Conflicts:
acinclude.m4
config-win32.h
configure.ac
misc.c
thread.c
thread.h
- These conflicts was mainly due to feat_misc getting old
and mostly caused by the pthread clean-up patches in
feat_misc
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
This code was not activated at all, and hard coded as disabled in syshead.h
with this code snippet:
/*
* Pthread support is currently experimental (and quite unfinished).
*/
#if 1 /* JYFIXME -- if defined, disable pthread */
#undef USE_PTHREAD
#endif
So no matter if --enable-pthread when running ./configure or not, this feature
was never enabled in reality. Further, by removing the blocker code above made
OpenVPN uncompilable in the current state.
As the threading part needs to be completely rewritten and pthreading will not be
supported in OpenVPN 2.x, removing this code seems most reasonable.
In addition, a lot of mutex locking code was also removed, as they were practically
NOP functions, due to pthreading being forcefully disabled
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
where credentials are entered from stdin. This capability is
compiled when ENABLE_CLIENT_CR is defined in syshead.h (enabled
by default).
Challenge/response support was previously implemented for creds
that are queried via the management interface. In this case,
the challenge message will be returned as a custom
client-reason-text string (see management-notes.txt for more
info) on auth failure.
Also, see the comments in misc.c above get_auth_challenge()
for info on the OpenVPN challenge/response protocol.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6568 e7ae566f-a301-0410-adde-c780ea21d3b5
The main task of this patch is to avoid reporting the SCRIPT_SECURITY_WARNING
over and over again, in addition to not show this warning when it should not
be a problem. This general warning should now only appear once, and only when
--script-security is not set, 0 or 1. In all other cases this warning should
not appear.
In addition, this warning will come close to the script-hook which most probably
will fail. It will also give a little bit more concrete hint on which script-hook
which failed. If --script-security is 2 or 3, only the execve failure itself will
be shown. This message will on the other hand be shown repeatedly.
This is a new rewritten version which simplifies the implementaion of the new
openvpn_run_script() function. It was considered to remove it completely, but
due to code clearity and easy of use it was decided to make this function a static
inline function instead. Anyhow, this function will enforce openvpn_execve_check()
to be called with the S_SCRIPT flag.
Patch ACKed on the developers meeting 2009-04-29.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
The warnings reported where:
--------------------------------------------------------
misc.c:158: warning: ignoring return value of ‘nice’, declared with attribute warn_unused_result
options.c:4033: warning: format not a string literal and no format arguments
options.c:4043: warning: format not a string literal and no format arguments
options.c:4053: warning: format not a string literal and no format arguments
push.c:182: warning: format not a string literal and no format arguments
push.c:199: warning: format not a string literal and no format arguments
push.c:235: warning: format not a string literal and no format arguments
status.c:171: warning: ignoring return value of ‘ftruncate’, declared with attribute warn_unused_result
--------------------------------------------------------
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: Gert Doering <gert@greenie.muc.de>
Acked-by: Peter Stuge <peter@stuge.se>
For OpenVPN clients with long living connections, this message is repeated
everytime the connection is renegotiated. This patch removes this behaviour
and will only show this warning once.
Patch ACKed on the developers meeting 2009-04-29.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
By hardening the create_temp_filename() function to check if the generated
filename exists and to create the temp file with only S_IRUSR|S_IWUSR bit
files set before calling the script, it should become even more difficult to
exploit such a scenario.
After a discussion on the mailing list, Fabian Knittel provided an enhanced
version of the inital patch which is added to this patch.
This patch also renames create_temp_filename() to create_temp_file(), as this
patch also creates the temporary file. The function returns the filename of the
created file, or NULL on error.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: Fabian Knittel <fabian.knittel@avona.com>
Acked-by: Gert Doering <gert@greenie.muc.de>
easier for OpenVPN client UIs to start a pre-existing client config file with
proxy options, or to adaptively fall back to a proxy connection if a direct
connection fails.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5652 e7ae566f-a301-0410-adde-c780ea21d3b5
The main task of this patch is to avoid reporting the SCRIPT_SECURITY_WARNING
over and over again, in addition to not show this warning when it should not
be a problem. This general warning should now only appear once, and only when
--script-security is not set, 0 or 1. In all other cases this warning should
not appear.
In addition, this warning will come close to the script-hook which most probably
will fail. It will also give a little bit more concrete hint on which script-hook
which failed. If --script-security is 2 or 3, only the execve failure itself will
be shown. This message will on the other hand be shown repeatedly.
This is a new rewritten version which simplifies the implementaion of the new
openvpn_run_script() function. It was considered to remove it completely, but
due to code clearity and easy of use it was decided to make this function a static
inline function instead. Anyhow, this function will enforce openvpn_execve_check()
to be called with the S_SCRIPT flag.
Patch ACKed on the developers meeting 2009-04-29.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
domain socket, for example:
management /tmp/openvpn unix
Also added management-client-user and management-client-group
directives to control which processes are allowed to connect
to the socket.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3396 e7ae566f-a301-0410-adde-c780ea21d3b5
arguments since all scripts were called by system().
The security hardening changes made to 2.1_rc9 no longer
use system(), but rather use the safer execve or CreateProcess
system calls. The security hardening also introduced a
backward incompatibility with 2.1_rc8 and earlier in that
script parameters were no longer shell-expanded, so
for example:
client-connect "docc CLIENT-CONNECT"
would fail to work because execve would try to execute
a script called "docc CLIENT-CONNECT" instead of "docc"
with "CLIENT-CONNECT" as the first argument.
This patch fixes the issue, bringing the script argument
semantics back to pre 2.1_rc9 behavior in order to preserve
backward compatibility while still using execve or CreateProcess
to execute the script/executable.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3311 e7ae566f-a301-0410-adde-c780ea21d3b5
* All external programs and scripts are now called by execve() on unix and
CreateProcess on Windows.
* The system() function is no longer used.
* Argument lists for external programs and scripts are now built by the new
argv_printf function which natively outputs to string arrays (i.e.
char *argv[] lists), never truncates its output, and eliminates the security
issues inherent in formatting and parsing command lines, and dealing with
argument quoting.
* The --script-security directive has been added to offer policy controls on
OpenVPN's execution of external programs and scripts.
Also added a new plugin example (openvpn/plugin/examples/log.c) that logs
information to stdout for every plugin method called by OpenVPN.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3122 e7ae566f-a301-0410-adde-c780ea21d3b5
password if the verbosity was set to a high debug level
such as 7 or higher. Normally this would only be used by
developers. Now, even at high debug levels, the password
will not be output.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3073 e7ae566f-a301-0410-adde-c780ea21d3b5
by allowing openvpn --mktun to be used with --user and --group
to set the UID/GID of the tun device node. Also added --iproute
option to allow an alternative command to be executed in place
of the default iproute2 command (Alon Bar-Lev).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@2639 e7ae566f-a301-0410-adde-c780ea21d3b5
change the value of an existing name=value pair
would delay the freeing of the memory held by
the previous name=value pair until the underlying
client instance object is closed.
This could cause a server that handles long-term
client connections, resulting in many periodic calls
to verify_callback, to needlessly grow the env_set
memory allocation until the underlying client instance
object is closed.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@1493 e7ae566f-a301-0410-adde-c780ea21d3b5
Implemented AUTO_USERID using
MD5(MAC address(primary network adapter)).
Currently implemented for Linux and Windows.
Basically if ENABLE_AUTO_USERID is defined,
the --auth-user-pass option will not prompt
for username/password, but will rather generate
a unique username and blank password.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@1459 e7ae566f-a301-0410-adde-c780ea21d3b5
malicious or compromised server could potentially receive
"setenv" configuration directives from the server which could
cause arbitrary code execution on the client via a LD_PRELOAD
attack. A successful attack appears to require that (a) the
client has agreed to allow the server to push configuration
directives to it by including "pull" or the macro "client" in
its configuration file, (b) the client configuration file uses
a scripting directive such as "up" or "down", (c) the client
succesfully authenticates the server, (d) the server is
malicious or has been compromised and is under the control of
the attacker, and (e) the attacker has at least some level of
pre-existing control over files on the client (this might be
accomplished by having the server respond to a client web request
with a specially crafted file).
The fix is to disallow "setenv" to be pushed to clients from
the server, and to add a new directive "setenv-safe" which is
pushable from the server, but which appends "OPENVPN_" to the
name of each remotely set environmental variable.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@983 e7ae566f-a301-0410-adde-c780ea21d3b5
Allow plugin and push directives to have multiple
parameters specified instead of only 1 quoted
parameter.
Allow plugin and push directives to have multi-line
parameter lists, such as:
<plugin>
my-plugin.so
parm1
parm2
</plugin>
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@785 e7ae566f-a301-0410-adde-c780ea21d3b5
* Added code to make sure that the local PATH environmental
variable points to the Windows system32 directory.
* Added new --ip-win32 adaptive mode which tries 'dynamic'
and then fails over to 'netsh' if the DHCP negotiation fails.
* Made --ip-win32 adaptive the default.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@739 e7ae566f-a301-0410-adde-c780ea21d3b5
get_user_pass.
(1) Allow an additional longer prompt string
to be passed to the management interface
client, in addition to the request type
string.
(2) Allow the management interface client to
return a string, usually "ok" or "cancel"
as the third argument to "needok" command.
(3) Renamed "ok" command in management interface
to "needok".
(4) Edited management-notes.txt to reflect new
needok feature.
(5) See init.c:125 for new code example.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@694 e7ae566f-a301-0410-adde-c780ea21d3b5
