Conflicts:
acinclude.m4
config-win32.h
configure.ac
misc.c
thread.c
thread.h
- These conflicts was mainly due to feat_misc getting old
and mostly caused by the pthread clean-up patches in
feat_misc
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
The add_host_route_if_nonlocal() function is too simple to really
benefit from calling add_bypass_address() when this function is the
only caller to this function.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: Peter Stuge <peter@stuge.se>
Conflicts:
Makefile.am
openvpn.8
options.c
socket.c
ssl.c
- feat_misc is missing a lot of bugfix2.1 changes
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Tested on OpenSolaris/i386, no impact for other TARGETs.
Signed-off-by: Gert Doering <gert@greenie.muc.de>
Acked-by: Kazuyoshi Aizawa <admin2@whiteboard.ne.jp>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
The init_route() function will leave &netlist untouched for
get_special_addr() routes ("remote_host" being one of them).
netlist is on stack, contains random garbage, and netlist.len
will not be 0 - thus, random stack data is copied from
netlist.data[] until the route_list is full.
This issue has been reported several places lately:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=600166http://thread.gmane.org/gmane.network.openvpn.devel/4083https://forums.openvpn.net/viewtopic.php?f=1&t=7201&p=8168
Signed-off-by: Gert Doering <gert@greenie.muc.de>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
commands.
When only a single IP address is desired from a multi-address DNS
expansion, use the first address rather than a random selection.
Version 2.1.1l
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6291 e7ae566f-a301-0410-adde-c780ea21d3b5
to clients, including routes. Previously, all pushed options needed
to fit within a 1024 byte options string.
Remember that to make use of this feature to allow many routes to
be pushed to clients, the client config file must specify the
max-routes option, and the number of pushed routes cannot exceed
this limit. Also, both server and client must include this commit.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4991 e7ae566f-a301-0410-adde-c780ea21d3b5
file or pulled from a server) can now be configured via the new
"max-routes" directive.
Previously, the limit was set to 100 and fixed by a compile-time
constant. Now the limit is dynamic and can be modified by the
"max-routes" directive. If max-routes is not specified, the default
limit is 100.
Note that this change does not address the maximum size of the
pushed options string sent from server to client, which is still
controlled by the TLS_CHANNEL_BUF_SIZE compile-time constant.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4967 e7ae566f-a301-0410-adde-c780ea21d3b5
client will examine the routing table and determine whether (a) the
OpenVPN server is reachable via a locally connected interface, or (b)
traffic to the server must be forwarded through the default router.
Only add a special bypass route for the OpenVPN server if (b) is true.
If (a) is true, behave as if the 'local' flag is specified, and do not
add a bypass route.
The new 'autolocal' flag depends on the non-portable test_local_addr()
function in route.c, which is currently only implemented for Windows.
The 'autolocal' flag will act as a no-op on platforms that have not
yet defined a test_local_addr() function.
Increased TLS_CHANNEL_BUF_SIZE to 2048 from 1024 (this will allow for
more option content to be pushed from server to client).
Raised D_MULTI_DROPPED debug level to 4 from 3.
Version 2.1_rc16b.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4446 e7ae566f-a301-0410-adde-c780ea21d3b5
to be pushed to the client in such a way that they don't accidently
obscure critical local addresses such as the DHCP server address and
DNS server addresses.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4436 e7ae566f-a301-0410-adde-c780ea21d3b5
* Warn when ethernet bridging that the IP address of the
bridge adapter is probably not the same address that
the LAN adapter was set to previously.
* When running as a server, warn if the LAN network address is
the all-popular 192.168.[0|1].x, since this condition commonly
leads to subnet conflicts down the road.
* Primarily on the client, check for subnet conflicts between
the local LAN and the VPN subnet.
Added a 'netmask' parameter to get_default_gateway, to return
the netmask of the adapter containing the default gateway.
Only implemented on Windows so far. Other platforms will
return 255.255.255.0. Currently the netmask information is
only used to warn about subnet conflicts.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3179 e7ae566f-a301-0410-adde-c780ea21d3b5
DHCP proxy mode: Configure server mode for ethernet
bridging using a DHCP-proxy, where clients talk to the
OpenVPN server-side DHCP server to receive their IP address
allocation and DNS server addresses.
Added "--route-gateway dhcp", to enable the extraction
of the gateway address from a DHCP negotiation with the
OpenVPN server-side LAN.
Modified client.conf and server.conf to reflect new option
modes.
Incremented version to 2.1_rc9a.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3164 e7ae566f-a301-0410-adde-c780ea21d3b5
* All external programs and scripts are now called by execve() on unix and
CreateProcess on Windows.
* The system() function is no longer used.
* Argument lists for external programs and scripts are now built by the new
argv_printf function which natively outputs to string arrays (i.e.
char *argv[] lists), never truncates its output, and eliminates the security
issues inherent in formatting and parsing command lines, and dealing with
argument quoting.
* The --script-security directive has been added to offer policy controls on
OpenVPN's execution of external programs and scripts.
Also added a new plugin example (openvpn/plugin/examples/log.c) that logs
information to stdout for every plugin method called by OpenVPN.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3122 e7ae566f-a301-0410-adde-c780ea21d3b5
by allowing openvpn --mktun to be used with --user and --group
to set the UID/GID of the tun device node. Also added --iproute
option to allow an alternative command to be executed in place
of the default iproute2 command (Alon Bar-Lev).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@2639 e7ae566f-a301-0410-adde-c780ea21d3b5
Implemented AUTO_USERID using
MD5(MAC address(primary network adapter)).
Currently implemented for Linux and Windows.
Basically if ENABLE_AUTO_USERID is defined,
the --auth-user-pass option will not prompt
for username/password, but will rather generate
a unique username and blank password.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@1459 e7ae566f-a301-0410-adde-c780ea21d3b5
* Added code to make sure that the local PATH environmental
variable points to the Windows system32 directory.
* Added new --ip-win32 adaptive mode which tries 'dynamic'
and then fails over to 'netsh' if the DHCP negotiation fails.
* Made --ip-win32 adaptive the default.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@739 e7ae566f-a301-0410-adde-c780ea21d3b5
