mirror of
https://github.com/olikraus/u8g2.git
synced 2025-05-08 15:56:09 +08:00
429 lines
14 KiB
C
429 lines
14 KiB
C
/*
|
||
|
||
u8x8_d_st75161.c
|
||
|
||
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
|
||
|
||
Copyright (c) 2024, olikraus@gmail.com
|
||
All rights reserved.
|
||
|
||
Redistribution and use in source and binary forms, with or without modification,
|
||
are permitted provided that the following conditions are met:
|
||
|
||
* Redistributions of source code must retain the above copyright notice, this list
|
||
of conditions and the following disclaimer.
|
||
|
||
* Redistributions in binary form must reproduce the above copyright notice, this
|
||
list of conditions and the following disclaimer in the documentation and/or other
|
||
materials provided with the distribution.
|
||
|
||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
||
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
||
https://github.com/olikraus/u8g2/issues/2481
|
||
|
||
|
||
0x030 ext 00
|
||
0x031 ext 01
|
||
0x038 ext 10
|
||
0x039 ext 11
|
||
|
||
cad 011
|
||
|
||
|
||
normal mode:
|
||
0x00c bit format
|
||
U8X8_CA( 0xbc, 0x00 ), data scan dir
|
||
U8X8_A( 0xa6 ),
|
||
y: 0 offset
|
||
|
||
flip mode:
|
||
0x008 bit format
|
||
U8X8_CA( 0xbc, 0x03 ), data scan dir
|
||
U8X8_A( 0xa6 ),
|
||
y: 5 offset
|
||
|
||
|
||
*/
|
||
|
||
|
||
#include "u8x8.h"
|
||
|
||
|
||
/* not a real power down for the st75256... just a display off */
|
||
static const uint8_t u8x8_d_st75256_256x128_powersave0_seq[] = {
|
||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_C( 0x94 ), /* sleep out */
|
||
U8X8_DLY(10),
|
||
U8X8_C( 0xaf ), /* display on */
|
||
U8X8_END_TRANSFER(), /* disable chip */
|
||
U8X8_END() /* end of sequence */
|
||
};
|
||
|
||
static const uint8_t u8x8_d_st75256_256x128_powersave1_seq[] = {
|
||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_C( 0xae ), /* display off */
|
||
U8X8_C( 0x95 ), /* sleep in */
|
||
U8X8_END_TRANSFER(), /* disable chip */
|
||
U8X8_END() /* end of sequence */
|
||
};
|
||
|
||
/* marked as unused to avoid compiler warning, issue 1802 */
|
||
#ifdef NOT_USED
|
||
static const uint8_t u8x8_d_st75256_jlx256128_flip0_seq[] = {
|
||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_CA( 0xbc, 0x00 ), /* data scan dir */
|
||
U8X8_A( 0xa6 ), /* ??? */
|
||
|
||
//U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_C( 0x00c ), /* data format LSB top */
|
||
U8X8_END_TRANSFER(), /* disable chip */
|
||
U8X8_END() /* end of sequence */
|
||
};
|
||
|
||
static const uint8_t u8x8_d_st75256_jlx256128_flip1_seq[] = {
|
||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_CA( 0xbc, 0x03 ), /* data scan dir */
|
||
U8X8_A( 0xa6 ), /* ??? */
|
||
|
||
//U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_C( 0x008 ), /* data format MSB top */
|
||
U8X8_END_TRANSFER(), /* disable chip */
|
||
U8X8_END() /* end of sequence */
|
||
};
|
||
#endif
|
||
|
||
static const uint8_t u8x8_d_st75161_jlx160160_flip0_seq[] = {
|
||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_CA( 0xbc, 0x00 ), /* data scan dir */
|
||
U8X8_A( 0xa6 ), /* ??? */
|
||
|
||
//U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_C( 0x00c ), /* data format LSB top */
|
||
U8X8_CA( 0x0AB, 0 ), /* start line */
|
||
U8X8_END_TRANSFER(), /* disable chip */
|
||
U8X8_END() /* end of sequence */
|
||
};
|
||
|
||
static const uint8_t u8x8_d_st75161_jlx160160_flip1_seq[] = {
|
||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_CA( 0xbc, 0x03 ), /* data scan dir */
|
||
U8X8_A( 0xa6 ), /* ??? */
|
||
|
||
//U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_C( 0x008 ), /* data format MSB top */
|
||
U8X8_CA( 0x0AB, 0 ), /* start line */
|
||
U8X8_END_TRANSFER(), /* disable chip */
|
||
U8X8_END() /* end of sequence */
|
||
};
|
||
|
||
/* marked as unused to avoid compiler warning, issue 1802 */
|
||
#ifdef NOT_USED
|
||
static const uint8_t u8x8_d_st75256_jlx256160_flip0_seq[] = {
|
||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_CA( 0xbc, 0x00 ), /* data scan dir */
|
||
U8X8_A( 0xa6 ), /* ??? */
|
||
|
||
//U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_C( 0x00c ), /* data format LSB top */
|
||
U8X8_END_TRANSFER(), /* disable chip */
|
||
U8X8_END() /* end of sequence */
|
||
};
|
||
|
||
static const uint8_t u8x8_d_st75256_jlx256160_flip1_seq[] = {
|
||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_CA( 0xbc, 0x03 ), /* data scan dir */
|
||
U8X8_A( 0xa6 ), /* ??? */
|
||
|
||
//U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_C( 0x008 ), /* data format MSB top */
|
||
U8X8_END_TRANSFER(), /* disable chip */
|
||
U8X8_END() /* end of sequence */
|
||
};
|
||
#endif
|
||
|
||
|
||
/*=============================================*/
|
||
/* jlx160160 https://github.com/olikraus/u8g2/issues/1642 */
|
||
|
||
static const u8x8_display_info_t u8x8_st75161_jlx160160_display_info =
|
||
{
|
||
/* chip_enable_level = */ 0,
|
||
/* chip_disable_level = */ 1,
|
||
|
||
/* post_chip_enable_wait_ns = */ 20,
|
||
/* pre_chip_disable_wait_ns = */ 20,
|
||
/* reset_pulse_width_ms = */ 5,
|
||
/* post_reset_wait_ms = */ 5, /**/
|
||
/* sda_setup_time_ns = */ 20, /* */
|
||
/* sck_pulse_width_ns = */ 40, /* */
|
||
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
||
/* spi_mode = */ 0, /* active high, rising edge */
|
||
/* i2c_bus_clock_100kHz = */ 4, /* 400KHz */
|
||
/* data_setup_time_ns = */ 15,
|
||
/* write_pulse_width_ns = */ 70,
|
||
/* tile_width = */ 20,
|
||
/* tile_height = */ 20,
|
||
/* default_x_offset = */ 0, /* y (!) offset in flipmode 0 */
|
||
/* flipmode_x_offset = */ 1, /* y (!) offset in flipmode 0 */
|
||
/* pixel_width = */ 160,
|
||
/* pixel_height = */ 160
|
||
};
|
||
|
||
|
||
/*
|
||
from the JLX160160 datasheet:
|
||
|
||
transfer_command_lcd(0x30);//EXT=0
|
||
transfer_command_lcd(0x94);//Sleep out
|
||
transfer_command_lcd(0x31);//EXT=1
|
||
transfer_command_lcd(0xD7);//Autoread disable
|
||
transfer_data_lcd(0X9F);//
|
||
transfer_command_lcd(0x32);//Analog SET
|
||
transfer_data_lcd(0x00);//OSC Frequency adjustment
|
||
transfer_data_lcd(0x01);//Frequency on booster capacitors->6KHz
|
||
transfer_data_lcd(0x00);//Bias=1/14
|
||
transfer_command_lcd(0x20);// Gray Level
|
||
transfer_data_lcd(0x01);
|
||
transfer_data_lcd(0x03);
|
||
transfer_data_lcd(0x05);
|
||
transfer_data_lcd(0x07);
|
||
transfer_data_lcd(0x09);
|
||
transfer_data_lcd(0x0b);
|
||
transfer_data_lcd(0x0d);
|
||
transfer_data_lcd(0x10);
|
||
transfer_data_lcd(0x11);
|
||
transfer_data_lcd(0x13);
|
||
transfer_data_lcd(0x15);
|
||
transfer_data_lcd(0x17);
|
||
transfer_data_lcd(0x19);
|
||
transfer_data_lcd(0x1b);
|
||
transfer_data_lcd(0x1d);
|
||
transfer_data_lcd(0x1f);
|
||
transfer_command_lcd(0x31);//EXT=1
|
||
transfer_command_lcd(0xf0);//Without this instruction, the voltage will be increased slowly. 0.5s
|
||
transfer_data_lcd(0x0f);
|
||
transfer_data_lcd(0x0f);
|
||
transfer_data_lcd(0x0f);
|
||
transfer_data_lcd(0x0f);
|
||
transfer_command_lcd(0x30);//EXT=0
|
||
transfer_command_lcd(0x75);//Page Address setting
|
||
transfer_data_lcd(0X00);// XS=0
|
||
transfer_data_lcd(0X28);// XE=159 0x28
|
||
transfer_command_lcd(0x15);//Clumn Address setting
|
||
transfer_data_lcd(0X00);// XS=0
|
||
transfer_data_lcd(0Xff);// XE=256
|
||
transfer_command_lcd(0xBC);//Data scan direction
|
||
transfer_data_lcd(0x00);//MX.MY=Normal
|
||
transfer_ command_lcd (0xA6);
|
||
transfer_command_lcd(0xCA);//Display Control
|
||
transfer_data_lcd(0X00);//
|
||
transfer_data_lcd(0X9F);//Duty=160
|
||
transfer_data_lcd(0X20);//Nline=off
|
||
transfer_command_lcd(0xF0);//Display Mode
|
||
transfer_data_lcd(0X10);//10=Monochrome Mode,11=4Gray
|
||
transfer_command_lcd(0x81);//EV control
|
||
transfer_data_lcd(0x1d);//Fine-tune the contrast value, 0x00～0x3f
|
||
transfer_data_lcd(0x04);//Coarse contrast adjustment 0x00～0x07
|
||
transfer_command_lcd(0x20);//Power control
|
||
transfer_data_lcd(0x0B);//D0=regulator ; D1=follower ; D3=booste,
|
||
on:1 off:0
|
||
delay(20);
|
||
transfer_command_lcd(0xAF); //Display on
|
||
|
||
*/
|
||
|
||
static const uint8_t u8x8_d_st75161_jlx160160_init_seq[] = {
|
||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
|
||
U8X8_DLY(20),
|
||
|
||
/*
|
||
U8X8_C( 0x030 ), // Extension Command 1
|
||
U8X8_C( 0x06E ),
|
||
|
||
U8X8_C( 0x031 ), // Extension Command 2
|
||
U8X8_CA( 0x0d7, 0x09f), // Set auto-read instruction, Disable Auto Read
|
||
|
||
U8X8_CA( 0x0e0 ,0x000), // Enable OTP Read
|
||
U8X8_DLY(10),
|
||
|
||
U8X8_C( 0x0e3 ), // OTP Read
|
||
U8X8_DLY(20),
|
||
U8X8_C(0xe1), // OTP Control Out
|
||
*/
|
||
|
||
|
||
|
||
|
||
U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_C( 0x094 ), /* sleep out */
|
||
|
||
//U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_C( 0x0ae ), /* display off */
|
||
|
||
U8X8_C( 0x031 ), /* select 01 commands */
|
||
U8X8_CA( 0x0d7, 0x09f ), /* disable auto read */
|
||
|
||
//U8X8_C( 0x031 ), /* select 01 commands */
|
||
U8X8_C( 0x032 ), /* analog circuit set */
|
||
U8X8_A( 0x000 ), /* code example: OSC Frequency adjustment */
|
||
U8X8_A( 0x001 ), /* Frequency on booster capacitors 1 = 6KHz? */
|
||
U8X8_A( 0x000 ), /* Bias: 0: 1/14, 1: 1/13, 2: 1/12, 3: 1/11, 4:1/10, 5:1/9 */
|
||
|
||
U8X8_C( 0x031 ), /* select 01 commands */
|
||
U8X8_C( 0x020 ), /* gray levels */
|
||
U8X8_A( 0x01 ),
|
||
U8X8_A( 0x03 ),
|
||
U8X8_A( 0x05 ),
|
||
U8X8_A( 0x07 ),
|
||
U8X8_A( 0x09),
|
||
U8X8_A( 0x0b ),
|
||
U8X8_A( 0x0d ),
|
||
U8X8_A( 0x10 ),
|
||
U8X8_A( 0x11 ),
|
||
U8X8_A( 0x13 ),
|
||
U8X8_A( 0x15 ),
|
||
U8X8_A( 0x17 ),
|
||
U8X8_A( 0x19 ),
|
||
U8X8_A( 0x1b ),
|
||
U8X8_A( 0x1d ),
|
||
U8X8_A( 0x1f ),
|
||
|
||
|
||
U8X8_C( 0x031 ), /* select 01 commands */
|
||
U8X8_CA(0x51, 0xfb), // Booster Level x10
|
||
U8X8_CAAAA(0xf0, 15, 15, 15, 15), /* Frame Rate Temparature Range */
|
||
|
||
|
||
U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_CAA(0x75, 0, 0x28), /* row range 0..159*/
|
||
U8X8_CAA(0x15, 0, 255), /* col range */
|
||
|
||
//U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_CA( 0xbc, 0x00 ), /* data scan dir */
|
||
U8X8_A( 0xa6 ), /* ??? */
|
||
|
||
//U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_C( 0x00c ), /* data format LSB top */
|
||
|
||
//U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_C( 0xca ), /* display control, 3 args follow */
|
||
U8X8_A( 0x00 ), /* 0x00: no clock division, 0x04: devide clock */
|
||
U8X8_A( 0x9f ), /* 1/160 duty */
|
||
U8X8_A( 0x20 ), /* nline off */
|
||
|
||
//U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_CA( 0x0f0, 0x010 ), /* monochrome mode = 0x010, graylevel = 0x011*/
|
||
|
||
//U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_CAA( 0x81, 0x1d, 0x04 ), /* Volume control */
|
||
|
||
//U8X8_C( 0x030 ), /* select 00 commands */
|
||
U8X8_CA( 0x020, 0x00b ), /* Power control: Regulator, follower & booster on */
|
||
U8X8_DLY(100),
|
||
|
||
//U8X8_C( 0xaf ),
|
||
U8X8_END_TRANSFER(), /* disable chip */
|
||
U8X8_END() /* end of sequence */
|
||
};
|
||
|
||
|
||
uint8_t u8x8_d_st75161_jlx160160(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||
{
|
||
uint8_t x, c;
|
||
uint8_t *ptr;
|
||
|
||
switch(msg)
|
||
{
|
||
case U8X8_MSG_DISPLAY_DRAW_TILE:
|
||
|
||
u8x8_cad_StartTransfer(u8x8);
|
||
x = ((u8x8_tile_t *)arg_ptr)->x_pos;
|
||
x *= 8;
|
||
|
||
u8x8_cad_SendCmd(u8x8, 0x030 ); /* select command set */
|
||
u8x8_cad_SendCmd(u8x8, 0x075 ); /* row */
|
||
u8x8_cad_SendArg(u8x8, (((u8x8_tile_t *)arg_ptr)->y_pos+u8x8->x_offset)); // x offset is reused as y offset
|
||
|
||
u8x8_cad_SendArg(u8x8, 0x027);
|
||
u8x8_cad_SendCmd(u8x8, 0x015 ); /* col */
|
||
u8x8_cad_SendArg(u8x8, x);
|
||
u8x8_cad_SendArg(u8x8, 0x9f);
|
||
u8x8_cad_SendCmd(u8x8, 0x05c );
|
||
|
||
do
|
||
{
|
||
c = ((u8x8_tile_t *)arg_ptr)->cnt;
|
||
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
|
||
c *= 8;
|
||
u8x8_cad_SendData(u8x8, c, ptr);
|
||
arg_int--;
|
||
} while( arg_int > 0 );
|
||
|
||
u8x8_cad_EndTransfer(u8x8);
|
||
return 1;
|
||
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||
//u8x8_SetI2CAddress(u8x8, 0x078); /* lowest I2C adr of the ST75161 */
|
||
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_st75161_jlx160160_display_info);
|
||
return 1;
|
||
case U8X8_MSG_DISPLAY_INIT:
|
||
u8x8_d_helper_display_init(u8x8);
|
||
u8x8_cad_SendSequence(u8x8, u8x8_d_st75161_jlx160160_init_seq);
|
||
return 1;
|
||
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
|
||
if ( arg_int == 0 )
|
||
u8x8_cad_SendSequence(u8x8, u8x8_d_st75256_256x128_powersave0_seq);
|
||
else
|
||
u8x8_cad_SendSequence(u8x8, u8x8_d_st75256_256x128_powersave1_seq);
|
||
|
||
return 1;
|
||
case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
|
||
if ( arg_int == 0 )
|
||
{
|
||
u8x8_cad_SendSequence(u8x8, u8x8_d_st75161_jlx160160_flip0_seq);
|
||
u8x8->x_offset = u8x8->display_info->default_x_offset;
|
||
}
|
||
else
|
||
{
|
||
u8x8_cad_SendSequence(u8x8, u8x8_d_st75161_jlx160160_flip1_seq);
|
||
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
|
||
}
|
||
return 1;
|
||
|
||
#ifdef U8X8_WITH_SET_CONTRAST
|
||
case U8X8_MSG_DISPLAY_SET_CONTRAST:
|
||
u8x8_cad_StartTransfer(u8x8);
|
||
|
||
u8x8_cad_SendCmd(u8x8, 0x030 );
|
||
u8x8_cad_SendCmd(u8x8, 0x081 ); /* there are 9 bit for the volume control */
|
||
u8x8_cad_SendArg(u8x8, (arg_int & 0x1f)<<1 ); /* lower 6 bit */
|
||
u8x8_cad_SendArg(u8x8, (arg_int>>5)); /* upper 3 bit */
|
||
|
||
u8x8_cad_EndTransfer(u8x8);
|
||
return 1;
|
||
#endif
|
||
}
|
||
return 0;
|
||
}
|
||
|