENDOR 8
#define VIRTUAL_COM_PORT_SIZ_STRING_PRODUCT 36
#define VIRTUAL_COM_PORT_SIZ_STRING_SERIAL 26
#define STANDARD_ENDPOINT_DESC_SIZE 0x09
/* Exported functions ------------------------------------------------------- */
extern const uint8_t Virtual_Com_Port_DeviceDescriptor[VIRTUAL_COM_PORT_SIZ_DEVICE_DESC];
extern const uint8_t Virtual_Com_Port_ConfigDescriptor[VIRTUAL_COM_PORT_SIZ_CONFIG_DESC];
extern const uint8_t Virtual_Com_Port_StringLangID[VIRTUAL_COM_PORT_SIZ_STRING_LANGID];
extern const uint8_t Virtual_Com_Port_StringVendor[VIRTUAL_COM_PORT_SIZ_STRING_VENDOR];
extern const uint8_t Virtual_Com_Port_StringProduct[VIRTUAL_COM_PORT_SIZ_STRING_PRODUCT];
extern uint8_t Virtual_Com_Port_StringSerial[VIRTUAL_COM_PORT_SIZ_STRING_SERIAL];
#endif /* __USB_DESC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

128
FW/Core/001-base_rt/USB/CONFIG/usb_endp.c Normal file
View File

@ -0,0 +1,128 @@
/**
******************************************************************************
* @file usb_endp.c
* @author MCD Application Team
* @version V4.0.0
* @date 21-January-2013
* @brief Endpoint routines
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
#include "usb_desc.h"
#include "usb_mem.h"
#include "hw_config.h"
#include "usb_istr.h"
#include "usb_pwr.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Interval between sending IN packets in frame number (1 frame = 1ms) */
#define VCOMPORT_IN_FRAME_INTERVAL 5
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
uint8_t USB_Rx_Buffer[VIRTUAL_COM_PORT_DATA_SIZE];
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : EP1_IN_Callback
* Description :
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void EP1_IN_Callback (void)
{
u16 USB_Tx_ptr;
u16 USB_Tx_length;
if(uu_txfifo.readptr==uu_txfifo.writeptr) //无任何数据要发送,直接退出
{
return;
}
if(uu_txfifo.readptr<uu_txfifo.writeptr) //没有超过数组,读指针<写指针
{
USB_Tx_length=uu_txfifo.writeptr-uu_txfifo.readptr;//得到要发送的数据长度
} else //超过数组了 读指针>写指针
{
USB_Tx_length=USB_USART_TXFIFO_SIZE-uu_txfifo.readptr;//得到要发送的数据长度
}
if(USB_Tx_length>VIRTUAL_COM_PORT_DATA_SIZE) //超过64字节?
{
USB_Tx_length=VIRTUAL_COM_PORT_DATA_SIZE; //此次发送数据量
}
USB_Tx_ptr=uu_txfifo.readptr; //发送起始地址
uu_txfifo.readptr+=USB_Tx_length; //读指针偏移
if(uu_txfifo.readptr>=USB_USART_TXFIFO_SIZE) //读指针归零
{
uu_txfifo.readptr=0;
}
UserToPMABufferCopy(&uu_txfifo.buffer[USB_Tx_ptr], ENDP1_TXADDR, USB_Tx_length);
SetEPTxCount(ENDP1, USB_Tx_length);
SetEPTxValid(ENDP1);
}
/*******************************************************************************
* Function Name : EP3_OUT_Callback
* Description :
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void EP3_OUT_Callback(void)
{
u16 USB_Rx_Cnt;
USB_Rx_Cnt = USB_SIL_Read(EP3_OUT, USB_Rx_Buffer); //得到USB接收到的数据及其长度
SetEPRxValid(ENDP3); //时能端点3的数据接收
}
/*******************************************************************************
* Function Name : SOF_Callback / INTR_SOFINTR_Callback
* Description :
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void SOF_Callback(void)
{
static uint32_t FrameCount = 0;
if(bDeviceState == CONFIGURED)
{
if (FrameCount++ == VCOMPORT_IN_FRAME_INTERVAL)
{
/* Reset the frame counter */
FrameCount = 0;
/* Check the data to be sent through IN pipe */
EP1_IN_Callback();//通过EP1_IN_Callback函数实现TX数据发送给USB
//Handle_USBAsynchXfer();
}
}
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

233
FW/Core/001-base_rt/USB/CONFIG/usb_istr.c Normal file
View File

@ -0,0 +1,233 @@
/**
******************************************************************************
* @file usb_istr.c
* @author MCD Application Team
* @version V4.0.0
* @date 21-January-2013
* @brief ISTR events interrupt service routines
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
#include "usb_prop.h"
#include "usb_pwr.h"
#include "usb_istr.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
__IO uint16_t wIstr; /* ISTR register last read value */
__IO uint8_t bIntPackSOF = 0; /* SOFs received between 2 consecutive packets */
__IO uint32_t esof_counter =0; /* expected SOF counter */
__IO uint32_t wCNTR=0;
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/* function pointers to non-control endpoints service routines */
void (*pEpInt_IN[7])(void) =
{
EP1_IN_Callback,
EP2_IN_Callback,
EP3_IN_Callback,
EP4_IN_Callback,
EP5_IN_Callback,
EP6_IN_Callback,
EP7_IN_Callback,
};
void (*pEpInt_OUT[7])(void) =
{
EP1_OUT_Callback,
EP2_OUT_Callback,
EP3_OUT_Callback,
EP4_OUT_Callback,
EP5_OUT_Callback,
EP6_OUT_Callback,
EP7_OUT_Callback,
};
/*******************************************************************************
* Function Name : USB_Istr
* Description : ISTR events interrupt service routine
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void USB_Istr(void)
{
uint32_t i=0;
__IO uint32_t EP[8];
wIstr = _GetISTR();
#if (IMR_MSK & ISTR_SOF)
if (wIstr & ISTR_SOF & wInterrupt_Mask)
{
_SetISTR((uint16_t)CLR_SOF);
bIntPackSOF++;
#ifdef SOF_CALLBACK
SOF_Callback();
#endif
}
#endif
/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
#if (IMR_MSK & ISTR_CTR)
if (wIstr & ISTR_CTR & wInterrupt_Mask)
{
/* servicing of the endpoint correct transfer interrupt */
/* clear of the CTR flag into the sub */
CTR_LP();
#ifdef CTR_CALLBACK
CTR_Callback();
#endif
}
#endif
/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
#if (IMR_MSK & ISTR_RESET)
if (wIstr & ISTR_RESET & wInterrupt_Mask)
{
_SetISTR((uint16_t)CLR_RESET);
Device_Property.Reset();
#ifdef RESET_CALLBACK
RESET_Callback();
#endif
}
#endif
/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
#if (IMR_MSK & ISTR_DOVR)
if (wIstr & ISTR_DOVR & wInterrupt_Mask)
{
_SetISTR((uint16_t)CLR_DOVR);
#ifdef DOVR_CALLBACK
DOVR_Callback();
#endif
}
#endif
/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
#if (IMR_MSK & ISTR_ERR)
if (wIstr & ISTR_ERR & wInterrupt_Mask)
{
_SetISTR((uint16_t)CLR_ERR);
#ifdef ERR_CALLBACK
ERR_Callback();
#endif
}
#endif
/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
#if (IMR_MSK & ISTR_WKUP)
if (wIstr & ISTR_WKUP & wInterrupt_Mask)
{
_SetISTR((uint16_t)CLR_WKUP);
Resume(RESUME_EXTERNAL);
#ifdef WKUP_CALLBACK
WKUP_Callback();
#endif
}
#endif
/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
#if (IMR_MSK & ISTR_SUSP)
if (wIstr & ISTR_SUSP & wInterrupt_Mask)
{
/* check if SUSPEND is possible */
if (fSuspendEnabled)
{
Suspend();
}
else
{
/* if not possible then resume after xx ms */
Resume(RESUME_LATER);
}
/* clear of the ISTR bit must be done after setting of CNTR_FSUSP */
_SetISTR((uint16_t)CLR_SUSP);
#ifdef SUSP_CALLBACK
SUSP_Callback();
#endif
}
#endif
/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
#if (IMR_MSK & ISTR_ESOF)
if (wIstr & ISTR_ESOF & wInterrupt_Mask)
{
/* clear ESOF flag in ISTR */
_SetISTR((uint16_t)CLR_ESOF);
if ((_GetFNR()&FNR_RXDP)!=0)
{
/* increment ESOF counter */
esof_counter ++;
/* test if we enter in ESOF more than 3 times with FSUSP =0 and RXDP =1=>> possible missing SUSP flag*/
if ((esof_counter >3)&&((_GetCNTR()&CNTR_FSUSP)==0))
{
/* this a sequence to apply a force RESET*/
/*Store CNTR value */
wCNTR = _GetCNTR();
/*Store endpoints registers status */
for (i=0; i<8; i++) EP[i] = _GetENDPOINT(i);
/*apply FRES */
wCNTR|=CNTR_FRES;
_SetCNTR(wCNTR);
/*clear FRES*/
wCNTR&=~CNTR_FRES;
_SetCNTR(wCNTR);
/*poll for RESET flag in ISTR*/
while((_GetISTR()&ISTR_RESET) == 0);
/* clear RESET flag in ISTR */
_SetISTR((uint16_t)CLR_RESET);
/*restore Enpoints*/
for (i=0; i<8; i++)
_SetENDPOINT(i, EP[i]);
esof_counter = 0;
}
}
else
{
esof_counter = 0;
}
/* resume handling timing is made with ESOFs */
Resume(RESUME_ESOF); /* request without change of the machine state */
#ifdef ESOF_CALLBACK
ESOF_Callback();
#endif
}
#endif
} /* USB_Istr */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

94
FW/Core/001-base_rt/USB/CONFIG/usb_istr.h Normal file
View File

@ -0,0 +1,94 @@
/**
******************************************************************************
* @file usb_istr.h
* @author MCD Application Team
* @version V4.0.0
* @date 21-January-2013
* @brief This file includes the peripherals header files in the user application.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_ISTR_H
#define __USB_ISTR_H
/* Includes ------------------------------------------------------------------*/
#include "usb_conf.h"
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void USB_Istr(void);
/* function prototypes Automatically built defining related macros */
void EP1_IN_Callback(void);
void EP2_IN_Callback(void);
void EP3_IN_Callback(void);
void EP4_IN_Callback(void);
void EP5_IN_Callback(void);
void EP6_IN_Callback(void);
void EP7_IN_Callback(void);
void EP1_OUT_Callback(void);
void EP2_OUT_Callback(void);
void EP3_OUT_Callback(void);
void EP4_OUT_Callback(void);
void EP5_OUT_Callback(void);
void EP6_OUT_Callback(void);
void EP7_OUT_Callback(void);
#ifdef CTR_CALLBACK
void CTR_Callback(void);
#endif
#ifdef DOVR_CALLBACK
void DOVR_Callback(void);
#endif
#ifdef ERR_CALLBACK
void ERR_Callback(void);
#endif
#ifdef WKUP_CALLBACK
void WKUP_Callback(void);
#endif
#ifdef SUSP_CALLBACK
void SUSP_Callback(void);
#endif
#ifdef RESET_CALLBACK
void RESET_Callback(void);
#endif
#ifdef SOF_CALLBACK
void SOF_Callback(void);
#endif
#ifdef ESOF_CALLBACK
void ESOF_Callback(void);
#endif
#endif /*__USB_ISTR_H*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

418
FW/Core/001-base_rt/USB/CONFIG/usb_prop.c Normal file
View File

@ -0,0 +1,418 @@
/**
******************************************************************************
* @file usb_prop.c
* @author MCD Application Team
* @version V4.0.0
* @date 21-January-2013
* @brief All processing related to Virtual Com Port Demo
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
#include "usb_conf.h"
#include "usb_prop.h"
#include "usb_desc.h"
#include "usb_pwr.h"
#include "hw_config.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
uint8_t Request = 0;
LINE_CODING linecoding =
{
115200, /* baud rate*/
0x00, /* stop bits-1*/
0x00, /* parity - none*/
0x08 /* no. of bits 8*/
};
/* -------------------------------------------------------------------------- */
/* Structures initializations */
/* -------------------------------------------------------------------------- */
DEVICE Device_Table =
{
EP_NUM,
1
};
DEVICE_PROP Device_Property =
{
Virtual_Com_Port_init,
Virtual_Com_Port_Reset,
Virtual_Com_Port_Status_In,
Virtual_Com_Port_Status_Out,
Virtual_Com_Port_Data_Setup,
Virtual_Com_Port_NoData_Setup,
Virtual_Com_Port_Get_Interface_Setting,
Virtual_Com_Port_GetDeviceDescriptor,
Virtual_Com_Port_GetConfigDescriptor,
Virtual_Com_Port_GetStringDescriptor,
0,
0x40 /*MAX PACKET SIZE*/
};
USER_STANDARD_REQUESTS User_Standard_Requests =
{
Virtual_Com_Port_GetConfiguration,
Virtual_Com_Port_SetConfiguration,
Virtual_Com_Port_GetInterface,
Virtual_Com_Port_SetInterface,
Virtual_Com_Port_GetStatus,
Virtual_Com_Port_ClearFeature,
Virtual_Com_Port_SetEndPointFeature,
Virtual_Com_Port_SetDeviceFeature,
Virtual_Com_Port_SetDeviceAddress
};
ONE_DESCRIPTOR Device_Descriptor =
{
(uint8_t*)Virtual_Com_Port_DeviceDescriptor,
VIRTUAL_COM_PORT_SIZ_DEVICE_DESC
};
ONE_DESCRIPTOR Config_Descriptor =
{
(uint8_t*)Virtual_Com_Port_ConfigDescriptor,
VIRTUAL_COM_PORT_SIZ_CONFIG_DESC
};
ONE_DESCRIPTOR String_Descriptor[4] =
{
{(uint8_t*)Virtual_Com_Port_StringLangID, VIRTUAL_COM_PORT_SIZ_STRING_LANGID},
{(uint8_t*)Virtual_Com_Port_StringVendor, VIRTUAL_COM_PORT_SIZ_STRING_VENDOR},
{(uint8_t*)Virtual_Com_Port_StringProduct, VIRTUAL_COM_PORT_SIZ_STRING_PRODUCT},
{(uint8_t*)Virtual_Com_Port_StringSerial, VIRTUAL_COM_PORT_SIZ_STRING_SERIAL}
};
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Extern function prototypes ------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : Virtual_Com_Port_init.
* Description : Virtual COM Port Mouse init routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void Virtual_Com_Port_init(void)
{
/* Update the serial number string descriptor with the data from the unique
ID*/
Get_SerialNum();
pInformation->Current_Configuration = 0;
/* Connect the device */
PowerOn();
/* Perform basic device initialization operations */
USB_SIL_Init();
/* configure the USART to the default settings */
bDeviceState = UNCONNECTED;
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_Reset
* Description : Virtual_Com_Port Mouse reset routine
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void Virtual_Com_Port_Reset(void)
{
/* Set Virtual_Com_Port DEVICE as not configured */
pInformation->Current_Configuration = 0;
/* Current Feature initialization */
pInformation->Current_Feature = Virtual_Com_Port_ConfigDescriptor[7];
/* Set Virtual_Com_Port DEVICE with the default Interface*/
pInformation->Current_Interface = 0;
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_STALL);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxStatus(ENDP1, EP_TX_NAK);
SetEPRxStatus(ENDP1, EP_RX_DIS);
/* Initialize Endpoint 2 */
SetEPType(ENDP2, EP_INTERRUPT);
SetEPTxAddr(ENDP2, ENDP2_TXADDR);
SetEPRxStatus(ENDP2, EP_RX_DIS);
SetEPTxStatus(ENDP2, EP_TX_NAK);
/* Initialize Endpoint 3 */
SetEPType(ENDP3, EP_BULK);
SetEPRxAddr(ENDP3, ENDP3_RXADDR);
SetEPRxCount(ENDP3, VIRTUAL_COM_PORT_DATA_SIZE);
SetEPRxStatus(ENDP3, EP_RX_VALID);
SetEPTxStatus(ENDP3, EP_TX_DIS);
/* Set this device to response on default address */
SetDeviceAddress(0);
bDeviceState = ATTACHED;
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_SetConfiguration.
* Description : Update the device state to configured.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void Virtual_Com_Port_SetConfiguration(void)
{
DEVICE_INFO *pInfo = &Device_Info;
if (pInfo->Current_Configuration != 0)
{
/* Device configured */
bDeviceState = CONFIGURED;
}
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_SetConfiguration.
* Description : Update the device state to addressed.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void Virtual_Com_Port_SetDeviceAddress (void)
{
bDeviceState = ADDRESSED;
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_Status_In.
* Description : Virtual COM Port Status In Routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void Virtual_Com_Port_Status_In(void)
{
if (Request == SET_LINE_CODING)
{
Request = 0;
}
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_Status_Out
* Description : Virtual COM Port Status OUT Routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void Virtual_Com_Port_Status_Out(void)
{
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_Data_Setup
* Description : handle the data class specific requests
* Input : Request Nb.
* Output : None.
* Return : USB_UNSUPPORT or USB_SUCCESS.
*******************************************************************************/
RESULT Virtual_Com_Port_Data_Setup(uint8_t RequestNo)
{
uint8_t *(*CopyRoutine)(uint16_t);
CopyRoutine = NULL;
if (RequestNo == GET_LINE_CODING)
{
if (Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT))
{
CopyRoutine = Virtual_Com_Port_GetLineCoding;
}
}
else if (RequestNo == SET_LINE_CODING)
{
if (Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT))
{
CopyRoutine = Virtual_Com_Port_SetLineCoding;
}
Request = SET_LINE_CODING;
}
if (CopyRoutine == NULL)
{
return USB_UNSUPPORT;
}
pInformation->Ctrl_Info.CopyData = CopyRoutine;
pInformation->Ctrl_Info.Usb_wOffset = 0;
(*CopyRoutine)(0);
return USB_SUCCESS;
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_NoData_Setup.
* Description : handle the no data class specific requests.
* Input : Request Nb.
* Output : None.
* Return : USB_UNSUPPORT or USB_SUCCESS.
*******************************************************************************/
RESULT Virtual_Com_Port_NoData_Setup(uint8_t RequestNo)
{
if (Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT))
{
if (RequestNo == SET_COMM_FEATURE)
{
return USB_SUCCESS;
}
else if (RequestNo == SET_CONTROL_LINE_STATE)
{
return USB_SUCCESS;
}
}
return USB_UNSUPPORT;
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_GetDeviceDescriptor.
* Description : Gets the device descriptor.
* Input : Length.
* Output : None.
* Return : The address of the device descriptor.
*******************************************************************************/
uint8_t *Virtual_Com_Port_GetDeviceDescriptor(uint16_t Length)
{
return Standard_GetDescriptorData(Length, &Device_Descriptor);
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_GetConfigDescriptor.
* Description : get the configuration descriptor.
* Input : Length.
* Output : None.
* Return : The address of the configuration descriptor.
*******************************************************************************/
uint8_t *Virtual_Com_Port_GetConfigDescriptor(uint16_t Length)
{
return Standard_GetDescriptorData(Length, &Config_Descriptor);
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_GetStringDescriptor
* Description : Gets the string descriptors according to the needed index
* Input : Length.
* Output : None.
* Return : The address of the string descriptors.
*******************************************************************************/
uint8_t *Virtual_Com_Port_GetStringDescriptor(uint16_t Length)
{
uint8_t wValue0 = pInformation->USBwValue0;
if (wValue0 > 4)
{
return NULL;
}
else
{
return Standard_GetDescriptorData(Length, &String_Descriptor[wValue0]);
}
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_Get_Interface_Setting.
* Description : test the interface and the alternate setting according to the
* supported one.
* Input1 : uint8_t: Interface : interface number.
* Input2 : uint8_t: AlternateSetting : Alternate Setting number.
* Output : None.
* Return : The address of the string descriptors.
*******************************************************************************/
RESULT Virtual_Com_Port_Get_Interface_Setting(uint8_t Interface, uint8_t AlternateSetting)
{
if (AlternateSetting > 0)
{
return USB_UNSUPPORT;
}
else if (Interface > 1)
{
return USB_UNSUPPORT;
}
return USB_SUCCESS;
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_GetLineCoding.
* Description : send the linecoding structure to the PC host.
* Input : Length.
* Output : None.
* Return : Linecoding structure base address.
*******************************************************************************/
uint8_t *Virtual_Com_Port_GetLineCoding(uint16_t Length)
{
if (Length == 0)
{
pInformation->Ctrl_Info.Usb_wLength = sizeof(linecoding);
return NULL;
}
return(uint8_t *)&linecoding;
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_SetLineCoding.
* Description : Set the linecoding structure fields.
* Input : Length.
* Output : None.
* Return : Linecoding structure base address.
*******************************************************************************/
uint8_t *Virtual_Com_Port_SetLineCoding(uint16_t Length)
{
if (Length == 0)
{
pInformation->Ctrl_Info.Usb_wLength = sizeof(linecoding);
return NULL;
}
return(uint8_t *)&linecoding;
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

87
FW/Core/001-base_rt/USB/CONFIG/usb_prop.h Normal file
View File

@ -0,0 +1,87 @@
/**
******************************************************************************
* @file usb_prop.h
* @author MCD Application Team
* @version V4.0.0
* @date 21-January-2013
* @brief All processing related to Virtual COM Port Demo (Endpoint 0)
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __usb_prop_H
#define __usb_prop_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
typedef struct
{
uint32_t bitrate;
uint8_t format;
uint8_t paritytype;
uint8_t datatype;
} LINE_CODING;
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported define -----------------------------------------------------------*/
#define Virtual_Com_Port_GetConfiguration NOP_Process
//#define Virtual_Com_Port_SetConfiguration NOP_Process
#define Virtual_Com_Port_GetInterface NOP_Process
#define Virtual_Com_Port_SetInterface NOP_Process
#define Virtual_Com_Port_GetStatus NOP_Process
#define Virtual_Com_Port_ClearFeature NOP_Process
#define Virtual_Com_Port_SetEndPointFeature NOP_Process
#define Virtual_Com_Port_SetDeviceFeature NOP_Process
//#define Virtual_Com_Port_SetDeviceAddress NOP_Process
#define SEND_ENCAPSULATED_COMMAND 0x00
#define GET_ENCAPSULATED_RESPONSE 0x01
#define SET_COMM_FEATURE 0x02
#define GET_COMM_FEATURE 0x03
#define CLEAR_COMM_FEATURE 0x04
#define SET_LINE_CODING 0x20
#define GET_LINE_CODING 0x21
#define SET_CONTROL_LINE_STATE 0x22
#define SEND_BREAK 0x23
/* Exported functions ------------------------------------------------------- */
void Virtual_Com_Port_init(void);
void Virtual_Com_Port_Reset(void);
void Virtual_Com_Port_SetConfiguration(void);
void Virtual_Com_Port_SetDeviceAddress (void);
void Virtual_Com_Port_Status_In (void);
void Virtual_Com_Port_Status_Out (void);
RESULT Virtual_Com_Port_Data_Setup(uint8_t);
RESULT Virtual_Com_Port_NoData_Setup(uint8_t);
RESULT Virtual_Com_Port_Get_Interface_Setting(uint8_t Interface, uint8_t AlternateSetting);
uint8_t *Virtual_Com_Port_GetDeviceDescriptor(uint16_t );
uint8_t *Virtual_Com_Port_GetConfigDescriptor(uint16_t);
uint8_t *Virtual_Com_Port_GetStringDescriptor(uint16_t);
uint8_t *Virtual_Com_Port_GetLineCoding(uint16_t Length);
uint8_t *Virtual_Com_Port_SetLineCoding(uint16_t Length);
#endif /* __usb_prop_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

270
FW/Core/001-base_rt/USB/CONFIG/usb_pwr.c Normal file
View File

@ -0,0 +1,270 @@
/**
******************************************************************************
* @file usb_pwr.c
* @author MCD Application Team
* @version V4.0.0
* @date 21-January-2013
* @brief Connection/disconnection & power management
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
#include "usb_conf.h"
#include "usb_pwr.h"
#include "hw_config.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
__IO uint32_t bDeviceState = UNCONNECTED; /* USB device status */
__IO bool fSuspendEnabled = TRUE; /* true when suspend is possible */
__IO uint32_t EP[8];
struct
{
__IO RESUME_STATE eState;
__IO uint8_t bESOFcnt;
}
ResumeS;
__IO uint32_t remotewakeupon=0;
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Extern function prototypes ------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : PowerOn
* Description :
* Input : None.
* Output : None.
* Return : USB_SUCCESS.
*******************************************************************************/
RESULT PowerOn(void)
{
uint16_t wRegVal;
/*** cable plugged-in ? ***/
USB_Cable_Config(ENABLE);
/*** CNTR_PWDN = 0 ***/
wRegVal = CNTR_FRES;
_SetCNTR(wRegVal);
/*** CNTR_FRES = 0 ***/
wInterrupt_Mask = 0;
_SetCNTR(wInterrupt_Mask);
/*** Clear pending interrupts ***/
_SetISTR(0);
/*** Set interrupt mask ***/
wInterrupt_Mask = CNTR_RESETM | CNTR_SUSPM | CNTR_WKUPM;
_SetCNTR(wInterrupt_Mask);
return USB_SUCCESS;
}
/*******************************************************************************
* Function Name : PowerOff
* Description : handles switch-off conditions
* Input : None.
* Output : None.
* Return : USB_SUCCESS.
*******************************************************************************/
RESULT PowerOff()
{
/* disable all interrupts and force USB reset */
_SetCNTR(CNTR_FRES);
/* clear interrupt status register */
_SetISTR(0);
/* Disable the Pull-Up*/
USB_Cable_Config(DISABLE);
/* switch-off device */
_SetCNTR(CNTR_FRES + CNTR_PDWN);
/* sw variables reset */
/* ... */
return USB_SUCCESS;
}
/*******************************************************************************
* Function Name : Suspend
* Description : sets suspend mode operating conditions
* Input : None.
* Output : None.
* Return : USB_SUCCESS.
*******************************************************************************/
void Suspend(void)
{
uint32_t i =0;
uint16_t wCNTR;
__IO uint32_t savePWR_CR=0;
/* suspend preparation */
/* ... */
/*Store CNTR value */
wCNTR = _GetCNTR();
/* This a sequence to apply a force RESET to handle a robustness case */
/*Store endpoints registers status */
for (i=0; i<8; i++) EP[i] = _GetENDPOINT(i);
/* unmask RESET flag */
wCNTR|=CNTR_RESETM;
_SetCNTR(wCNTR);
/*apply FRES */
wCNTR|=CNTR_FRES;
_SetCNTR(wCNTR);
/*clear FRES*/
wCNTR&=~CNTR_FRES;
_SetCNTR(wCNTR);
/*poll for RESET flag in ISTR*/
while((_GetISTR()&ISTR_RESET) == 0);
/* clear RESET flag in ISTR */
_SetISTR((uint16_t)CLR_RESET);
/*restore Enpoints*/
for (i=0; i<8; i++)
_SetENDPOINT(i, EP[i]);
/* Now it is safe to enter macrocell in suspend mode */
wCNTR |= CNTR_FSUSP;
_SetCNTR(wCNTR);
/* force low-power mode in the macrocell */
wCNTR = _GetCNTR();
wCNTR |= CNTR_LPMODE;
_SetCNTR(wCNTR);
Enter_LowPowerMode();
}
/*******************************************************************************
* Function Name : Resume_Init
* Description : Handles wake-up restoring normal operations
* Input : None.
* Output : None.
* Return : USB_SUCCESS.
*******************************************************************************/
void Resume_Init(void)
{
uint16_t wCNTR;
/* ------------------ ONLY WITH BUS-POWERED DEVICES ---------------------- */
/* restart the clocks */
/* ... */
/* CNTR_LPMODE = 0 */
wCNTR = _GetCNTR();
wCNTR &= (~CNTR_LPMODE);
_SetCNTR(wCNTR);
/* restore full power */
/* ... on connected devices */
Leave_LowPowerMode();
/* reset FSUSP bit */
_SetCNTR(IMR_MSK);
/* reverse suspend preparation */
/* ... */
}
/*******************************************************************************
* Function Name : Resume
* Description : This is the state machine handling resume operations and
* timing sequence. The control is based on the Resume structure
* variables and on the ESOF interrupt calling this subroutine
* without changing machine state.
* Input : a state machine value (RESUME_STATE)
* RESUME_ESOF doesn't change ResumeS.eState allowing
* decrementing of the ESOF counter in different states.
* Output : None.
* Return : None.
*******************************************************************************/
void Resume(RESUME_STATE eResumeSetVal)
{
uint16_t wCNTR;
if (eResumeSetVal != RESUME_ESOF)
ResumeS.eState = eResumeSetVal;
switch (ResumeS.eState)
{
case RESUME_EXTERNAL:
if (remotewakeupon ==0)
{
Resume_Init();
ResumeS.eState = RESUME_OFF;
}
else /* RESUME detected during the RemoteWAkeup signalling => keep RemoteWakeup handling*/
{
ResumeS.eState = RESUME_ON;
}
break;
case RESUME_INTERNAL:
Resume_Init();
ResumeS.eState = RESUME_START;
remotewakeupon = 1;
break;
case RESUME_LATER:
ResumeS.bESOFcnt = 2;
ResumeS.eState = RESUME_WAIT;
break;
case RESUME_WAIT:
ResumeS.bESOFcnt--;
if (ResumeS.bESOFcnt == 0)
ResumeS.eState = RESUME_START;
break;
case RESUME_START:
wCNTR = _GetCNTR();
wCNTR |= CNTR_RESUME;
_SetCNTR(wCNTR);
ResumeS.eState = RESUME_ON;
ResumeS.bESOFcnt = 10;
break;
case RESUME_ON:
ResumeS.bESOFcnt--;
if (ResumeS.bESOFcnt == 0)
{
wCNTR = _GetCNTR();
wCNTR &= (~CNTR_RESUME);
_SetCNTR(wCNTR);
ResumeS.eState = RESUME_OFF;
remotewakeupon = 0;
}
break;
case RESUME_OFF:
case RESUME_ESOF:
default:
ResumeS.eState = RESUME_OFF;
break;
}
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

72
FW/Core/001-base_rt/USB/CONFIG/usb_pwr.h Normal file
View File

@ -0,0 +1,72 @@
/**
******************************************************************************
* @file usb_pwr.h
* @author MCD Application Team
* @version V4.0.0
* @date 21-January-2013
* @brief Connection/disconnection & power management header
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_PWR_H
#define __USB_PWR_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
typedef enum _RESUME_STATE
{
RESUME_EXTERNAL,
RESUME_INTERNAL,
RESUME_LATER,
RESUME_WAIT,
RESUME_START,
RESUME_ON,
RESUME_OFF,
RESUME_ESOF
} RESUME_STATE;
typedef enum _DEVICE_STATE
{
UNCONNECTED,
ATTACHED,
POWERED,
SUSPENDED,
ADDRESSED,
CONFIGURED
} DEVICE_STATE;
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void Suspend(void);
void Resume_Init(void);
void Resume(RESUME_STATE eResumeSetVal);
RESULT PowerOn(void);
RESULT PowerOff(void);
/* External variables --------------------------------------------------------*/
extern __IO uint32_t bDeviceState; /* USB device status */
extern __IO bool fSuspendEnabled; /* true when suspend is possible */
#endif /*__USB_PWR_H*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

23
FW/Core/001-base_rt/USB/SConscript Normal file
View File

@ -0,0 +1,23 @@
from building import *
import os
cwd = GetCurrentDir()
src = Glob('*.c')
src += Glob('*.cpp')
src += Glob('CONFIG/*.c')
src += Glob('air32_USB-FS-Device_Driver/src/*.c')
CPPPATH = [ cwd ]
CPPPATH += [cwd + "/CONFIG" ]
CPPPATH += [cwd + "/air32_USB-FS-Device_Driver/inc" ]
group = DefineGroup('USB', src, depend = [''], CPPPATH = CPPPATH)
list = os.listdir(cwd)
for item in list:
if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
group = group + SConscript(os.path.join(item, 'SConscript'))
Return('group')

259
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/inc/usb_core.h Normal file
View File

@ -0,0 +1,259 @@
/**
******************************************************************************
* @file usb_core.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Standard protocol processing functions prototypes
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_CORE_H
#define __USB_CORE_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
typedef enum _CONTROL_STATE
{
WAIT_SETUP, /* 0 */
SETTING_UP, /* 1 */
IN_DATA, /* 2 */
OUT_DATA, /* 3 */
LAST_IN_DATA, /* 4 */
LAST_OUT_DATA, /* 5 */
WAIT_STATUS_IN, /* 7 */
WAIT_STATUS_OUT, /* 8 */
STALLED, /* 9 */
PAUSE /* 10 */
} CONTROL_STATE; /* The state machine states of a control pipe */
typedef struct OneDescriptor
{
uint8_t *Descriptor;
uint16_t Descriptor_Size;
}
ONE_DESCRIPTOR, *PONE_DESCRIPTOR;
/* All the request process routines return a value of this type
If the return value is not SUCCESS or NOT_READY,
the software will STALL the correspond endpoint */
typedef enum _RESULT
{
USB_SUCCESS = 0, /* Process successfully */
USB_ERROR,
USB_UNSUPPORT,
USB_NOT_READY /* The process has not been finished, endpoint will be
NAK to further request */
} RESULT;
/*-*-*-*-*-*-*-*-*-*-* Definitions for endpoint level -*-*-*-*-*-*-*-*-*-*-*-*/
typedef struct _ENDPOINT_INFO
{
/* When send data out of the device,
CopyData() is used to get data buffer 'Length' bytes data
if Length is 0,
CopyData() returns the total length of the data
if the request is not supported, returns 0
(NEW Feature )
if CopyData() returns -1, the calling routine should not proceed
further and will resume the SETUP process by the class device
if Length is not 0,
CopyData() returns a pointer to indicate the data location
Usb_wLength is the data remain to be sent,
Usb_wOffset is the Offset of original data
When receive data from the host,
CopyData() is used to get user data buffer which is capable
of Length bytes data to copy data from the endpoint buffer.
if Length is 0,
CopyData() returns the available data length,
if Length is not 0,
CopyData() returns user buffer address
Usb_rLength is the data remain to be received,
Usb_rPointer is the Offset of data buffer
*/
uint16_t Usb_wLength;
uint16_t Usb_wOffset;
uint16_t PacketSize;
uint8_t *(*CopyData)(uint16_t Length);
} ENDPOINT_INFO;
/*-*-*-*-*-*-*-*-*-*-*-* Definitions for device level -*-*-*-*-*-*-*-*-*-*-*-*/
typedef struct _DEVICE
{
uint8_t Total_Endpoint; /* Number of endpoints that are used */
uint8_t Total_Configuration;/* Number of configuration available */
}
DEVICE;
typedef union
{
uint16_t w;
struct BW
{
uint8_t bb1;
uint8_t bb0;
}
bw;
} uint16_t_uint8_t;
typedef struct _DEVICE_INFO
{
uint8_t USBbmRequestType; /* bmRequestType */
uint8_t USBbRequest; /* bRequest */
uint16_t_uint8_t USBwValues; /* wValue */
uint16_t_uint8_t USBwIndexs; /* wIndex */
uint16_t_uint8_t USBwLengths; /* wLength */
uint8_t ControlState; /* of type CONTROL_STATE */
uint8_t Current_Feature;
uint8_t Current_Configuration; /* Selected configuration */
uint8_t Current_Interface; /* Selected interface of current configuration */
uint8_t Current_AlternateSetting;/* Selected Alternate Setting of current
interface*/
ENDPOINT_INFO Ctrl_Info;
} DEVICE_INFO;
typedef struct _DEVICE_PROP
{
void (*Init)(void); /* Initialize the device */
void (*Reset)(void); /* Reset routine of this device */
/* Device dependent process after the status stage */
void (*Process_Status_IN)(void);
void (*Process_Status_OUT)(void);
/* Procedure of process on setup stage of a class specified request with data stage */
/* All class specified requests with data stage are processed in Class_Data_Setup
Class_Data_Setup()
responses to check all special requests and fills ENDPOINT_INFO
according to the request
If IN tokens are expected, then wLength & wOffset will be filled
with the total transferring bytes and the starting position
If OUT tokens are expected, then rLength & rOffset will be filled
with the total expected bytes and the starting position in the buffer
If the request is valid, Class_Data_Setup returns SUCCESS, else UNSUPPORT
CAUTION:
Since GET_CONFIGURATION & GET_INTERFACE are highly related to
the individual classes, they will be checked and processed here.
*/
RESULT (*Class_Data_Setup)(uint8_t RequestNo);
/* Procedure of process on setup stage of a class specified request without data stage */
/* All class specified requests without data stage are processed in Class_NoData_Setup
Class_NoData_Setup
responses to check all special requests and perform the request
CAUTION:
Since SET_CONFIGURATION & SET_INTERFACE are highly related to
the individual classes, they will be checked and processed here.
*/
RESULT (*Class_NoData_Setup)(uint8_t RequestNo);
/*Class_Get_Interface_Setting
This function is used by the file usb_core.c to test if the selected Interface
and Alternate Setting (uint8_t Interface, uint8_t AlternateSetting) are supported by
the application.
This function is writing by user. It should return "SUCCESS" if the Interface
and Alternate Setting are supported by the application or "UNSUPPORT" if they
are not supported. */
RESULT (*Class_Get_Interface_Setting)(uint8_t Interface, uint8_t AlternateSetting);
uint8_t* (*GetDeviceDescriptor)(uint16_t Length);
uint8_t* (*GetConfigDescriptor)(uint16_t Length);
uint8_t* (*GetStringDescriptor)(uint16_t Length);
/* This field is not used in current library version. It is kept only for
compatibility with previous versions */
void* RxEP_buffer;
uint8_t MaxPacketSize;
} DEVICE_PROP;
typedef struct _USER_STANDARD_REQUESTS
{
void (*User_GetConfiguration)(void); /* Get Configuration */
void (*User_SetConfiguration)(void); /* Set Configuration */
void (*User_GetInterface)(void); /* Get Interface */
void (*User_SetInterface)(void); /* Set Interface */
void (*User_GetStatus)(void); /* Get Status */
void (*User_ClearFeature)(void); /* Clear Feature */
void (*User_SetEndPointFeature)(void); /* Set Endpoint Feature */
void (*User_SetDeviceFeature)(void); /* Set Device Feature */
void (*User_SetDeviceAddress)(void); /* Set Device Address */
}
USER_STANDARD_REQUESTS;
/* Exported constants --------------------------------------------------------*/
#define Type_Recipient (pInformation->USBbmRequestType & (REQUEST_TYPE | RECIPIENT))
#define Usb_rLength Usb_wLength
#define Usb_rOffset Usb_wOffset
#define USBwValue USBwValues.w
#define USBwValue0 USBwValues.bw.bb0
#define USBwValue1 USBwValues.bw.bb1
#define USBwIndex USBwIndexs.w
#define USBwIndex0 USBwIndexs.bw.bb0
#define USBwIndex1 USBwIndexs.bw.bb1
#define USBwLength USBwLengths.w
#define USBwLength0 USBwLengths.bw.bb0
#define USBwLength1 USBwLengths.bw.bb1
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
uint8_t Setup0_Process(void);
uint8_t Post0_Process(void);
uint8_t Out0_Process(void);
uint8_t In0_Process(void);
RESULT Standard_SetEndPointFeature(void);
RESULT Standard_SetDeviceFeature(void);
uint8_t *Standard_GetConfiguration(uint16_t Length);
RESULT Standard_SetConfiguration(void);
uint8_t *Standard_GetInterface(uint16_t Length);
RESULT Standard_SetInterface(void);
uint8_t *Standard_GetDescriptorData(uint16_t Length, PONE_DESCRIPTOR pDesc);
uint8_t *Standard_GetStatus(uint16_t Length);
RESULT Standard_ClearFeature(void);
void SetDeviceAddress(uint8_t);
void NOP_Process(void);
extern DEVICE_PROP Device_Property;
extern USER_STANDARD_REQUESTS User_Standard_Requests;
extern DEVICE Device_Table;
extern DEVICE_INFO Device_Info;
/* cells saving status during interrupt servicing */
extern __IO uint16_t SaveRState;
extern __IO uint16_t SaveTState;
#endif /* __USB_CORE_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

92
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/inc/usb_def.h Normal file
View File

@ -0,0 +1,92 @@
/**
******************************************************************************
* @file usb_def.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Definitions related to USB Core
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_DEF_H
#define __USB_DEF_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
typedef enum _RECIPIENT_TYPE
{
DEVICE_RECIPIENT, /* Recipient device */
INTERFACE_RECIPIENT, /* Recipient interface */
ENDPOINT_RECIPIENT, /* Recipient endpoint */
OTHER_RECIPIENT
} RECIPIENT_TYPE;
typedef enum _STANDARD_REQUESTS
{
GET_STATUS = 0,
CLEAR_FEATURE,
RESERVED1,
SET_FEATURE,
RESERVED2,
SET_ADDRESS,
GET_DESCRIPTOR,
SET_DESCRIPTOR,
GET_CONFIGURATION,
SET_CONFIGURATION,
GET_INTERFACE,
SET_INTERFACE,
TOTAL_sREQUEST, /* Total number of Standard request */
SYNCH_FRAME = 12
} STANDARD_REQUESTS;
/* Definition of "USBwValue" */
typedef enum _DESCRIPTOR_TYPE
{
DEVICE_DESCRIPTOR = 1,
CONFIG_DESCRIPTOR,
STRING_DESCRIPTOR,
INTERFACE_DESCRIPTOR,
ENDPOINT_DESCRIPTOR
} DESCRIPTOR_TYPE;
/* Feature selector of a SET_FEATURE or CLEAR_FEATURE */
typedef enum _FEATURE_SELECTOR
{
ENDPOINT_STALL,
DEVICE_REMOTE_WAKEUP
} FEATURE_SELECTOR;
/* Exported constants --------------------------------------------------------*/
/* Definition of "USBbmRequestType" */
#define REQUEST_TYPE 0x60 /* Mask to get request type */
#define STANDARD_REQUEST 0x00 /* Standard request */
#define CLASS_REQUEST 0x20 /* Class request */
#define VENDOR_REQUEST 0x40 /* Vendor request */
#define RECIPIENT 0x1F /* Mask to get recipient */
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
#endif /* __USB_DEF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

62
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/inc/usb_init.h Normal file
View File

@ -0,0 +1,62 @@
/**
******************************************************************************
* @file usb_init.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Initialization routines & global variables
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_INIT_H
#define __USB_INIT_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void USB_Init(void);
/* External variables --------------------------------------------------------*/
/* The number of current endpoint, it will be used to specify an endpoint */
extern uint8_t EPindex;
/* The number of current device, it is an index to the Device_Table */
/*extern uint8_t Device_no; */
/* Points to the DEVICE_INFO structure of current device */
/* The purpose of this register is to speed up the execution */
extern DEVICE_INFO* pInformation;
/* Points to the DEVICE_PROP structure of current device */
/* The purpose of this register is to speed up the execution */
extern DEVICE_PROP* pProperty;
/* Temporary save the state of Rx & Tx status. */
/* Whenever the Rx or Tx state is changed, its value is saved */
/* in this variable first and will be set to the EPRB or EPRA */
/* at the end of interrupt process */
extern USER_STANDARD_REQUESTS *pUser_Standard_Requests;
extern uint16_t SaveState ;
extern uint16_t wInterrupt_Mask;
#endif /* __USB_INIT_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

45
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/inc/usb_int.h Normal file
View File

@ -0,0 +1,45 @@
/**
******************************************************************************
* @file usb_int.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Endpoint CTR (Low and High) interrupt's service routines prototypes
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_INT_H
#define __USB_INT_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void CTR_LP(void);
void CTR_HP(void);
/* External variables --------------------------------------------------------*/
#endif /* __USB_INT_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

52
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/inc/usb_lib.h Normal file
View File

@ -0,0 +1,52 @@
/**
******************************************************************************
* @file usb_lib.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief USB library include files
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_LIB_H
#define __USB_LIB_H
/* Includes ------------------------------------------------------------------*/
#include "hw_config.h"
#include "usb_type.h"
#include "usb_regs.h"
#include "usb_def.h"
#include "usb_core.h"
#include "usb_init.h"
#include "usb_sil.h"
#include "usb_mem.h"
#include "usb_int.h"
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* External variables --------------------------------------------------------*/
#endif /* __USB_LIB_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

45
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/inc/usb_mem.h Normal file
View File

@ -0,0 +1,45 @@
/**
******************************************************************************
* @file usb_mem.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Utility prototypes functions for memory/PMA transfers
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_MEM_H
#define __USB_MEM_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void UserToPMABufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
void PMAToUserBufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
/* External variables --------------------------------------------------------*/
#endif /*__USB_MEM_H*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

683
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/inc/usb_regs.h Normal file
View File

@ -0,0 +1,683 @@
/**
******************************************************************************
* @file usb_regs.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Interface prototype functions to USB cell registers
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_REGS_H
#define __USB_REGS_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
typedef enum _EP_DBUF_DIR
{
/* double buffered endpoint direction */
EP_DBUF_ERR,
EP_DBUF_OUT,
EP_DBUF_IN
} EP_DBUF_DIR;
/* endpoint buffer number */
enum EP_BUF_NUM
{
EP_NOBUF,
EP_BUF0,
EP_BUF1
};
/* Exported constants --------------------------------------------------------*/
#define RegBase (0x40005C00L) /* USB_IP Peripheral Registers base address */
#define PMAAddr (0x40006000L) /* USB_IP Packet Memory Area base address */
/******************************************************************************/
/* General registers */
/******************************************************************************/
/* Control register */
#define CNTR ((__IO unsigned *)(RegBase + 0x40))
/* Interrupt status register */
#define ISTR ((__IO unsigned *)(RegBase + 0x44))
/* Frame number register */
#define FNR ((__IO unsigned *)(RegBase + 0x48))
/* Device address register */
#define DADDR ((__IO unsigned *)(RegBase + 0x4C))
/* Buffer Table address register */
#define BTABLE ((__IO unsigned *)(RegBase + 0x50))
#define DP_PUUP *((__IO unsigned *)(RegBase + 0x54))
/******************************************************************************/
/* Endpoint registers */
/******************************************************************************/
#define EP0REG ((__IO unsigned *)(RegBase)) /* endpoint 0 register address */
/* Endpoint Addresses (w/direction) */
#define EP0_OUT ((uint8_t)0x00)
#define EP0_IN ((uint8_t)0x80)
#define EP1_OUT ((uint8_t)0x01)
#define EP1_IN ((uint8_t)0x81)
#define EP2_OUT ((uint8_t)0x02)
#define EP2_IN ((uint8_t)0x82)
#define EP3_OUT ((uint8_t)0x03)
#define EP3_IN ((uint8_t)0x83)
#define EP4_OUT ((uint8_t)0x04)
#define EP4_IN ((uint8_t)0x84)
#define EP5_OUT ((uint8_t)0x05)
#define EP5_IN ((uint8_t)0x85)
#define EP6_OUT ((uint8_t)0x06)
#define EP6_IN ((uint8_t)0x86)
#define EP7_OUT ((uint8_t)0x07)
#define EP7_IN ((uint8_t)0x87)
/* endpoints enumeration */
#define ENDP0 ((uint8_t)0)
#define ENDP1 ((uint8_t)1)
#define ENDP2 ((uint8_t)2)
#define ENDP3 ((uint8_t)3)
#define ENDP4 ((uint8_t)4)
#define ENDP5 ((uint8_t)5)
#define ENDP6 ((uint8_t)6)
#define ENDP7 ((uint8_t)7)
/******************************************************************************/
/* ISTR interrupt events */
/******************************************************************************/
#define ISTR_CTR (0x8000) /* Correct TRansfer (clear-only bit) */
#define ISTR_DOVR (0x4000) /* DMA OVeR/underrun (clear-only bit) */
#define ISTR_ERR (0x2000) /* ERRor (clear-only bit) */
#define ISTR_WKUP (0x1000) /* WaKe UP (clear-only bit) */
#define ISTR_SUSP (0x0800) /* SUSPend (clear-only bit) */
#define ISTR_RESET (0x0400) /* RESET (clear-only bit) */
#define ISTR_SOF (0x0200) /* Start Of Frame (clear-only bit) */
#define ISTR_ESOF (0x0100) /* Expected Start Of Frame (clear-only bit) */
#define ISTR_DIR (0x0010) /* DIRection of transaction (read-only bit) */
#define ISTR_EP_ID (0x000F) /* EndPoint IDentifier (read-only bit) */
#define CLR_CTR (~ISTR_CTR) /* clear Correct TRansfer bit */
#define CLR_DOVR (~ISTR_DOVR) /* clear DMA OVeR/underrun bit*/
#define CLR_ERR (~ISTR_ERR) /* clear ERRor bit */
#define CLR_WKUP (~ISTR_WKUP) /* clear WaKe UP bit */
#define CLR_SUSP (~ISTR_SUSP) /* clear SUSPend bit */
#define CLR_RESET (~ISTR_RESET) /* clear RESET bit */
#define CLR_SOF (~ISTR_SOF) /* clear Start Of Frame bit */
#define CLR_ESOF (~ISTR_ESOF) /* clear Expected Start Of Frame bit */
/******************************************************************************/
/* CNTR control register bits definitions */
/******************************************************************************/
#define CNTR_CTRM (0x8000) /* Correct TRansfer Mask */
#define CNTR_DOVRM (0x4000) /* DMA OVeR/underrun Mask */
#define CNTR_ERRM (0x2000) /* ERRor Mask */
#define CNTR_WKUPM (0x1000) /* WaKe UP Mask */
#define CNTR_SUSPM (0x0800) /* SUSPend Mask */
#define CNTR_RESETM (0x0400) /* RESET Mask */
#define CNTR_SOFM (0x0200) /* Start Of Frame Mask */
#define CNTR_ESOFM (0x0100) /* Expected Start Of Frame Mask */
#define CNTR_RESUME (0x0010) /* RESUME request */
#define CNTR_FSUSP (0x0008) /* Force SUSPend */
#define CNTR_LPMODE (0x0004) /* Low-power MODE */
#define CNTR_PDWN (0x0002) /* Power DoWN */
#define CNTR_FRES (0x0001) /* Force USB RESet */
/******************************************************************************/
/* FNR Frame Number Register bit definitions */
/******************************************************************************/
#define FNR_RXDP (0x8000) /* status of D+ data line */
#define FNR_RXDM (0x4000) /* status of D- data line */
#define FNR_LCK (0x2000) /* LoCKed */
#define FNR_LSOF (0x1800) /* Lost SOF */
#define FNR_FN (0x07FF) /* Frame Number */
/******************************************************************************/
/* DADDR Device ADDRess bit definitions */
/******************************************************************************/
#define DADDR_EF (0x80)
#define DADDR_ADD (0x7F)
/******************************************************************************/
/* Endpoint register */
/******************************************************************************/
/* bit positions */
#define EP_CTR_RX (0x8000) /* EndPoint Correct TRansfer RX */
#define EP_DTOG_RX (0x4000) /* EndPoint Data TOGGLE RX */
#define EPRX_STAT (0x3000) /* EndPoint RX STATus bit field */
#define EP_SETUP (0x0800) /* EndPoint SETUP */
#define EP_T_FIELD (0x0600) /* EndPoint TYPE */
#define EP_KIND (0x0100) /* EndPoint KIND */
#define EP_CTR_TX (0x0080) /* EndPoint Correct TRansfer TX */
#define EP_DTOG_TX (0x0040) /* EndPoint Data TOGGLE TX */
#define EPTX_STAT (0x0030) /* EndPoint TX STATus bit field */
#define EPADDR_FIELD (0x000F) /* EndPoint ADDRess FIELD */
/* EndPoint REGister MASK (no toggle fields) */
#define EPREG_MASK (EP_CTR_RX|EP_SETUP|EP_T_FIELD|EP_KIND|EP_CTR_TX|EPADDR_FIELD)
/* EP_TYPE[1:0] EndPoint TYPE */
#define EP_TYPE_MASK (0x0600) /* EndPoint TYPE Mask */
#define EP_BULK (0x0000) /* EndPoint BULK */
#define EP_CONTROL (0x0200) /* EndPoint CONTROL */
#define EP_ISOCHRONOUS (0x0400) /* EndPoint ISOCHRONOUS */
#define EP_INTERRUPT (0x0600) /* EndPoint INTERRUPT */
#define EP_T_MASK (~EP_T_FIELD & EPREG_MASK)
/* EP_KIND EndPoint KIND */
#define EPKIND_MASK (~EP_KIND & EPREG_MASK)
/* STAT_TX[1:0] STATus for TX transfer */
#define EP_TX_DIS (0x0000) /* EndPoint TX DISabled */
#define EP_TX_STALL (0x0010) /* EndPoint TX STALLed */
#define EP_TX_NAK (0x0020) /* EndPoint TX NAKed */
#define EP_TX_VALID (0x0030) /* EndPoint TX VALID */
#define EPTX_DTOG1 (0x0010) /* EndPoint TX Data TOGgle bit1 */
#define EPTX_DTOG2 (0x0020) /* EndPoint TX Data TOGgle bit2 */
#define EPTX_DTOGMASK (EPTX_STAT|EPREG_MASK)
/* STAT_RX[1:0] STATus for RX transfer */
#define EP_RX_DIS (0x0000) /* EndPoint RX DISabled */
#define EP_RX_STALL (0x1000) /* EndPoint RX STALLed */
#define EP_RX_NAK (0x2000) /* EndPoint RX NAKed */
#define EP_RX_VALID (0x3000) /* EndPoint RX VALID */
#define EPRX_DTOG1 (0x1000) /* EndPoint RX Data TOGgle bit1 */
#define EPRX_DTOG2 (0x2000) /* EndPoint RX Data TOGgle bit1 */
#define EPRX_DTOGMASK (EPRX_STAT|EPREG_MASK)
/* Exported macro ------------------------------------------------------------*/
/* SetCNTR */
#define _SetCNTR(wRegValue) (*CNTR = (uint16_t)wRegValue)
/* SetISTR */
#define _SetISTR(wRegValue) (*ISTR = (uint16_t)wRegValue)
/* SetDADDR */
#define _SetDADDR(wRegValue) (*DADDR = (uint16_t)wRegValue)
/* SetBTABLE */
#define _SetBTABLE(wRegValue)(*BTABLE = (uint16_t)(wRegValue & 0xFFF8))
/* GetCNTR */
#define _GetCNTR() ((uint16_t) *CNTR)
/* GetISTR */
#define _GetISTR() ((uint16_t) *ISTR)
/* GetFNR */
#define _GetFNR() ((uint16_t) *FNR)
/* GetDADDR */
#define _GetDADDR() ((uint16_t) *DADDR)
/* GetBTABLE */
#define _GetBTABLE() ((uint16_t) *BTABLE)
/* SetENDPOINT */
#define _SetENDPOINT(bEpNum,wRegValue) (*(EP0REG + bEpNum)= \
(uint16_t)wRegValue)
/* GetENDPOINT */
#define _GetENDPOINT(bEpNum) ((uint16_t)(*(EP0REG + bEpNum)))
/*******************************************************************************
* Macro Name : SetEPType
* Description : sets the type in the endpoint register(bits EP_TYPE[1:0])
* Input : bEpNum: Endpoint Number.
* wType
* Output : None.
* Return : None.
*******************************************************************************/
#define _SetEPType(bEpNum,wType) (_SetENDPOINT(bEpNum,\
((_GetENDPOINT(bEpNum) & EP_T_MASK) | wType )))
/*******************************************************************************
* Macro Name : GetEPType
* Description : gets the type in the endpoint register(bits EP_TYPE[1:0])
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Endpoint Type
*******************************************************************************/
#define _GetEPType(bEpNum) (_GetENDPOINT(bEpNum) & EP_T_FIELD)
/*******************************************************************************
* Macro Name : SetEPTxStatus
* Description : sets the status for tx transfer (bits STAT_TX[1:0]).
* Input : bEpNum: Endpoint Number.
* wState: new state
* Output : None.
* Return : None.
*******************************************************************************/
#define _SetEPTxStatus(bEpNum,wState) {\
register uint16_t _wRegVal; \
_wRegVal = _GetENDPOINT(bEpNum) & EPTX_DTOGMASK;\
/* toggle first bit ? */ \
if((EPTX_DTOG1 & wState)!= 0) \
_wRegVal ^= EPTX_DTOG1; \
/* toggle second bit ? */ \
if((EPTX_DTOG2 & wState)!= 0) \
_wRegVal ^= EPTX_DTOG2; \
_SetENDPOINT(bEpNum, (_wRegVal | EP_CTR_RX|EP_CTR_TX)); \
} /* _SetEPTxStatus */
/*******************************************************************************
* Macro Name : SetEPRxStatus
* Description : sets the status for rx transfer (bits STAT_TX[1:0])
* Input : bEpNum: Endpoint Number.
* wState: new state.
* Output : None.
* Return : None.
*******************************************************************************/
#define _SetEPRxStatus(bEpNum,wState) {\
register uint16_t _wRegVal; \
\
_wRegVal = _GetENDPOINT(bEpNum) & EPRX_DTOGMASK;\
/* toggle first bit ? */ \
if((EPRX_DTOG1 & wState)!= 0) \
_wRegVal ^= EPRX_DTOG1; \
/* toggle second bit ? */ \
if((EPRX_DTOG2 & wState)!= 0) \
_wRegVal ^= EPRX_DTOG2; \
_SetENDPOINT(bEpNum, (_wRegVal | EP_CTR_RX|EP_CTR_TX)); \
} /* _SetEPRxStatus */
/*******************************************************************************
* Macro Name : SetEPRxTxStatus
* Description : sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
* Input : bEpNum: Endpoint Number.
* wStaterx: new state.
* wStatetx: new state.
* Output : None.
* Return : None.
*******************************************************************************/
#define _SetEPRxTxStatus(bEpNum,wStaterx,wStatetx) {\
register uint32_t _wRegVal; \
\
_wRegVal = _GetENDPOINT(bEpNum) & (EPRX_DTOGMASK |EPTX_STAT) ;\
/* toggle first bit ? */ \
if((EPRX_DTOG1 & wStaterx)!= 0) \
_wRegVal ^= EPRX_DTOG1; \
/* toggle second bit ? */ \
if((EPRX_DTOG2 & wStaterx)!= 0) \
_wRegVal ^= EPRX_DTOG2; \
/* toggle first bit ? */ \
if((EPTX_DTOG1 & wStatetx)!= 0) \
_wRegVal ^= EPTX_DTOG1; \
/* toggle second bit ? */ \
if((EPTX_DTOG2 & wStatetx)!= 0) \
_wRegVal ^= EPTX_DTOG2; \
_SetENDPOINT(bEpNum, _wRegVal | EP_CTR_RX|EP_CTR_TX); \
} /* _SetEPRxTxStatus */
/*******************************************************************************
* Macro Name : GetEPTxStatus / GetEPRxStatus
* Description : gets the status for tx/rx transfer (bits STAT_TX[1:0]
* /STAT_RX[1:0])
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : status .
*******************************************************************************/
#define _GetEPTxStatus(bEpNum) ((uint16_t)_GetENDPOINT(bEpNum) & EPTX_STAT)
#define _GetEPRxStatus(bEpNum) ((uint16_t)_GetENDPOINT(bEpNum) & EPRX_STAT)
/*******************************************************************************
* Macro Name : SetEPTxValid / SetEPRxValid
* Description : sets directly the VALID tx/rx-status into the enpoint register
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
#define _SetEPTxValid(bEpNum) (_SetEPTxStatus(bEpNum, EP_TX_VALID))
#define _SetEPRxValid(bEpNum) (_SetEPRxStatus(bEpNum, EP_RX_VALID))
/*******************************************************************************
* Macro Name : GetTxStallStatus / GetRxStallStatus.
* Description : checks stall condition in an endpoint.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : TRUE = endpoint in stall condition.
*******************************************************************************/
#define _GetTxStallStatus(bEpNum) (_GetEPTxStatus(bEpNum) \
== EP_TX_STALL)
#define _GetRxStallStatus(bEpNum) (_GetEPRxStatus(bEpNum) \
== EP_RX_STALL)
/*******************************************************************************
* Macro Name : SetEP_KIND / ClearEP_KIND.
* Description : set & clear EP_KIND bit.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
#define _SetEP_KIND(bEpNum) (_SetENDPOINT(bEpNum, \
(EP_CTR_RX|EP_CTR_TX|((_GetENDPOINT(bEpNum) | EP_KIND) & EPREG_MASK))))
#define _ClearEP_KIND(bEpNum) (_SetENDPOINT(bEpNum, \
(EP_CTR_RX|EP_CTR_TX|(_GetENDPOINT(bEpNum) & EPKIND_MASK))))
/*******************************************************************************
* Macro Name : Set_Status_Out / Clear_Status_Out.
* Description : Sets/clears directly STATUS_OUT bit in the endpoint register.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
#define _Set_Status_Out(bEpNum) _SetEP_KIND(bEpNum)
#define _Clear_Status_Out(bEpNum) _ClearEP_KIND(bEpNum)
/*******************************************************************************
* Macro Name : SetEPDoubleBuff / ClearEPDoubleBuff.
* Description : Sets/clears directly EP_KIND bit in the endpoint register.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
#define _SetEPDoubleBuff(bEpNum) _SetEP_KIND(bEpNum)
#define _ClearEPDoubleBuff(bEpNum) _ClearEP_KIND(bEpNum)
/*******************************************************************************
* Macro Name : ClearEP_CTR_RX / ClearEP_CTR_TX.
* Description : Clears bit CTR_RX / CTR_TX in the endpoint register.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
#define _ClearEP_CTR_RX(bEpNum) (_SetENDPOINT(bEpNum,\
_GetENDPOINT(bEpNum) & 0x7FFF & EPREG_MASK))
#define _ClearEP_CTR_TX(bEpNum) (_SetENDPOINT(bEpNum,\
_GetENDPOINT(bEpNum) & 0xFF7F & EPREG_MASK))
/*******************************************************************************
* Macro Name : ToggleDTOG_RX / ToggleDTOG_TX .
* Description : Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
#define _ToggleDTOG_RX(bEpNum) (_SetENDPOINT(bEpNum, \
EP_CTR_RX|EP_CTR_TX|EP_DTOG_RX | (_GetENDPOINT(bEpNum) & EPREG_MASK)))
#define _ToggleDTOG_TX(bEpNum) (_SetENDPOINT(bEpNum, \
EP_CTR_RX|EP_CTR_TX|EP_DTOG_TX | (_GetENDPOINT(bEpNum) & EPREG_MASK)))
/*******************************************************************************
* Macro Name : ClearDTOG_RX / ClearDTOG_TX.
* Description : Clears DTOG_RX / DTOG_TX bit in the endpoint register.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
#define _ClearDTOG_RX(bEpNum) if((_GetENDPOINT(bEpNum) & EP_DTOG_RX) != 0)\
_ToggleDTOG_RX(bEpNum)
#define _ClearDTOG_TX(bEpNum) if((_GetENDPOINT(bEpNum) & EP_DTOG_TX) != 0)\
_ToggleDTOG_TX(bEpNum)
/*******************************************************************************
* Macro Name : SetEPAddress.
* Description : Sets address in an endpoint register.
* Input : bEpNum: Endpoint Number.
* bAddr: Address.
* Output : None.
* Return : None.
*******************************************************************************/
#define _SetEPAddress(bEpNum,bAddr) _SetENDPOINT(bEpNum,\
EP_CTR_RX|EP_CTR_TX|(_GetENDPOINT(bEpNum) & EPREG_MASK) | bAddr)
/*******************************************************************************
* Macro Name : GetEPAddress.
* Description : Gets address in an endpoint register.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
#define _GetEPAddress(bEpNum) ((uint8_t)(_GetENDPOINT(bEpNum) & EPADDR_FIELD))
#define _pEPTxAddr(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8 )*2 + PMAAddr))
#define _pEPTxCount(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8+2)*2 + PMAAddr))
#define _pEPRxAddr(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8+4)*2 + PMAAddr))
#define _pEPRxCount(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8+6)*2 + PMAAddr))
/*******************************************************************************
* Macro Name : SetEPTxAddr / SetEPRxAddr.
* Description : sets address of the tx/rx buffer.
* Input : bEpNum: Endpoint Number.
* wAddr: address to be set (must be word aligned).
* Output : None.
* Return : None.
*******************************************************************************/
#define _SetEPTxAddr(bEpNum,wAddr) (*_pEPTxAddr(bEpNum) = ((wAddr >> 1) << 1))
#define _SetEPRxAddr(bEpNum,wAddr) (*_pEPRxAddr(bEpNum) = ((wAddr >> 1) << 1))
/*******************************************************************************
* Macro Name : GetEPTxAddr / GetEPRxAddr.
* Description : Gets address of the tx/rx buffer.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : address of the buffer.
*******************************************************************************/
#define _GetEPTxAddr(bEpNum) ((uint16_t)*_pEPTxAddr(bEpNum))
#define _GetEPRxAddr(bEpNum) ((uint16_t)*_pEPRxAddr(bEpNum))
/*******************************************************************************
* Macro Name : SetEPCountRxReg.
* Description : Sets counter of rx buffer with no. of blocks.
* Input : pdwReg: pointer to counter.
* wCount: Counter.
* Output : None.
* Return : None.
*******************************************************************************/
#define _BlocksOf32(dwReg,wCount,wNBlocks) {\
wNBlocks = wCount >> 5;\
if((wCount & 0x1f) == 0)\
wNBlocks--;\
*pdwReg = (uint32_t)((wNBlocks << 10) | 0x8000);\
}/* _BlocksOf32 */
#define _BlocksOf2(dwReg,wCount,wNBlocks) {\
wNBlocks = wCount >> 1;\
if((wCount & 0x1) != 0)\
wNBlocks++;\
*pdwReg = (uint32_t)(wNBlocks << 10);\
}/* _BlocksOf2 */
#define _SetEPCountRxReg(dwReg,wCount) {\
uint16_t wNBlocks;\
if(wCount > 62){_BlocksOf32(dwReg,wCount,wNBlocks);}\
else {_BlocksOf2(dwReg,wCount,wNBlocks);}\
}/* _SetEPCountRxReg */
#define _SetEPRxDblBuf0Count(bEpNum,wCount) {\
uint32_t *pdwReg = _pEPTxCount(bEpNum); \
_SetEPCountRxReg(pdwReg, wCount);\
}
/*******************************************************************************
* Macro Name : SetEPTxCount / SetEPRxCount.
* Description : sets counter for the tx/rx buffer.
* Input : bEpNum: endpoint number.
* wCount: Counter value.
* Output : None.
* Return : None.
*******************************************************************************/
#define _SetEPTxCount(bEpNum,wCount) (*_pEPTxCount(bEpNum) = wCount)
#define _SetEPRxCount(bEpNum,wCount) {\
uint32_t *pdwReg = _pEPRxCount(bEpNum); \
_SetEPCountRxReg(pdwReg, wCount);\
}
/*******************************************************************************
* Macro Name : GetEPTxCount / GetEPRxCount.
* Description : gets counter of the tx buffer.
* Input : bEpNum: endpoint number.
* Output : None.
* Return : Counter value.
*******************************************************************************/
#define _GetEPTxCount(bEpNum)((uint16_t)(*_pEPTxCount(bEpNum)) & 0x3ff)
#define _GetEPRxCount(bEpNum)((uint16_t)(*_pEPRxCount(bEpNum)) & 0x3ff)
/*******************************************************************************
* Macro Name : SetEPDblBuf0Addr / SetEPDblBuf1Addr.
* Description : Sets buffer 0/1 address in a double buffer endpoint.
* Input : bEpNum: endpoint number.
* : wBuf0Addr: buffer 0 address.
* Output : None.
* Return : None.
*******************************************************************************/
#define _SetEPDblBuf0Addr(bEpNum,wBuf0Addr) {_SetEPTxAddr(bEpNum, wBuf0Addr);}
#define _SetEPDblBuf1Addr(bEpNum,wBuf1Addr) {_SetEPRxAddr(bEpNum, wBuf1Addr);}
/*******************************************************************************
* Macro Name : SetEPDblBuffAddr.
* Description : Sets addresses in a double buffer endpoint.
* Input : bEpNum: endpoint number.
* : wBuf0Addr: buffer 0 address.
* : wBuf1Addr = buffer 1 address.
* Output : None.
* Return : None.
*******************************************************************************/
#define _SetEPDblBuffAddr(bEpNum,wBuf0Addr,wBuf1Addr) { \
_SetEPDblBuf0Addr(bEpNum, wBuf0Addr);\
_SetEPDblBuf1Addr(bEpNum, wBuf1Addr);\
} /* _SetEPDblBuffAddr */
/*******************************************************************************
* Macro Name : GetEPDblBuf0Addr / GetEPDblBuf1Addr.
* Description : Gets buffer 0/1 address of a double buffer endpoint.
* Input : bEpNum: endpoint number.
* Output : None.
* Return : None.
*******************************************************************************/
#define _GetEPDblBuf0Addr(bEpNum) (_GetEPTxAddr(bEpNum))
#define _GetEPDblBuf1Addr(bEpNum) (_GetEPRxAddr(bEpNum))
/*******************************************************************************
* Macro Name : SetEPDblBuffCount / SetEPDblBuf0Count / SetEPDblBuf1Count.
* Description : Gets buffer 0/1 address of a double buffer endpoint.
* Input : bEpNum: endpoint number.
* : bDir: endpoint dir EP_DBUF_OUT = OUT
* EP_DBUF_IN = IN
* : wCount: Counter value
* Output : None.
* Return : None.
*******************************************************************************/
#define _SetEPDblBuf0Count(bEpNum, bDir, wCount) { \
if(bDir == EP_DBUF_OUT)\
/* OUT endpoint */ \
{_SetEPRxDblBuf0Count(bEpNum,wCount);} \
else if(bDir == EP_DBUF_IN)\
/* IN endpoint */ \
*_pEPTxCount(bEpNum) = (uint32_t)wCount; \
} /* SetEPDblBuf0Count*/
#define _SetEPDblBuf1Count(bEpNum, bDir, wCount) { \
if(bDir == EP_DBUF_OUT)\
/* OUT endpoint */ \
{_SetEPRxCount(bEpNum,wCount);}\
else if(bDir == EP_DBUF_IN)\
/* IN endpoint */\
*_pEPRxCount(bEpNum) = (uint32_t)wCount; \
} /* SetEPDblBuf1Count */
#define _SetEPDblBuffCount(bEpNum, bDir, wCount) {\
_SetEPDblBuf0Count(bEpNum, bDir, wCount); \
_SetEPDblBuf1Count(bEpNum, bDir, wCount); \
} /* _SetEPDblBuffCount */
/*******************************************************************************
* Macro Name : GetEPDblBuf0Count / GetEPDblBuf1Count.
* Description : Gets buffer 0/1 rx/tx counter for double buffering.
* Input : bEpNum: endpoint number.
* Output : None.
* Return : None.
*******************************************************************************/
#define _GetEPDblBuf0Count(bEpNum) (_GetEPTxCount(bEpNum))
#define _GetEPDblBuf1Count(bEpNum) (_GetEPRxCount(bEpNum))
/* External variables --------------------------------------------------------*/
extern __IO uint16_t wIstr; /* ISTR register last read value */
/* Exported functions ------------------------------------------------------- */
void SetCNTR(uint16_t /*wRegValue*/);
void SetISTR(uint16_t /*wRegValue*/);
void SetDADDR(uint16_t /*wRegValue*/);
void SetBTABLE(uint16_t /*wRegValue*/);
void SetBTABLE(uint16_t /*wRegValue*/);
uint16_t GetCNTR(void);
uint16_t GetISTR(void);
uint16_t GetFNR(void);
uint16_t GetDADDR(void);
uint16_t GetBTABLE(void);
void SetENDPOINT(uint8_t /*bEpNum*/, uint16_t /*wRegValue*/);
uint16_t GetENDPOINT(uint8_t /*bEpNum*/);
void SetEPType(uint8_t /*bEpNum*/, uint16_t /*wType*/);
uint16_t GetEPType(uint8_t /*bEpNum*/);
void SetEPTxStatus(uint8_t /*bEpNum*/, uint16_t /*wState*/);
void SetEPRxStatus(uint8_t /*bEpNum*/, uint16_t /*wState*/);
void SetDouBleBuffEPStall(uint8_t /*bEpNum*/, uint8_t bDir);
uint16_t GetEPTxStatus(uint8_t /*bEpNum*/);
uint16_t GetEPRxStatus(uint8_t /*bEpNum*/);
void SetEPTxValid(uint8_t /*bEpNum*/);
void SetEPRxValid(uint8_t /*bEpNum*/);
uint16_t GetTxStallStatus(uint8_t /*bEpNum*/);
uint16_t GetRxStallStatus(uint8_t /*bEpNum*/);
void SetEP_KIND(uint8_t /*bEpNum*/);
void ClearEP_KIND(uint8_t /*bEpNum*/);
void Set_Status_Out(uint8_t /*bEpNum*/);
void Clear_Status_Out(uint8_t /*bEpNum*/);
void SetEPDoubleBuff(uint8_t /*bEpNum*/);
void ClearEPDoubleBuff(uint8_t /*bEpNum*/);
void ClearEP_CTR_RX(uint8_t /*bEpNum*/);
void ClearEP_CTR_TX(uint8_t /*bEpNum*/);
void ToggleDTOG_RX(uint8_t /*bEpNum*/);
void ToggleDTOG_TX(uint8_t /*bEpNum*/);
void ClearDTOG_RX(uint8_t /*bEpNum*/);
void ClearDTOG_TX(uint8_t /*bEpNum*/);
void SetEPAddress(uint8_t /*bEpNum*/, uint8_t /*bAddr*/);
uint8_t GetEPAddress(uint8_t /*bEpNum*/);
void SetEPTxAddr(uint8_t /*bEpNum*/, uint16_t /*wAddr*/);
void SetEPRxAddr(uint8_t /*bEpNum*/, uint16_t /*wAddr*/);
uint16_t GetEPTxAddr(uint8_t /*bEpNum*/);
uint16_t GetEPRxAddr(uint8_t /*bEpNum*/);
void SetEPCountRxReg(uint32_t * /*pdwReg*/, uint16_t /*wCount*/);
void SetEPTxCount(uint8_t /*bEpNum*/, uint16_t /*wCount*/);
void SetEPRxCount(uint8_t /*bEpNum*/, uint16_t /*wCount*/);
uint16_t GetEPTxCount(uint8_t /*bEpNum*/);
uint16_t GetEPRxCount(uint8_t /*bEpNum*/);
void SetEPDblBuf0Addr(uint8_t /*bEpNum*/, uint16_t /*wBuf0Addr*/);
void SetEPDblBuf1Addr(uint8_t /*bEpNum*/, uint16_t /*wBuf1Addr*/);
void SetEPDblBuffAddr(uint8_t /*bEpNum*/, uint16_t /*wBuf0Addr*/, uint16_t /*wBuf1Addr*/);
uint16_t GetEPDblBuf0Addr(uint8_t /*bEpNum*/);
uint16_t GetEPDblBuf1Addr(uint8_t /*bEpNum*/);
void SetEPDblBuffCount(uint8_t /*bEpNum*/, uint8_t /*bDir*/, uint16_t /*wCount*/);
void SetEPDblBuf0Count(uint8_t /*bEpNum*/, uint8_t /*bDir*/, uint16_t /*wCount*/);
void SetEPDblBuf1Count(uint8_t /*bEpNum*/, uint8_t /*bDir*/, uint16_t /*wCount*/);
uint16_t GetEPDblBuf0Count(uint8_t /*bEpNum*/);
uint16_t GetEPDblBuf1Count(uint8_t /*bEpNum*/);
EP_DBUF_DIR GetEPDblBufDir(uint8_t /*bEpNum*/);
void FreeUserBuffer(uint8_t bEpNum/*bEpNum*/, uint8_t bDir);
uint16_t ToWord(uint8_t, uint8_t);
uint16_t ByteSwap(uint16_t);
#endif /* __USB_REGS_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

47
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/inc/usb_sil.h Normal file
View File

@ -0,0 +1,47 @@
/**
******************************************************************************
* @file usb_sil.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Simplified Interface Layer function prototypes.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_SIL_H
#define __USB_SIL_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
uint32_t USB_SIL_Init(void);
uint32_t USB_SIL_Write(uint8_t bEpAddr, uint8_t* pBufferPointer, uint32_t wBufferSize);
uint32_t USB_SIL_Read(uint8_t bEpAddr, uint8_t* pBufferPointer);
/* External variables --------------------------------------------------------*/
#endif /* __USB_SIL_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

54
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/inc/usb_type.h Normal file
View File

@ -0,0 +1,54 @@
/**
******************************************************************************
* @file usb_type.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Type definitions used by the USB Library
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_TYPE_H
#define __USB_TYPE_H
/* Includes ------------------------------------------------------------------*/
#include "usb_conf.h"
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
#ifndef NULL
#define NULL ((void *)0)
#endif
typedef enum
{
FALSE = 0, TRUE = !FALSE
}
bool;
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* External variables --------------------------------------------------------*/
#endif /* __USB_TYPE_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1033
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/src/usb_core.c Normal file
View File

File diff suppressed because it is too large Load Diff

76
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/src/usb_init.c Normal file
View File

@ -0,0 +1,76 @@
/**
******************************************************************************
* @file usb_init.c
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Initialization routines & global variables
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* The number of current endpoint, it will be used to specify an endpoint */
uint8_t EPindex;
/* The number of current device, it is an index to the Device_Table */
/* uint8_t Device_no; */
/* Points to the DEVICE_INFO structure of current device */
/* The purpose of this register is to speed up the execution */
DEVICE_INFO *pInformation;
/* Points to the DEVICE_PROP structure of current device */
/* The purpose of this register is to speed up the execution */
DEVICE_PROP *pProperty;
/* Temporary save the state of Rx & Tx status. */
/* Whenever the Rx or Tx state is changed, its value is saved */
/* in this variable first and will be set to the EPRB or EPRA */
/* at the end of interrupt process */
uint16_t SaveState ;
uint16_t wInterrupt_Mask;
DEVICE_INFO Device_Info;
USER_STANDARD_REQUESTS *pUser_Standard_Requests;
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : USB_Init
* Description : USB system initialization
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void USB_Init(void)
{
pInformation = &Device_Info;
pInformation->ControlState = 2;
pProperty = &Device_Property;
pUser_Standard_Requests = &User_Standard_Requests;
/* Initialize devices one by one */
pProperty->Init();
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

195
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/src/usb_int.c Normal file
View File

@ -0,0 +1,195 @@
/**
******************************************************************************
* @file usb_int.c
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Endpoint CTR (Low and High) interrupt's service routines
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
__IO uint16_t SaveRState;
__IO uint16_t SaveTState;
/* Extern variables ----------------------------------------------------------*/
extern void (*pEpInt_IN[7])(void); /* Handles IN interrupts */
extern void (*pEpInt_OUT[7])(void); /* Handles OUT interrupts */
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : CTR_LP.
* Description : Low priority Endpoint Correct Transfer interrupt's service
* routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void CTR_LP(void)
{
__IO uint16_t wEPVal = 0;
/* stay in loop while pending interrupts */
while (((wIstr = _GetISTR()) & ISTR_CTR) != 0)
{
/* extract highest priority endpoint number */
EPindex = (uint8_t)(wIstr & ISTR_EP_ID);
if (EPindex == 0)
{
/* Decode and service control endpoint interrupt */
/* calling related service routine */
/* (Setup0_Process, In0_Process, Out0_Process) */
/* save RX & TX status */
/* and set both to NAK */
SaveRState = _GetENDPOINT(ENDP0);
SaveTState = SaveRState & EPTX_STAT;
SaveRState &= EPRX_STAT;
_SetEPRxTxStatus(ENDP0,EP_RX_NAK,EP_TX_NAK);
/* DIR bit = origin of the interrupt */
if ((wIstr & ISTR_DIR) == 0)
{
/* DIR = 0 */
/* DIR = 0 => IN int */
/* DIR = 0 implies that (EP_CTR_TX = 1) always */
_ClearEP_CTR_TX(ENDP0);
In0_Process();
/* before terminate set Tx & Rx status */
_SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
return;
}
else
{
/* DIR = 1 */
/* DIR = 1 & CTR_RX => SETUP or OUT int */
/* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */
wEPVal = _GetENDPOINT(ENDP0);
if ((wEPVal &EP_SETUP) != 0)
{
_ClearEP_CTR_RX(ENDP0); /* SETUP bit kept frozen while CTR_RX = 1 */
Setup0_Process();
/* before terminate set Tx & Rx status */
_SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
return;
}
else if ((wEPVal & EP_CTR_RX) != 0)
{
_ClearEP_CTR_RX(ENDP0);
Out0_Process();
/* before terminate set Tx & Rx status */
_SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
return;
}
}
}/* if(EPindex == 0) */
else
{
/* Decode and service non control endpoints interrupt */
/* process related endpoint register */
wEPVal = _GetENDPOINT(EPindex);
if ((wEPVal & EP_CTR_RX) != 0)
{
/* clear int flag */
_ClearEP_CTR_RX(EPindex);
/* call OUT service function */
(*pEpInt_OUT[EPindex-1])();
} /* if((wEPVal & EP_CTR_RX) */
if ((wEPVal & EP_CTR_TX) != 0)
{
/* clear int flag */
_ClearEP_CTR_TX(EPindex);
/* call IN service function */
(*pEpInt_IN[EPindex-1])();
} /* if((wEPVal & EP_CTR_TX) != 0) */
}/* if(EPindex == 0) else */
}/* while(...) */
}
/*******************************************************************************
* Function Name : CTR_HP.
* Description : High Priority Endpoint Correct Transfer interrupt's service
* routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void CTR_HP(void)
{
uint32_t wEPVal = 0;
while (((wIstr = _GetISTR()) & ISTR_CTR) != 0)
{
_SetISTR((uint16_t)CLR_CTR); /* clear CTR flag */
/* extract highest priority endpoint number */
EPindex = (uint8_t)(wIstr & ISTR_EP_ID);
/* process related endpoint register */
wEPVal = _GetENDPOINT(EPindex);
if ((wEPVal & EP_CTR_RX) != 0)
{
/* clear int flag */
_ClearEP_CTR_RX(EPindex);
/* call OUT service function */
(*pEpInt_OUT[EPindex-1])();
} /* if((wEPVal & EP_CTR_RX) */
else if ((wEPVal & EP_CTR_TX) != 0)
{
/* clear int flag */
_ClearEP_CTR_TX(EPindex);
/* call IN service function */
(*pEpInt_IN[EPindex-1])();
} /* if((wEPVal & EP_CTR_TX) != 0) */
}/* while(...) */
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

87
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/src/usb_mem.c Normal file
View File

@ -0,0 +1,87 @@
/**
******************************************************************************
* @file usb_mem.c
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Utility functions for memory transfers to/from PMA
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : UserToPMABufferCopy
* Description : Copy a buffer from user memory area to packet memory area (PMA)
* Input : - pbUsrBuf: pointer to user memory area.
* - wPMABufAddr: address into PMA.
* - wNBytes: no. of bytes to be copied.
* Output : None.
* Return : None .
*******************************************************************************/
void UserToPMABufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
{
uint32_t n = (wNBytes + 1) >> 1; /* n = (wNBytes + 1) / 2 */
uint32_t i, temp1, temp2;
uint16_t *pdwVal;
pdwVal = (uint16_t *)(wPMABufAddr * 2 + PMAAddr);
for (i = n; i != 0; i--)
{
temp1 = (uint16_t) * pbUsrBuf;
pbUsrBuf++;
temp2 = temp1 | (uint16_t) * pbUsrBuf << 8;
*pdwVal++ = temp2;
pdwVal++;
pbUsrBuf++;
}
}
/*******************************************************************************
* Function Name : PMAToUserBufferCopy
* Description : Copy a buffer from user memory area to packet memory area (PMA)
* Input : - pbUsrBuf = pointer to user memory area.
* - wPMABufAddr = address into PMA.
* - wNBytes = no. of bytes to be copied.
* Output : None.
* Return : None.
*******************************************************************************/
void PMAToUserBufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
{
uint32_t n = (wNBytes + 1) >> 1;/* /2*/
uint32_t i;
uint32_t *pdwVal;
pdwVal = (uint32_t *)(wPMABufAddr * 2 + PMAAddr);
for (i = n; i != 0; i--)
{
*(uint16_t*)pbUsrBuf++ = *pdwVal++;
pbUsrBuf++;
}
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

760
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/src/usb_regs.c Normal file
View File

@ -0,0 +1,760 @@
/**
******************************************************************************
* @file usb_regs.c
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Interface functions to USB cell registers
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : SetCNTR.
* Description : Set the CNTR register value.
* Input : wRegValue: new register value.
* Output : None.
* Return : None.
*******************************************************************************/
void SetCNTR(uint16_t wRegValue)
{
_SetCNTR(wRegValue);
}
/*******************************************************************************
* Function Name : GetCNTR.
* Description : returns the CNTR register value.
* Input : None.
* Output : None.
* Return : CNTR register Value.
*******************************************************************************/
uint16_t GetCNTR(void)
{
return(_GetCNTR());
}
/*******************************************************************************
* Function Name : SetISTR.
* Description : Set the ISTR register value.
* Input : wRegValue: new register value.
* Output : None.
* Return : None.
*******************************************************************************/
void SetISTR(uint16_t wRegValue)
{
_SetISTR(wRegValue);
}
/*******************************************************************************
* Function Name : GetISTR
* Description : Returns the ISTR register value.
* Input : None.
* Output : None.
* Return : ISTR register Value
*******************************************************************************/
uint16_t GetISTR(void)
{
return(_GetISTR());
}
/*******************************************************************************
* Function Name : GetFNR
* Description : Returns the FNR register value.
* Input : None.
* Output : None.
* Return : FNR register Value
*******************************************************************************/
uint16_t GetFNR(void)
{
return(_GetFNR());
}
/*******************************************************************************
* Function Name : SetDADDR
* Description : Set the DADDR register value.
* Input : wRegValue: new register value.
* Output : None.
* Return : None.
*******************************************************************************/
void SetDADDR(uint16_t wRegValue)
{
_SetDADDR(wRegValue);
}
/*******************************************************************************
* Function Name : GetDADDR
* Description : Returns the DADDR register value.
* Input : None.
* Output : None.
* Return : DADDR register Value
*******************************************************************************/
uint16_t GetDADDR(void)
{
return(_GetDADDR());
}
/*******************************************************************************
* Function Name : SetBTABLE
* Description : Set the BTABLE.
* Input : wRegValue: New register value.
* Output : None.
* Return : None.
*******************************************************************************/
void SetBTABLE(uint16_t wRegValue)
{
_SetBTABLE(wRegValue);
}
/*******************************************************************************
* Function Name : GetBTABLE.
* Description : Returns the BTABLE register value.
* Input : None.
* Output : None.
* Return : BTABLE address.
*******************************************************************************/
uint16_t GetBTABLE(void)
{
return(_GetBTABLE());
}
/*******************************************************************************
* Function Name : SetENDPOINT
* Description : Set the Endpoint register value.
* Input : bEpNum: Endpoint Number.
* wRegValue.
* Output : None.
* Return : None.
*******************************************************************************/
void SetENDPOINT(uint8_t bEpNum, uint16_t wRegValue)
{
_SetENDPOINT(bEpNum, wRegValue);
}
/*******************************************************************************
* Function Name : GetENDPOINT
* Description : Return the Endpoint register value.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Endpoint register value.
*******************************************************************************/
uint16_t GetENDPOINT(uint8_t bEpNum)
{
return(_GetENDPOINT(bEpNum));
}
/*******************************************************************************
* Function Name : SetEPType
* Description : sets the type in the endpoint register.
* Input : bEpNum: Endpoint Number.
* wType: type definition.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPType(uint8_t bEpNum, uint16_t wType)
{
_SetEPType(bEpNum, wType);
}
/*******************************************************************************
* Function Name : GetEPType
* Description : Returns the endpoint type.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Endpoint Type
*******************************************************************************/
uint16_t GetEPType(uint8_t bEpNum)
{
return(_GetEPType(bEpNum));
}
/*******************************************************************************
* Function Name : SetEPTxStatus
* Description : Set the status of Tx endpoint.
* Input : bEpNum: Endpoint Number.
* wState: new state.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPTxStatus(uint8_t bEpNum, uint16_t wState)
{
_SetEPTxStatus(bEpNum, wState);
}
/*******************************************************************************
* Function Name : SetEPRxStatus
* Description : Set the status of Rx endpoint.
* Input : bEpNum: Endpoint Number.
* wState: new state.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPRxStatus(uint8_t bEpNum, uint16_t wState)
{
_SetEPRxStatus(bEpNum, wState);
}
/*******************************************************************************
* Function Name : SetDouBleBuffEPStall
* Description : sets the status for Double Buffer Endpoint to STALL
* Input : bEpNum: Endpoint Number.
* bDir: Endpoint direction.
* Output : None.
* Return : None.
*******************************************************************************/
void SetDouBleBuffEPStall(uint8_t bEpNum, uint8_t bDir)
{
uint16_t Endpoint_DTOG_Status;
Endpoint_DTOG_Status = GetENDPOINT(bEpNum);
if (bDir == EP_DBUF_OUT)
{ /* OUT double buffered endpoint */
_SetENDPOINT(bEpNum, Endpoint_DTOG_Status & ~EPRX_DTOG1);
}
else if (bDir == EP_DBUF_IN)
{ /* IN double buffered endpoint */
_SetENDPOINT(bEpNum, Endpoint_DTOG_Status & ~EPTX_DTOG1);
}
}
/*******************************************************************************
* Function Name : GetEPTxStatus
* Description : Returns the endpoint Tx status.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Endpoint TX Status
*******************************************************************************/
uint16_t GetEPTxStatus(uint8_t bEpNum)
{
return(_GetEPTxStatus(bEpNum));
}
/*******************************************************************************
* Function Name : GetEPRxStatus
* Description : Returns the endpoint Rx status.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Endpoint RX Status
*******************************************************************************/
uint16_t GetEPRxStatus(uint8_t bEpNum)
{
return(_GetEPRxStatus(bEpNum));
}
/*******************************************************************************
* Function Name : SetEPTxValid
* Description : Valid the endpoint Tx Status.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPTxValid(uint8_t bEpNum)
{
_SetEPTxStatus(bEpNum, EP_TX_VALID);
}
/*******************************************************************************
* Function Name : SetEPRxValid
* Description : Valid the endpoint Rx Status.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPRxValid(uint8_t bEpNum)
{
_SetEPRxStatus(bEpNum, EP_RX_VALID);
}
/*******************************************************************************
* Function Name : SetEP_KIND
* Description : Clear the EP_KIND bit.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEP_KIND(uint8_t bEpNum)
{
_SetEP_KIND(bEpNum);
}
/*******************************************************************************
* Function Name : ClearEP_KIND
* Description : set the EP_KIND bit.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void ClearEP_KIND(uint8_t bEpNum)
{
_ClearEP_KIND(bEpNum);
}
/*******************************************************************************
* Function Name : Clear_Status_Out
* Description : Clear the Status Out of the related Endpoint
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void Clear_Status_Out(uint8_t bEpNum)
{
_ClearEP_KIND(bEpNum);
}
/*******************************************************************************
* Function Name : Set_Status_Out
* Description : Set the Status Out of the related Endpoint
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void Set_Status_Out(uint8_t bEpNum)
{
_SetEP_KIND(bEpNum);
}
/*******************************************************************************
* Function Name : SetEPDoubleBuff
* Description : Enable the double buffer feature for the endpoint.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPDoubleBuff(uint8_t bEpNum)
{
_SetEP_KIND(bEpNum);
}
/*******************************************************************************
* Function Name : ClearEPDoubleBuff
* Description : Disable the double buffer feature for the endpoint.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void ClearEPDoubleBuff(uint8_t bEpNum)
{
_ClearEP_KIND(bEpNum);
}
/*******************************************************************************
* Function Name : GetTxStallStatus
* Description : Returns the Stall status of the Tx endpoint.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Tx Stall status.
*******************************************************************************/
uint16_t GetTxStallStatus(uint8_t bEpNum)
{
return(_GetTxStallStatus(bEpNum));
}
/*******************************************************************************
* Function Name : GetRxStallStatus
* Description : Returns the Stall status of the Rx endpoint.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Rx Stall status.
*******************************************************************************/
uint16_t GetRxStallStatus(uint8_t bEpNum)
{
return(_GetRxStallStatus(bEpNum));
}
/*******************************************************************************
* Function Name : ClearEP_CTR_RX
* Description : Clear the CTR_RX bit.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void ClearEP_CTR_RX(uint8_t bEpNum)
{
_ClearEP_CTR_RX(bEpNum);
}
/*******************************************************************************
* Function Name : ClearEP_CTR_TX
* Description : Clear the CTR_TX bit.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void ClearEP_CTR_TX(uint8_t bEpNum)
{
_ClearEP_CTR_TX(bEpNum);
}
/*******************************************************************************
* Function Name : ToggleDTOG_RX
* Description : Toggle the DTOG_RX bit.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void ToggleDTOG_RX(uint8_t bEpNum)
{
_ToggleDTOG_RX(bEpNum);
}
/*******************************************************************************
* Function Name : ToggleDTOG_TX
* Description : Toggle the DTOG_TX bit.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void ToggleDTOG_TX(uint8_t bEpNum)
{
_ToggleDTOG_TX(bEpNum);
}
/*******************************************************************************
* Function Name : ClearDTOG_RX.
* Description : Clear the DTOG_RX bit.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void ClearDTOG_RX(uint8_t bEpNum)
{
_ClearDTOG_RX(bEpNum);
}
/*******************************************************************************
* Function Name : ClearDTOG_TX.
* Description : Clear the DTOG_TX bit.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void ClearDTOG_TX(uint8_t bEpNum)
{
_ClearDTOG_TX(bEpNum);
}
/*******************************************************************************
* Function Name : SetEPAddress
* Description : Set the endpoint address.
* Input : bEpNum: Endpoint Number.
* bAddr: New endpoint address.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPAddress(uint8_t bEpNum, uint8_t bAddr)
{
_SetEPAddress(bEpNum, bAddr);
}
/*******************************************************************************
* Function Name : GetEPAddress
* Description : Get the endpoint address.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Endpoint address.
*******************************************************************************/
uint8_t GetEPAddress(uint8_t bEpNum)
{
return(_GetEPAddress(bEpNum));
}
/*******************************************************************************
* Function Name : SetEPTxAddr
* Description : Set the endpoint Tx buffer address.
* Input : bEpNum: Endpoint Number.
* wAddr: new address.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPTxAddr(uint8_t bEpNum, uint16_t wAddr)
{
_SetEPTxAddr(bEpNum, wAddr);
}
/*******************************************************************************
* Function Name : SetEPRxAddr
* Description : Set the endpoint Rx buffer address.
* Input : bEpNum: Endpoint Number.
* wAddr: new address.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPRxAddr(uint8_t bEpNum, uint16_t wAddr)
{
_SetEPRxAddr(bEpNum, wAddr);
}
/*******************************************************************************
* Function Name : GetEPTxAddr
* Description : Returns the endpoint Tx buffer address.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Rx buffer address.
*******************************************************************************/
uint16_t GetEPTxAddr(uint8_t bEpNum)
{
return(_GetEPTxAddr(bEpNum));
}
/*******************************************************************************
* Function Name : GetEPRxAddr.
* Description : Returns the endpoint Rx buffer address.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Rx buffer address.
*******************************************************************************/
uint16_t GetEPRxAddr(uint8_t bEpNum)
{
return(_GetEPRxAddr(bEpNum));
}
/*******************************************************************************
* Function Name : SetEPTxCount.
* Description : Set the Tx count.
* Input : bEpNum: Endpoint Number.
* wCount: new count value.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPTxCount(uint8_t bEpNum, uint16_t wCount)
{
_SetEPTxCount(bEpNum, wCount);
}
/*******************************************************************************
* Function Name : SetEPCountRxReg.
* Description : Set the Count Rx Register value.
* Input : *pdwReg: point to the register.
* wCount: the new register value.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPCountRxReg(uint32_t *pdwReg, uint16_t wCount)
{
_SetEPCountRxReg(dwReg, wCount);
}
/*******************************************************************************
* Function Name : SetEPRxCount
* Description : Set the Rx count.
* Input : bEpNum: Endpoint Number.
* wCount: the new count value.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPRxCount(uint8_t bEpNum, uint16_t wCount)
{
_SetEPRxCount(bEpNum, wCount);
}
/*******************************************************************************
* Function Name : GetEPTxCount
* Description : Get the Tx count.
* Input : bEpNum: Endpoint Number.
* Output : None
* Return : Tx count value.
*******************************************************************************/
uint16_t GetEPTxCount(uint8_t bEpNum)
{
return(_GetEPTxCount(bEpNum));
}
/*******************************************************************************
* Function Name : GetEPRxCount
* Description : Get the Rx count.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Rx count value.
*******************************************************************************/
uint16_t GetEPRxCount(uint8_t bEpNum)
{
return(_GetEPRxCount(bEpNum));
}
/*******************************************************************************
* Function Name : SetEPDblBuffAddr
* Description : Set the addresses of the buffer 0 and 1.
* Input : bEpNum: Endpoint Number.
* wBuf0Addr: new address of buffer 0.
* wBuf1Addr: new address of buffer 1.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPDblBuffAddr(uint8_t bEpNum, uint16_t wBuf0Addr, uint16_t wBuf1Addr)
{
_SetEPDblBuffAddr(bEpNum, wBuf0Addr, wBuf1Addr);
}
/*******************************************************************************
* Function Name : SetEPDblBuf0Addr
* Description : Set the Buffer 1 address.
* Input : bEpNum: Endpoint Number
* wBuf0Addr: new address.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPDblBuf0Addr(uint8_t bEpNum, uint16_t wBuf0Addr)
{
_SetEPDblBuf0Addr(bEpNum, wBuf0Addr);
}
/*******************************************************************************
* Function Name : SetEPDblBuf1Addr
* Description : Set the Buffer 1 address.
* Input : bEpNum: Endpoint Number
* wBuf1Addr: new address.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPDblBuf1Addr(uint8_t bEpNum, uint16_t wBuf1Addr)
{
_SetEPDblBuf1Addr(bEpNum, wBuf1Addr);
}
/*******************************************************************************
* Function Name : GetEPDblBuf0Addr
* Description : Returns the address of the Buffer 0.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
uint16_t GetEPDblBuf0Addr(uint8_t bEpNum)
{
return(_GetEPDblBuf0Addr(bEpNum));
}
/*******************************************************************************
* Function Name : GetEPDblBuf1Addr
* Description : Returns the address of the Buffer 1.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Address of the Buffer 1.
*******************************************************************************/
uint16_t GetEPDblBuf1Addr(uint8_t bEpNum)
{
return(_GetEPDblBuf1Addr(bEpNum));
}
/*******************************************************************************
* Function Name : SetEPDblBuffCount
* Description : Set the number of bytes for a double Buffer
* endpoint.
* Input : bEpNum,bDir, wCount
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPDblBuffCount(uint8_t bEpNum, uint8_t bDir, uint16_t wCount)
{
_SetEPDblBuffCount(bEpNum, bDir, wCount);
}
/*******************************************************************************
* Function Name : SetEPDblBuf0Count
* Description : Set the number of bytes in the buffer 0 of a double Buffer
* endpoint.
* Input : bEpNum, bDir, wCount
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPDblBuf0Count(uint8_t bEpNum, uint8_t bDir, uint16_t wCount)
{
_SetEPDblBuf0Count(bEpNum, bDir, wCount);
}
/*******************************************************************************
* Function Name : SetEPDblBuf1Count
* Description : Set the number of bytes in the buffer 0 of a double Buffer
* endpoint.
* Input : bEpNum, bDir, wCount
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPDblBuf1Count(uint8_t bEpNum, uint8_t bDir, uint16_t wCount)
{
_SetEPDblBuf1Count(bEpNum, bDir, wCount);
}
/*******************************************************************************
* Function Name : GetEPDblBuf0Count
* Description : Returns the number of byte received in the buffer 0 of a double
* Buffer endpoint.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Endpoint Buffer 0 count
*******************************************************************************/
uint16_t GetEPDblBuf0Count(uint8_t bEpNum)
{
return(_GetEPDblBuf0Count(bEpNum));
}
/*******************************************************************************
* Function Name : GetEPDblBuf1Count
* Description : Returns the number of data received in the buffer 1 of a double
* Buffer endpoint.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Endpoint Buffer 1 count.
*******************************************************************************/
uint16_t GetEPDblBuf1Count(uint8_t bEpNum)
{
return(_GetEPDblBuf1Count(bEpNum));
}
/*******************************************************************************
* Function Name : GetEPDblBufDir
* Description : gets direction of the double buffered endpoint
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : EP_DBUF_OUT, EP_DBUF_IN,
* EP_DBUF_ERR if the endpoint counter not yet programmed.
*******************************************************************************/
EP_DBUF_DIR GetEPDblBufDir(uint8_t bEpNum)
{
if ((uint16_t)(*_pEPRxCount(bEpNum) & 0xFC00) != 0)
return(EP_DBUF_OUT);
else if (((uint16_t)(*_pEPTxCount(bEpNum)) & 0x03FF) != 0)
return(EP_DBUF_IN);
else
return(EP_DBUF_ERR);
}
/*******************************************************************************
* Function Name : FreeUserBuffer
* Description : free buffer used from the application realizing it to the line
toggles bit SW_BUF in the double buffered endpoint register
* Input : bEpNum, bDir
* Output : None.
* Return : None.
*******************************************************************************/
void FreeUserBuffer(uint8_t bEpNum, uint8_t bDir)
{
if (bDir == EP_DBUF_OUT)
{ /* OUT double buffered endpoint */
_ToggleDTOG_TX(bEpNum);
}
else if (bDir == EP_DBUF_IN)
{ /* IN double buffered endpoint */
_ToggleDTOG_RX(bEpNum);
}
}
/*******************************************************************************
* Function Name : ToWord
* Description : merge two byte in a word.
* Input : bh: byte high, bl: bytes low.
* Output : None.
* Return : resulted word.
*******************************************************************************/
uint16_t ToWord(uint8_t bh, uint8_t bl)
{
uint16_t wRet;
wRet = (uint16_t)bl | ((uint16_t)bh << 8);
return(wRet);
}
/*******************************************************************************
* Function Name : ByteSwap
* Description : Swap two byte in a word.
* Input : wSwW: word to Swap.
* Output : None.
* Return : resulted word.
*******************************************************************************/
uint16_t ByteSwap(uint16_t wSwW)
{
uint8_t bTemp;
uint16_t wRet;
bTemp = (uint8_t)(wSwW & 0xff);
wRet = (wSwW >> 8) | ((uint16_t)bTemp << 8);
return(wRet);
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

103
FW/Core/001-base_rt/USB/air32_USB-FS-Device_Driver/src/usb_sil.c Normal file
View File

@ -0,0 +1,103 @@
/**
******************************************************************************
* @file usb_sil.c
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Simplified Interface Layer for Global Initialization and Endpoint
* Rea/Write operations.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : USB_SIL_Init
* Description : Initialize the USB Device IP and the Endpoint 0.
* Input : None.
* Output : None.
* Return : Status.
*******************************************************************************/
uint32_t USB_SIL_Init(void)
{
/* USB interrupts initialization */
/* clear pending interrupts */
_SetISTR(0);
wInterrupt_Mask = IMR_MSK;
/* set interrupts mask */
_SetCNTR(wInterrupt_Mask);
return 0;
}
/*******************************************************************************
* Function Name : USB_SIL_Write
* Description : Write a buffer of data to a selected endpoint.
* Input : - bEpAddr: The address of the non control endpoint.
* - pBufferPointer: The pointer to the buffer of data to be written
* to the endpoint.
* - wBufferSize: Number of data to be written (in bytes).
* Output : None.
* Return : Status.
*******************************************************************************/
uint32_t USB_SIL_Write(uint8_t bEpAddr, uint8_t* pBufferPointer, uint32_t wBufferSize)
{
/* Use the memory interface function to write to the selected endpoint */
UserToPMABufferCopy(pBufferPointer, GetEPTxAddr(bEpAddr & 0x7F), wBufferSize);
/* Update the data length in the control register */
SetEPTxCount((bEpAddr & 0x7F), wBufferSize);
return 0;
}
/*******************************************************************************
* Function Name : USB_SIL_Read
* Description : Write a buffer of data to a selected endpoint.
* Input : - bEpAddr: The address of the non control endpoint.
* - pBufferPointer: The pointer to which will be saved the
* received data buffer.
* Output : None.
* Return : Number of received data (in Bytes).
*******************************************************************************/
uint32_t USB_SIL_Read(uint8_t bEpAddr, uint8_t* pBufferPointer)
{
uint32_t DataLength = 0;
/* Get the number of received data on the selected Endpoint */
DataLength = GetEPRxCount(bEpAddr & 0x7F);
/* Use the memory interface function to write to the selected endpoint */
PMAToUserBufferCopy(pBufferPointer, GetEPRxAddr(bEpAddr & 0x7F), DataLength);
/* Return the number of received data */
return DataLength;
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

36
FW/Core/001-base_rt/USB/system.c Normal file
View File

@ -0,0 +1,36 @@
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include "usb_lib.h"
#include "hw_config.h"
#include "usb_pwr.h"
#include <rtthread.h>
#include <rtdevice.h>
#include <board.h>
//USB唤醒中断服务函数
void USBWakeUp_IRQHandler(void)
{
EXTI_ClearITPendingBit(EXTI_Line18);//清除USB唤醒中断挂起位
}
//USB中断处理函数
void USB_LP_CAN1_RX0_IRQHandler(void)
{
rt_interrupt_enter();
extern void USB_Istr();
USB_Istr();
rt_interrupt_leave();
}
static int usb_init()
{
Set_USBClock();
USB_Interrupts_Config();
USB_Init();
DP_PUUP = 1;
return 0;
}
INIT_ENV_EXPORT(usb_init);

55
FW/Core/001-base_rt/USB/system.h Normal file
View File

@ -0,0 +1,55 @@
#ifndef _system_H
#define _system_H
#include "air32f10x.h"
#define BITBAND(addr, bitnum) ((addr & 0xF0000000)+0x2000000+((addr &0xFFFFF)<<5)+(bitnum<<2))
#define MEM_ADDR(addr) *((volatile unsigned long *)(addr))
#define BIT_ADDR(addr, bitnum) MEM_ADDR(BITBAND(addr, bitnum))
#define GPIOA_ODR_Addr (GPIOA_BASE+12) //0x4001080C
#define GPIOB_ODR_Addr (GPIOB_BASE+12) //0x40010C0C
#define GPIOC_ODR_Addr (GPIOC_BASE+12) //0x4001100C
#define GPIOD_ODR_Addr (GPIOD_BASE+12) //0x4001140C
#define GPIOE_ODR_Addr (GPIOE_BASE+12) //0x4001180C
#define GPIOF_ODR_Addr (GPIOF_BASE+12) //0x40011A0C
#define GPIOG_ODR_Addr (GPIOG_BASE+12) //0x40011E0C
#define GPIOA_IDR_Addr (GPIOA_BASE+8) //0x40010808
#define GPIOB_IDR_Addr (GPIOB_BASE+8) //0x40010C08
#define GPIOC_IDR_Addr (GPIOC_BASE+8) //0x40011008
#define GPIOD_IDR_Addr (GPIOD_BASE+8) //0x40011408
#define GPIOE_IDR_Addr (GPIOE_BASE+8) //0x40011808
#define GPIOF_IDR_Addr (GPIOF_BASE+8) //0x40011A08
#define GPIOG_IDR_Addr (GPIOG_BASE+8) //0x40011E08
#define PAout(n) BIT_ADDR(GPIOA_ODR_Addr,n)
#define PAin(n) BIT_ADDR(GPIOA_IDR_Addr,n)
#define PBout(n) BIT_ADDR(GPIOB_ODR_Addr,n)
#define PBin(n) BIT_ADDR(GPIOB_IDR_Addr,n)
#define PCout(n) BIT_ADDR(GPIOC_ODR_Addr,n)
#define PCin(n) BIT_ADDR(GPIOC_IDR_Addr,n)
#define PDout(n) BIT_ADDR(GPIOD_ODR_Addr,n)
#define PDin(n) BIT_ADDR(GPIOD_IDR_Addr,n)
#define PEout(n) BIT_ADDR(GPIOE_ODR_Addr,n)
#define PEin(n) BIT_ADDR(GPIOE_IDR_Addr,n)
#define PFout(n) BIT_ADDR(GPIOF_ODR_Addr,n)
#define PFin(n) BIT_ADDR(GPIOF_IDR_Addr,n)
#define PGout(n) BIT_ADDR(GPIOG_ODR_Addr,n)
#define PGin(n) BIT_ADDR(GPIOG_IDR_Addr,n)
#include <rtthread.h>
#include <rtdevice.h>
#include <board.h>
#define printf(...)
#endif

1392
FW/Core/001-base_rt/project.uvoptx
View File

File diff suppressed because it is too large Load Diff

1758
FW/Core/001-base_rt/project.uvprojx
View File

File diff suppressed because it is too large Load Diff

10
FW/Core/001-base_rt/rtconfig.h
View File

@ -44,6 +44,7 @@
#define RT_USING_MEMPOOL
#define RT_USING_SMALL_MEM
#define RT_USING_SMALL_MEM_AS_HEAP
#define RT_USING_HEAP_ISR
#define RT_USING_HEAP
#define RT_USING_DEVICE
#define RT_USING_CONSOLE
@ -163,6 +164,15 @@
/* Wiced WiFi */
/* CYW43012 WiFi */
/* BL808 WiFi */
/* CYW43439 WiFi */
/* IoT Cloud */