mirror of
https://git.rtems.org/rtems-docs/
synced 2025-07-23 04:16:07 +08:00
user: Split the ARM BSPs source into separate files.
This commit is contained in:
Chris Johns
parent
a1d63745d9
commit
248c7089b9
83
user/bsps/arm/altera-cyclone-v.rst
Normal file
83
user/bsps/arm/altera-cyclone-v.rst
Normal file
@ -0,0 +1,83 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2017, 2019 embedded brains GmbH
|
||||
.. Copyright (C) 2017, 2019 Sebastian Huber
|
||||
|
||||
altera-cyclone-v (Intel Cyclone V)
|
||||
==================================
|
||||
|
||||
This BSP offers only one variant, the `altcycv_devkit`. This variant supports
|
||||
the Intel Cyclone V system on chip. The basic hardware initialization is not
|
||||
performed by the BSP. A boot loader with device tree support must be used to
|
||||
start the BSP, e.g. U-Boot.
|
||||
|
||||
The BSP is known to run on these boards:
|
||||
|
||||
* `Cyclone V SoC Development Kit <https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/kit-cyclone-v-soc.html>`_
|
||||
|
||||
* `Enclustra Mars MA3 SoC Module <https://www.enclustra.com/en/products/system-on-chip-modules/mars-ma3/>`_
|
||||
|
||||
* `Terasic DE10-Standard Development Kit <https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=165&No=1081>`_
|
||||
|
||||
Boot via U-Boot
|
||||
---------------
|
||||
|
||||
The application executable file (ELF file) must be converted to an U-Boot
|
||||
image. Use the following commands:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
arm-rtems5-objcopy -O binary app.exe app.bin
|
||||
gzip -9 -f -c app.bin > app.bin.gz
|
||||
mkimage -A arm -O linux -T kernel -a 0x00300000 -e 0x00300000 -n RTEMS -d app.bin.gz app.img
|
||||
|
||||
Use the following U-Boot commands to boot an application via TFTP download:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
tftpboot ${loadaddr} app.img && run loadfdt && bootm ${loadaddr} - ${fdt_addr} ; reset
|
||||
|
||||
The ``loadfdt`` command may be not defined in your U-Boot environment. Just
|
||||
replace it with the appropriate commands to load the device tree at
|
||||
``${fdt_addr}``.
|
||||
|
||||
Clock Driver
|
||||
------------
|
||||
|
||||
The clock driver uses the `Cortex-A9 MPCore Global Timer`.
|
||||
|
||||
Console Driver
|
||||
--------------
|
||||
|
||||
The console driver supports up to two on-chip NS16550 UARTs. The console
|
||||
driver does not configure the pins.
|
||||
|
||||
I2C Driver
|
||||
----------
|
||||
|
||||
There is a legacy I2C driver. It should be converted to the I2C driver framework.
|
||||
|
||||
Network Interface Driver
|
||||
------------------------
|
||||
|
||||
The network interface driver is provided by the `libbsd`. It is initialized
|
||||
according to the device tree. It supports checksum offload.
|
||||
|
||||
MMC/SDCard Driver
|
||||
-----------------
|
||||
|
||||
The MMC/SDCard driver is provided by the `libbsd`. It is
|
||||
initialized according to the device tree. Pin re-configuration according to
|
||||
the serial clock frequency is not supported. DMA transfers are supported.
|
||||
|
||||
USB Host Driver
|
||||
---------------
|
||||
|
||||
The USB host driver is provided by the `libbsd`. It is initialized according
|
||||
to the device tree. The driver works in polled mode.
|
||||
|
||||
Caveats
|
||||
-------
|
||||
|
||||
The clock and pin configuration support is quite rudimentary and mostly relies
|
||||
on the boot loader.
|
||||
8
user/bsps/arm/atsam.rst
Normal file
8
user/bsps/arm/atsam.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
atsam
|
||||
=====
|
||||
|
||||
TODO.
|
||||
8
user/bsps/arm/beagle.rst
Normal file
8
user/bsps/arm/beagle.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
beagle
|
||||
======
|
||||
|
||||
TODO.
|
||||
8
user/bsps/arm/bsp-csb337.rst
Normal file
8
user/bsps/arm/bsp-csb337.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
csb337
|
||||
======
|
||||
|
||||
TODO.
|
||||
8
user/bsps/arm/bsp-stm32f4.rst
Normal file
8
user/bsps/arm/bsp-stm32f4.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
stm32f4
|
||||
=======
|
||||
|
||||
TODO.
|
||||
8
user/bsps/arm/csb336.rst
Normal file
8
user/bsps/arm/csb336.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
csb336
|
||||
======
|
||||
|
||||
TODO.
|
||||
8
user/bsps/arm/edb7312.rst
Normal file
8
user/bsps/arm/edb7312.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
edb7312
|
||||
=======
|
||||
|
||||
TODO.
|
||||
8
user/bsps/arm/gdbarmsim.rst
Normal file
8
user/bsps/arm/gdbarmsim.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
gdbarmsim
|
||||
=========
|
||||
|
||||
TODO.
|
||||
8
user/bsps/arm/gumstix.rst
Normal file
8
user/bsps/arm/gumstix.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
gumstix
|
||||
=======
|
||||
|
||||
TODO.
|
||||
149
user/bsps/arm/imx.rst
Normal file
149
user/bsps/arm/imx.rst
Normal file
@ -0,0 +1,149 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2017, 2019 embedded brains GmbH
|
||||
.. Copyright (C) 2017, 2019 Sebastian Huber
|
||||
|
||||
imx (NXP i.MX)
|
||||
==============
|
||||
|
||||
This BSP offers only one variant, the `imx7`. This variant supports the i.MX
|
||||
7Dual processor. The basic hardware initialization is not performed by the
|
||||
BSP. A boot loader with device tree support must be used to start the BSP,
|
||||
e.g. U-Boot.
|
||||
|
||||
Build Configuration Options
|
||||
---------------------------
|
||||
|
||||
The following options are available at the configure command line.
|
||||
|
||||
``BSP_PRESS_KEY_FOR_RESET``
|
||||
If defined to a non-zero value, then print a message and wait until pressed
|
||||
before resetting board when application terminates.
|
||||
|
||||
``BSP_RESET_BOARD_AT_EXIT``
|
||||
If defined to a non-zero value, then reset the board when the application
|
||||
terminates.
|
||||
|
||||
``BSP_PRINT_EXCEPTION_CONTEXT``
|
||||
If defined to a non-zero value, then print the exception context when an
|
||||
unexpected exception occurs.
|
||||
|
||||
``BSP_FDT_BLOB_SIZE_MAX``
|
||||
The maximum size of the device tree blob in bytes (default is 262144).
|
||||
|
||||
``CONSOLE_USE_INTERRUPTS``
|
||||
Use interrupt driven mode for console devices (enabled by default).
|
||||
|
||||
``IMX_CCM_IPG_HZ``
|
||||
The IPG clock frequency in Hz (default is 67500000).
|
||||
|
||||
``IMX_CCM_UART_HZ``
|
||||
The UART clock frequency in Hz (default is 24000000).
|
||||
|
||||
``IMX_CCM_AHB_HZ``
|
||||
The AHB clock frequency in Hz (default is 135000000).
|
||||
|
||||
Boot via U-Boot
|
||||
---------------
|
||||
|
||||
The application executable file (ELF file) must be converted to an U-Boot
|
||||
image. Use the following commands:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
arm-rtems5-objcopy -O binary app.exe app.bin
|
||||
gzip -9 -f -c app.bin > app.bin.gz
|
||||
mkimage -A arm -O linux -T kernel -a 0x80200000 -e 0x80200000 -n RTEMS -d app.bin.gz app.img
|
||||
|
||||
Use the following U-Boot commands to boot an application via TFTP download:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
tftpboot ${loadaddr} app.img && run loadfdt && bootm ${loadaddr} - ${fdt_addr} ; reset
|
||||
|
||||
The ``loadfdt`` command may be not defined in your U-Boot environment. Just
|
||||
replace it with the appropriate commands to load the device tree at
|
||||
``${fdt_addr}``.
|
||||
|
||||
Clock Driver
|
||||
------------
|
||||
|
||||
The clock driver uses the `ARMv7-AR Generic Timer`.
|
||||
|
||||
Console Driver
|
||||
--------------
|
||||
|
||||
The console driver supports up to seven on-chip UARTs. They are initialized
|
||||
according to the device tree. The console driver does not configure the pins.
|
||||
|
||||
I2C Driver
|
||||
----------
|
||||
|
||||
I2C drivers are registered by the ``i2c_bus_register_imx()`` function. The I2C
|
||||
driver does not configure the pins.
|
||||
|
||||
.. code-block:: c
|
||||
|
||||
#include <assert.h>
|
||||
#include <bsp.h>
|
||||
|
||||
void i2c_init(void)
|
||||
{
|
||||
int rv;
|
||||
|
||||
rv = i2c_bus_register_imx("/dev/i2c-0", "i2c0");
|
||||
assert(rv == 0);
|
||||
}
|
||||
|
||||
SPI Driver
|
||||
----------
|
||||
|
||||
SPI drivers are registered by the ``spi_bus_register_imx()`` function. The SPI
|
||||
driver configures the pins according to the ``pinctrl-0`` device tree property.
|
||||
SPI transfers with a continuous chip select are limited by the FIFO size of 64
|
||||
bytes. The driver has no DMA support.
|
||||
|
||||
.. code-block:: c
|
||||
|
||||
#include <assert.h>
|
||||
#include <bsp.h>
|
||||
|
||||
void spi_init(void)
|
||||
{
|
||||
int rv;
|
||||
|
||||
rv = spi_bus_register_imx("/dev/spi-0", "spi0");
|
||||
assert(rv == 0);
|
||||
}
|
||||
|
||||
Network Interface Driver
|
||||
------------------------
|
||||
|
||||
The network interface driver is provided by the `libbsd`. It is initialized
|
||||
according to the device tree. It supports checksum offload and interrupt
|
||||
coalescing. IPv6 transmit checksum offload is not implemented. The interrupt
|
||||
coalescing uses the MII/GMII clocks and can be controlled by the following
|
||||
system controls:
|
||||
|
||||
* ``dev.ffec.<unit>.int_coal.rx_time``
|
||||
* ``dev.ffec.<unit>.int_coal.rx_count``
|
||||
* ``dev.ffec.<unit>.int_coal.tx_time``
|
||||
* ``dev.ffec.<unit>.int_coal.tx_count``
|
||||
|
||||
A value of zero for the time or count disables the interrupt coalescing in the
|
||||
corresponding direction.
|
||||
|
||||
MMC/SDCard Driver
|
||||
-----------------
|
||||
|
||||
The MMC/SDCard driver (uSDHC module) is provided by the `libbsd`. It is
|
||||
initialized according to the device tree. Pin re-configuration according to
|
||||
the serial clock frequency is not supported. Data transfers are extremely
|
||||
slow. This is probably due to the missing DMA support.
|
||||
|
||||
Caveats
|
||||
-------
|
||||
|
||||
The clock and pin configuration support is quite rudimentary and mostly relies
|
||||
on the boot loader. For a pin group configuration see
|
||||
``imx_iomux_configure_pins()``. There is no power management support.
|
||||
8
user/bsps/arm/lm3s69xx.rst
Normal file
8
user/bsps/arm/lm3s69xx.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
lm3s69xx
|
||||
========
|
||||
|
||||
TODO.
|
||||
8
user/bsps/arm/lpc176x.rst
Normal file
8
user/bsps/arm/lpc176x.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
lpc176x
|
||||
=======
|
||||
|
||||
TODO.
|
||||
78
user/bsps/arm/lpc24xx.rst
Normal file
78
user/bsps/arm/lpc24xx.rst
Normal file
@ -0,0 +1,78 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2017, 2019 embedded brains GmbH
|
||||
.. Copyright (C) 2017, 2019 Sebastian Huber
|
||||
|
||||
lpc24xx (NXP LPC17XX/LPC24XX/LPC40XX)
|
||||
=====================================
|
||||
|
||||
This BSP offers only several variants. The following variants support the
|
||||
`Embedded Artits LPC4088 Developer's Kit <https://www.embeddedartists.com/products/lpc4088-developers-kit/>`_
|
||||
and earlier board generations:
|
||||
|
||||
* lpc17xx_ea_ram
|
||||
|
||||
* lpc17xx_ea_rom_int
|
||||
|
||||
* lpc24xx_ea
|
||||
|
||||
* lpc40xx_ea_ram
|
||||
|
||||
* lpc40xx_ea_rom_int
|
||||
|
||||
They can be used as a base line for customization. The basic hardware
|
||||
initialization is performed by the BSP. It can be customized via configuration
|
||||
options and configuration tables. See also
|
||||
`<bsp/start-config.h> <https://git.rtems.org/rtems/tree/bsps/arm/lpc24xx/include/bsp/start-config.h>`_.
|
||||
|
||||
Clock Driver
|
||||
------------
|
||||
|
||||
The clock driver of the Cortex-M variants uses the `ARMv7-M Systick`. The
|
||||
older ARM7TDMI variants use the `TMR0` timer module.
|
||||
|
||||
Console Driver
|
||||
--------------
|
||||
|
||||
The console driver supports up to four on-chip UARTs. Initialization can be
|
||||
customized via the ``lpc24xx_uart_probe_1()``, ``lpc24xx_uart_probe_2()`` and
|
||||
``lpc24xx_uart_probe_3()`` functions.
|
||||
|
||||
I2C Bus Driver
|
||||
--------------
|
||||
|
||||
I2C bus drivers are registered by the ``lpc24xx_register_i2c_0()``,
|
||||
``lpc24xx_register_i2c_1()`` and ``lpc24xx_register_i2c_2()`` functions. The
|
||||
I2C driver does not configure the pins. See also
|
||||
`<bsp/i2c.h> <https://git.rtems.org/rtems/tree/bsps/arm/lpc24xx/include/bsp/i2c.h>`_.
|
||||
|
||||
SPI Bus Driver
|
||||
--------------
|
||||
|
||||
SPI bus drivers are registered by the ``lpc24xx_register_ssp_0()``,
|
||||
``lpc24xx_register_ssp_1()`` and ``lpc24xx_register_ssp_2()`` functions. The
|
||||
SSP driver does not configure the pins. See also
|
||||
`<bsp/ssp.h> <https://git.rtems.org/rtems/tree/bsps/arm/lpc24xx/include/bsp/ssp.h>`_.
|
||||
|
||||
Network Interface Driver
|
||||
------------------------
|
||||
|
||||
Only a legacy network driver is support. For a `libbsd` base driver the
|
||||
platform support is missing, see
|
||||
`if_lpe.c <https://git.rtems.org/rtems-libbsd/tree/rtemsbsd/sys/arm/lpc/if_lpe.c>`_.
|
||||
|
||||
USB Driver
|
||||
----------
|
||||
|
||||
The USB host driver (OHCI) is provided by the `libbsd`.
|
||||
|
||||
Framebuffer Driver
|
||||
------------------
|
||||
|
||||
For a custom framebuffer driver see
|
||||
`<bsp/lcd.h> <https://git.rtems.org/rtems/tree/bsps/arm/lpc24xx/include/bsp/lcd.h>`_.
|
||||
|
||||
RTC Driver
|
||||
----------
|
||||
|
||||
There is a standard RTC driver available using the on-chip RTC module.
|
||||
8
user/bsps/arm/raspberrypi.rst
Normal file
8
user/bsps/arm/raspberrypi.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
raspberrypi
|
||||
===========
|
||||
|
||||
TODO.
|
||||
8
user/bsps/arm/realview-pbx-a9.rst
Normal file
8
user/bsps/arm/realview-pbx-a9.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
realview-pbx-a9
|
||||
===============
|
||||
|
||||
TODO.
|
||||
8
user/bsps/arm/rtl22xx.rst
Normal file
8
user/bsps/arm/rtl22xx.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
rtl22xx
|
||||
=======
|
||||
|
||||
TODO.
|
||||
8
user/bsps/arm/smdk2410.rst
Normal file
8
user/bsps/arm/smdk2410.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
smdk2410
|
||||
========
|
||||
|
||||
TODO.
|
||||
8
user/bsps/arm/tms570.rst
Normal file
8
user/bsps/arm/tms570.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
tms570
|
||||
======
|
||||
|
||||
TODO.
|
||||
8
user/bsps/arm/xilinx-zynq.rst
Normal file
8
user/bsps/arm/xilinx-zynq.rst
Normal file
@ -0,0 +1,8 @@
|
||||
.. SPDX-License-Identifier: CC-BY-SA-4.0
|
||||
|
||||
.. Copyright (C) 2019 TBD
|
||||
|
||||
xilinx-zynq
|
||||
===========
|
||||
|
||||
TODO.
|
||||
@ -6,385 +6,23 @@
|
||||
arm (ARM)
|
||||
*********
|
||||
|
||||
altera-cyclone-v (Intel Cyclone V)
|
||||
==================================
|
||||
|
||||
This BSP offers only one variant, the `altcycv_devkit`. This variant supports
|
||||
the Intel Cyclone V system on chip. The basic hardware initialization is not
|
||||
performed by the BSP. A boot loader with device tree support must be used to
|
||||
start the BSP, e.g. U-Boot.
|
||||
|
||||
The BSP is known to run on these boards:
|
||||
|
||||
* `Cyclone V SoC Development Kit <https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/kit-cyclone-v-soc.html>`_
|
||||
|
||||
* `Enclustra Mars MA3 SoC Module <https://www.enclustra.com/en/products/system-on-chip-modules/mars-ma3/>`_
|
||||
|
||||
* `Terasic DE10-Standard Development Kit <https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=165&No=1081>`_
|
||||
|
||||
Boot via U-Boot
|
||||
---------------
|
||||
|
||||
The application executable file (ELF file) must be converted to an U-Boot
|
||||
image. Use the following commands:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
arm-rtems5-objcopy -O binary app.exe app.bin
|
||||
gzip -9 -f -c app.bin > app.bin.gz
|
||||
mkimage -A arm -O linux -T kernel -a 0x00300000 -e 0x00300000 -n RTEMS -d app.bin.gz app.img
|
||||
|
||||
Use the following U-Boot commands to boot an application via TFTP download:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
tftpboot ${loadaddr} app.img && run loadfdt && bootm ${loadaddr} - ${fdt_addr} ; reset
|
||||
|
||||
The ``loadfdt`` command may be not defined in your U-Boot environment. Just
|
||||
replace it with the appropriate commands to load the device tree at
|
||||
``${fdt_addr}``.
|
||||
|
||||
Clock Driver
|
||||
------------
|
||||
|
||||
The clock driver uses the `Cortex-A9 MPCore Global Timer`.
|
||||
|
||||
Console Driver
|
||||
--------------
|
||||
|
||||
The console driver supports up to two on-chip NS16550 UARTs. The console
|
||||
driver does not configure the pins.
|
||||
|
||||
I2C Driver
|
||||
----------
|
||||
|
||||
There is a legacy I2C driver. It should be converted to the I2C driver framework.
|
||||
|
||||
Network Interface Driver
|
||||
------------------------
|
||||
|
||||
The network interface driver is provided by the `libbsd`. It is initialized
|
||||
according to the device tree. It supports checksum offload.
|
||||
|
||||
MMC/SDCard Driver
|
||||
-----------------
|
||||
|
||||
The MMC/SDCard driver is provided by the `libbsd`. It is
|
||||
initialized according to the device tree. Pin re-configuration according to
|
||||
the serial clock frequency is not supported. DMA transfers are supported.
|
||||
|
||||
USB Host Driver
|
||||
---------------
|
||||
|
||||
The USB host driver is provided by the `libbsd`. It is initialized according
|
||||
to the device tree. The driver works in polled mode.
|
||||
|
||||
Caveats
|
||||
-------
|
||||
|
||||
The clock and pin configuration support is quite rudimentary and mostly relies
|
||||
on the boot loader.
|
||||
|
||||
atsam
|
||||
=====
|
||||
|
||||
TODO.
|
||||
|
||||
beagle
|
||||
======
|
||||
|
||||
TODO.
|
||||
|
||||
csb336
|
||||
======
|
||||
|
||||
TODO.
|
||||
|
||||
csb337
|
||||
======
|
||||
|
||||
TODO.
|
||||
|
||||
edb7312
|
||||
=======
|
||||
|
||||
TODO.
|
||||
|
||||
gdbarmsim
|
||||
=========
|
||||
|
||||
TODO.
|
||||
|
||||
gumstix
|
||||
=======
|
||||
|
||||
TODO.
|
||||
|
||||
imx (NXP i.MX)
|
||||
==============
|
||||
|
||||
This BSP offers only one variant, the `imx7`. This variant supports the i.MX
|
||||
7Dual processor. The basic hardware initialization is not performed by the
|
||||
BSP. A boot loader with device tree support must be used to start the BSP,
|
||||
e.g. U-Boot.
|
||||
|
||||
Build Configuration Options
|
||||
---------------------------
|
||||
|
||||
The following options are available at the configure command line.
|
||||
|
||||
``BSP_PRESS_KEY_FOR_RESET``
|
||||
If defined to a non-zero value, then print a message and wait until pressed
|
||||
before resetting board when application terminates.
|
||||
|
||||
``BSP_RESET_BOARD_AT_EXIT``
|
||||
If defined to a non-zero value, then reset the board when the application
|
||||
terminates.
|
||||
|
||||
``BSP_PRINT_EXCEPTION_CONTEXT``
|
||||
If defined to a non-zero value, then print the exception context when an
|
||||
unexpected exception occurs.
|
||||
|
||||
``BSP_FDT_BLOB_SIZE_MAX``
|
||||
The maximum size of the device tree blob in bytes (default is 262144).
|
||||
|
||||
``CONSOLE_USE_INTERRUPTS``
|
||||
Use interrupt driven mode for console devices (enabled by default).
|
||||
|
||||
``IMX_CCM_IPG_HZ``
|
||||
The IPG clock frequency in Hz (default is 67500000).
|
||||
|
||||
``IMX_CCM_UART_HZ``
|
||||
The UART clock frequency in Hz (default is 24000000).
|
||||
|
||||
``IMX_CCM_AHB_HZ``
|
||||
The AHB clock frequency in Hz (default is 135000000).
|
||||
|
||||
Boot via U-Boot
|
||||
---------------
|
||||
|
||||
The application executable file (ELF file) must be converted to an U-Boot
|
||||
image. Use the following commands:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
arm-rtems5-objcopy -O binary app.exe app.bin
|
||||
gzip -9 -f -c app.bin > app.bin.gz
|
||||
mkimage -A arm -O linux -T kernel -a 0x80200000 -e 0x80200000 -n RTEMS -d app.bin.gz app.img
|
||||
|
||||
Use the following U-Boot commands to boot an application via TFTP download:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
tftpboot ${loadaddr} app.img && run loadfdt && bootm ${loadaddr} - ${fdt_addr} ; reset
|
||||
|
||||
The ``loadfdt`` command may be not defined in your U-Boot environment. Just
|
||||
replace it with the appropriate commands to load the device tree at
|
||||
``${fdt_addr}``.
|
||||
|
||||
Clock Driver
|
||||
------------
|
||||
|
||||
The clock driver uses the `ARMv7-AR Generic Timer`.
|
||||
|
||||
Console Driver
|
||||
--------------
|
||||
|
||||
The console driver supports up to seven on-chip UARTs. They are initialized
|
||||
according to the device tree. The console driver does not configure the pins.
|
||||
|
||||
I2C Driver
|
||||
----------
|
||||
|
||||
I2C drivers are registered by the ``i2c_bus_register_imx()`` function. The I2C
|
||||
driver does not configure the pins.
|
||||
|
||||
.. code-block:: c
|
||||
|
||||
#include <assert.h>
|
||||
#include <bsp.h>
|
||||
|
||||
void i2c_init(void)
|
||||
{
|
||||
int rv;
|
||||
|
||||
rv = i2c_bus_register_imx("/dev/i2c-0", "i2c0");
|
||||
assert(rv == 0);
|
||||
}
|
||||
|
||||
SPI Driver
|
||||
----------
|
||||
|
||||
SPI drivers are registered by the ``spi_bus_register_imx()`` function. The SPI
|
||||
driver configures the pins according to the ``pinctrl-0`` device tree property.
|
||||
SPI transfers with a continuous chip select are limited by the FIFO size of 64
|
||||
bytes. The driver has no DMA support.
|
||||
|
||||
.. code-block:: c
|
||||
|
||||
#include <assert.h>
|
||||
#include <bsp.h>
|
||||
|
||||
void spi_init(void)
|
||||
{
|
||||
int rv;
|
||||
|
||||
rv = spi_bus_register_imx("/dev/spi-0", "spi0");
|
||||
assert(rv == 0);
|
||||
}
|
||||
|
||||
Network Interface Driver
|
||||
------------------------
|
||||
|
||||
The network interface driver is provided by the `libbsd`. It is initialized
|
||||
according to the device tree. It supports checksum offload and interrupt
|
||||
coalescing. IPv6 transmit checksum offload is not implemented. The interrupt
|
||||
coalescing uses the MII/GMII clocks and can be controlled by the following
|
||||
system controls:
|
||||
|
||||
* ``dev.ffec.<unit>.int_coal.rx_time``
|
||||
* ``dev.ffec.<unit>.int_coal.rx_count``
|
||||
* ``dev.ffec.<unit>.int_coal.tx_time``
|
||||
* ``dev.ffec.<unit>.int_coal.tx_count``
|
||||
|
||||
A value of zero for the time or count disables the interrupt coalescing in the
|
||||
corresponding direction.
|
||||
|
||||
MMC/SDCard Driver
|
||||
-----------------
|
||||
|
||||
The MMC/SDCard driver (uSDHC module) is provided by the `libbsd`. It is
|
||||
initialized according to the device tree. Pin re-configuration according to
|
||||
the serial clock frequency is not supported. Data transfers are extremely
|
||||
slow. This is probably due to the missing DMA support.
|
||||
|
||||
Caveats
|
||||
-------
|
||||
|
||||
The clock and pin configuration support is quite rudimentary and mostly relies
|
||||
on the boot loader. For a pin group configuration see
|
||||
``imx_iomux_configure_pins()``. There is no power management support.
|
||||
|
||||
lm3s69xx
|
||||
========
|
||||
|
||||
TODO.
|
||||
|
||||
lpc176x
|
||||
=======
|
||||
|
||||
TODO.
|
||||
|
||||
lpc24xx (NXP LPC17XX/LPC24XX/LPC40XX)
|
||||
=====================================
|
||||
|
||||
This BSP offers only several variants. The following variants support the
|
||||
`Embedded Artits LPC4088 Developer's Kit <https://www.embeddedartists.com/products/lpc4088-developers-kit/>`_
|
||||
and earlier board generations:
|
||||
|
||||
* lpc17xx_ea_ram
|
||||
|
||||
* lpc17xx_ea_rom_int
|
||||
|
||||
* lpc24xx_ea
|
||||
|
||||
* lpc40xx_ea_ram
|
||||
|
||||
* lpc40xx_ea_rom_int
|
||||
|
||||
They can be used as a base line for customization. The basic hardware
|
||||
initialization is performed by the BSP. It can be customized via configuration
|
||||
options and configuration tables. See also
|
||||
`<bsp/start-config.h> <https://git.rtems.org/rtems/tree/bsps/arm/lpc24xx/include/bsp/start-config.h>`_.
|
||||
|
||||
Clock Driver
|
||||
------------
|
||||
|
||||
The clock driver of the Cortex-M variants uses the `ARMv7-M Systick`. The
|
||||
older ARM7TDMI variants use the `TMR0` timer module.
|
||||
|
||||
Console Driver
|
||||
--------------
|
||||
|
||||
The console driver supports up to four on-chip UARTs. Initialization can be
|
||||
customized via the ``lpc24xx_uart_probe_1()``, ``lpc24xx_uart_probe_2()`` and
|
||||
``lpc24xx_uart_probe_3()`` functions.
|
||||
|
||||
I2C Bus Driver
|
||||
--------------
|
||||
|
||||
I2C bus drivers are registered by the ``lpc24xx_register_i2c_0()``,
|
||||
``lpc24xx_register_i2c_1()`` and ``lpc24xx_register_i2c_2()`` functions. The
|
||||
I2C driver does not configure the pins. See also
|
||||
`<bsp/i2c.h> <https://git.rtems.org/rtems/tree/bsps/arm/lpc24xx/include/bsp/i2c.h>`_.
|
||||
|
||||
SPI Bus Driver
|
||||
--------------
|
||||
|
||||
SPI bus drivers are registered by the ``lpc24xx_register_ssp_0()``,
|
||||
``lpc24xx_register_ssp_1()`` and ``lpc24xx_register_ssp_2()`` functions. The
|
||||
SSP driver does not configure the pins. See also
|
||||
`<bsp/ssp.h> <https://git.rtems.org/rtems/tree/bsps/arm/lpc24xx/include/bsp/ssp.h>`_.
|
||||
|
||||
Network Interface Driver
|
||||
------------------------
|
||||
|
||||
Only a legacy network driver is support. For a `libbsd` base driver the
|
||||
platform support is missing, see
|
||||
`if_lpe.c <https://git.rtems.org/rtems-libbsd/tree/rtemsbsd/sys/arm/lpc/if_lpe.c>`_.
|
||||
|
||||
USB Driver
|
||||
----------
|
||||
|
||||
The USB host driver (OHCI) is provided by the `libbsd`.
|
||||
|
||||
Framebuffer Driver
|
||||
------------------
|
||||
|
||||
For a custom framebuffer driver see
|
||||
`<bsp/lcd.h> <https://git.rtems.org/rtems/tree/bsps/arm/lpc24xx/include/bsp/lcd.h>`_.
|
||||
|
||||
RTC Driver
|
||||
----------
|
||||
|
||||
There is a standard RTC driver available using the on-chip RTC module.
|
||||
|
||||
lpc32xx
|
||||
=======
|
||||
|
||||
TODO.
|
||||
|
||||
raspberrypi
|
||||
===========
|
||||
|
||||
TODO.
|
||||
|
||||
realview-pbx-a9
|
||||
===============
|
||||
|
||||
TODO.
|
||||
|
||||
rtl22xx
|
||||
=======
|
||||
|
||||
TODO.
|
||||
|
||||
smdk2410
|
||||
========
|
||||
|
||||
TODO.
|
||||
|
||||
stm32f4
|
||||
=======
|
||||
|
||||
TODO.
|
||||
|
||||
tms570
|
||||
======
|
||||
|
||||
TODO.
|
||||
|
||||
xilinx-zynq
|
||||
===========
|
||||
|
||||
TODO.
|
||||
.. include:: arm/altera-cyclone-v.rst
|
||||
.. include:: arm/atsam.rst
|
||||
.. include:: arm/beagle.rst
|
||||
.. include:: arm/csb336.rst
|
||||
.. include:: arm/csb337.rst
|
||||
.. include:: arm/edb7312.rst
|
||||
.. include:: arm/gdbarmsim.rst
|
||||
.. include:: arm/gumstix.rst
|
||||
.. include:: arm/imx.rst
|
||||
.. include:: arm/lm3s69xx.rst
|
||||
.. include:: arm/lpc176x.rst
|
||||
.. include:: arm/imx.rst
|
||||
.. include:: arm/lpc32xx.rst
|
||||
.. include:: arm/raspberrypi.rst
|
||||
.. include:: arm/realview-pbx-a9.rst
|
||||
.. include:: arm/rtl22xx.rst
|
||||
.. include:: arm/smdk2410.rst
|
||||
.. include:: arm/stm32f4.rst
|
||||
.. include:: arm/tms570.rst
|
||||
.. include:: arm/xilinx-zynq.rst
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user