- Add support for WPA3 + WPA3_EXT_PSK mixed mode
- Improvements in scan and connect path as per specifications along with
minor bugfixes
- When AP advertises all PSK modes (WPA, WPA2 and WPA3), make sure that
station treats it as WPA2_WPA3_PSK mixed mode.
- WIFI_REASON_NO_AP_FOUND_W_COMPATIBLE_SECURITY will be reported for the following
reasons
-- AP has PMF required but station is not configured for pmf capable/required.
-- Station has PMF required but AP is not configured for pmf capable/required.
-- The AP is using unsupported group management/pairwise ciphers
-- OWE not enabled by station for found OWE AP
-- AP RSNXE parsing failed in supplicant code
-- AP is in Independent BSS mode
- Fixes issue with connecting and discovering WEP APs
- Expsnds the reasons for trigerring a disconnect using
REASON_NO_AP_FOUND_WITH_COMPATIBLE_SECURITY
-- SAE-PK configured as compulsory in sta config but disabled for the AP
-- SAE-H2e configured as compulsory in sta config but disabled for an AP
that has authmode as WPA3-PSK or WPA3-WPA2-PSK.
-- Open AP found but we have set password or enabled enterprise mode.
1. Adds 3 more disconnect reasons in case of No AP found.
a. REASON_NO_AP_FOUND_IN_RSSI_THRESHOLD : AP rejected because it did
not meet rssi threshold.
b. REASON_NO_AP_FOUND_IN_AUTHMODE THRESHOLD : AP rejected because it
did not meet security threshold.
c. REASON_NO_AP_FOUND_WITH_COMPATIBLE_ SECURITY : AP rejected because
of incompatible security configuration. These situations include
-- bss offerring WEP, but our password is not WEP compliant,
-- Encrypted AP bss but we have set authmode but no password config set.
-- AP is open AUTH but enterprise config setup.
-- AP is Enterprise but we have setup enterprise config.
2. Resets scan duration configuration to default after scan is done or is
canceled.
3. Disarms beacon timeout timer before attempting to scan and rearms it after
scan is done or scan is cancelled.
4. Resolves observed issue with duplicate reporting of beacons/probe responses
to supplicant for the same beacon/probe response during scan.
1. optimize bin size when softap & ftm not enabled
2. change fragment threshold to 256
3. support fragment for LR mode
4. fix ampdu duration issue
5. fix rx fragment fail in Open mode.
6. Drop fragmented AMPDUs
1.bringup c3 v1.1 and sync func to c3 eco7 rom
2.support to set null&probe lifetime
3.support to adjust listen interval to dtim period
4.support tx pkt w/o wake null
5.allow to tx null0 if requtest to rx data
- Fixes issue wheere beacon timeout would get triggerred multiple times
leading to a m f probe req.
- Fix missing PMKSA flush scenarios.
- Fix wrong AID assigned to station when multiple stations try to connect
simultaneously with mixed order of auth-request and assoc-request frames.
1. fix multi antenna issue.
2. fix c6 dirty eb issue
3. fix hardware modem state consecutive times when the modem sleep type is modified during runtime
-Merges the addition of extended caps IE for assoc req, probe resp
and beacons in a single place. This ensures that there are no
duplicate Extended Caps IE in the frame. Moves the capability
indication for BTM and HT20/40 from supplicant to wifi libs.
-Fix issue with frequent disconections when scanning for only a single
channel.
-Displays error message and returns ESP_ERR_NO_SUPPORT in case of
attempt to set HT40 as bandwidth for esp32c2.
