Help: Remove accidental blockquotes around lists

Indenting a list relative to the previous paragraph creates
a blockquote. Combined with the natural list indent it results
in an overly large left margin.

Help/command/add_custom_command.rst

@@ -151,7 +151,6 @@ The options are:
   List target names with the ``DEPENDS`` option to add such file-level
   dependencies.
 
-
 ``COMMENT``
   Display the given message before the commands are executed at
   build time.  This will be ignored if ``APPEND`` is given, although a future

Help/command/find_package.rst

@@ -208,9 +208,9 @@ The ``[version]`` argument requests a version with which the package found
 should be compatible. There are two possible forms in which it may be
 specified:
 
-  * A single version with the format ``major[.minor[.patch[.tweak]]]``, where
+* A single version with the format ``major[.minor[.patch[.tweak]]]``, where
   each component is a numeric value.
-  * A version range with the format ``versionMin...[<]versionMax`` where
+* A version range with the format ``versionMin...[<]versionMax`` where
   ``versionMin`` and ``versionMax`` have the same format and constraints
   on components being integers as the single version.  By default, both end
   points are included.  By specifying ``<``, the upper end point will be

Help/command/set_source_files_properties.rst

@@ -19,14 +19,14 @@ list.
   same directory (``CMakeLists.txt``).  Visibility can be set in other directory
   scopes using one or both of the following options:
 
-``DIRECTORY <dirs>...``
+  ``DIRECTORY <dirs>...``
     The source file properties will be set in each of the ``<dirs>``
     directories' scopes.  CMake must already know about each of these
     source directories, either by having added them through a call to
     :command:`add_subdirectory` or it being the top level source directory.
     Relative paths are treated as relative to the current source directory.
 
-``TARGET_DIRECTORY <targets>...``
+  ``TARGET_DIRECTORY <targets>...``
     The source file properties will be set in each of the directory scopes
     where any of the specified ``<targets>`` were created (the ``<targets>``
     must therefore already exist).

Help/cpack_gen/deb.rst

@@ -25,8 +25,8 @@ or a component GROUP name.
 Here are some CPack DEB generator wiki resources that are here for historic
 reasons and are no longer maintained but may still prove useful:
 
- - https://gitlab.kitware.com/cmake/community/-/wikis/doc/cpack/Configuration
- - https://gitlab.kitware.com/cmake/community/-/wikis/doc/cpack/PackageGenerators#deb-unix-only
+- https://gitlab.kitware.com/cmake/community/-/wikis/doc/cpack/Configuration
+- https://gitlab.kitware.com/cmake/community/-/wikis/doc/cpack/PackageGenerators#deb-unix-only
 
 List of CPack DEB generator specific variables:
 

Help/cpack_gen/rpm.rst

@@ -36,8 +36,8 @@ https://rpm.org/documentation.
 Here are some CPack RPM generator wiki resources that are here for historic
 reasons and are no longer maintained but may still prove useful:
 
- - https://gitlab.kitware.com/cmake/community/-/wikis/doc/cpack/Configuration
- - https://gitlab.kitware.com/cmake/community/-/wikis/doc/cpack/PackageGenerators#rpm-unix-only
+- https://gitlab.kitware.com/cmake/community/-/wikis/doc/cpack/Configuration
+- https://gitlab.kitware.com/cmake/community/-/wikis/doc/cpack/PackageGenerators#rpm-unix-only
 
 List of CPack RPM generator specific variables:
 

Help/policy/CMP0112.rst

@@ -8,18 +8,18 @@ Target file component generator expressions do not add target dependencies.
 The following target-based generator expressions that query for directory or
 file name components no longer add a dependency on the evaluated target.
 
-    - ``TARGET_FILE_NAME``
-    - ``TARGET_FILE_DIR``
-    - ``TARGET_LINKER_FILE_BASE_NAME``
-    - ``TARGET_LINKER_FILE_NAME``
-    - ``TARGET_LINKER_FILE_DIR``
-    - ``TARGET_SONAME_FILE_NAME``
-    - ``TARGET_SONAME_FILE_DIR``
-    - ``TARGET_PDB_FILE_NAME``
-    - ``TARGET_PDB_FILE_DIR``
-    - ``TARGET_BUNDLE_DIR``
-    - ``TARGET_BUNDLE_DIR_NAME``
-    - ``TARGET_BUNDLE_CONTENT_DIR``
+- ``TARGET_FILE_NAME``
+- ``TARGET_FILE_DIR``
+- ``TARGET_LINKER_FILE_BASE_NAME``
+- ``TARGET_LINKER_FILE_NAME``
+- ``TARGET_LINKER_FILE_DIR``
+- ``TARGET_SONAME_FILE_NAME``
+- ``TARGET_SONAME_FILE_DIR``
+- ``TARGET_PDB_FILE_NAME``
+- ``TARGET_PDB_FILE_DIR``
+- ``TARGET_BUNDLE_DIR``
+- ``TARGET_BUNDLE_DIR_NAME``
+- ``TARGET_BUNDLE_CONTENT_DIR``
 
 
 In CMake 3.18 and lower a dependency on the evaluated target of the above

Help/prop_test/ENVIRONMENT_MODIFICATION.rst

@@ -13,25 +13,25 @@ where ``MYVAR`` is the case-sensitive name of an environment variable
 to be modified.  Entries are considered in the order specified in the
 property's value.  The ``OP`` may be one of:
 
-  - ``reset``: Reset to the unmodified value, ignoring all modifications to
+- ``reset``: Reset to the unmodified value, ignoring all modifications to
   ``MYVAR`` prior to this entry. Note that this will reset the variable to
   the value set by :prop_test:`ENVIRONMENT`, if it was set, and otherwise
   to its state from the rest of the CTest execution.
-  - ``set``: Replaces the current value of ``MYVAR`` with ``VALUE``.
-  - ``unset``: Unsets the current value of ``MYVAR``.
-  - ``string_append``: Appends singular ``VALUE`` to the current value of
+- ``set``: Replaces the current value of ``MYVAR`` with ``VALUE``.
+- ``unset``: Unsets the current value of ``MYVAR``.
+- ``string_append``: Appends singular ``VALUE`` to the current value of
   ``MYVAR``.
-  - ``string_prepend``: Prepends singular ``VALUE`` to the current value of
+- ``string_prepend``: Prepends singular ``VALUE`` to the current value of
   ``MYVAR``.
-  - ``path_list_append``: Appends singular ``VALUE`` to the current value of
+- ``path_list_append``: Appends singular ``VALUE`` to the current value of
   ``MYVAR`` using the host platform's path list separator (``;`` on Windows
   and ``:`` elsewhere).
-  - ``path_list_prepend``: Prepends singular ``VALUE`` to the current value of
+- ``path_list_prepend``: Prepends singular ``VALUE`` to the current value of
   ``MYVAR`` using the host platform's path list separator (``;`` on Windows
   and ``:`` elsewhere).
-  - ``cmake_list_append``: Appends singular ``VALUE`` to the current value of
+- ``cmake_list_append``: Appends singular ``VALUE`` to the current value of
   ``MYVAR`` using ``;`` as the separator.
-  - ``cmake_list_prepend``: Prepends singular ``VALUE`` to the current value of
+- ``cmake_list_prepend``: Prepends singular ``VALUE`` to the current value of
   ``MYVAR`` using ``;`` as the separator.
 
 Unrecognized ``OP`` values will result in the test failing before it is

Modules/CSharpUtilities.cmake

@@ -84,14 +84,17 @@ Main functions provided by the module
   are set depending on the extension of the matched file:
 
   if match is **.resx** file:
+
   - VS_CSHARP_AutoGen "True"
   - VS_CSHARP_DesignTime "True"
   - VS_CSHARP_DependentUpon <resx-filename>
 
   if match is **.cs** file:
+
   - VS_CSHARP_DependentUpon <cs-filename>
 
   if match is **.settings** file:
+
   - VS_CSHARP_AutoGen "True"
   - VS_CSHARP_DesignTimeSharedInput "True"
   - VS_CSHARP_DependentUpon <settings-filename>