rtems/rtems-docs
1
0
Fork 0
mirror of https://git.rtems.org/rtems-docs/ synced 2025-07-03 19:00:43 +08:00
Code Issues Packages Projects Releases Wiki Activity

user/bsps: Update ZynqMP for hardware BSPs

Browse Source 
Update the ZynqMP documentation for the new hardware BSP variants
including information about booting, boot image generation, and
networking.
This commit is contained in:
Kinsey Moore 2021-07-01 13:25:44 -05:00 committed by Joel Sherrill
parent 7a91021c72
commit b528508dad
1 changed files with 49 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

57
user/bsps/aarch64/xilinx-zynqmp.rst
View File

@ -4,19 +4,46 @@
.. _BSP_aarch64_qemu_xilinx_zynqmp_ilp32_qemu: .. _BSP_aarch64_qemu_xilinx_zynqmp_ilp32_qemu:
.. _BSP_aarch64_qemu_xilinx_zynqmp_lp64_qemu: .. _BSP_aarch64_qemu_xilinx_zynqmp_lp64_qemu:
.. _BSP_aarch64_qemu_xilinx_zynqmp_ilp32_zu3eg:
.. _BSP_aarch64_qemu_xilinx_zynqmp_lp64_zu3eg:
Qemu Xilinx ZynqMP Qemu Xilinx ZynqMP
================== ==================
This BSP supports two variants, `xilinx-zynqmp-ilp32-qemu` and This BSP supports four variants: `xilinx-zynqmp-ilp32-qemu`,
`xilinx-zynqmp-lp64-qemu`. The basic hardware initialization is performed by the `xilinx-zynqmp-lp64-qemu`, `xilinx-zynqmp-ilp32-zu3eg`, and
BSP. These BSPs support the GICv2 interrupt controller present in all ZynqMP `xilinx-zynqmp-lp64-zu3eg`. Platform-specific hardware initialization is
systems. performed by ARM Trusted Firmware (ATF). Other basic hardware initialization is
performed by the BSP. These BSPs support the GICv2 interrupt controller present
in all ZynqMP systems. The zu3eg BSPs have also been tested to be fully
functional on zu2cg boards and should also work on any other ZynqMP chip variant
since the Processing Subsystem (PS) does not vary among chip variants other than
the number of CPU cores available.
Boot via ELF Boot on QEMU
------------ ------------
The executable image is booted by Qemu in ELF format. The executable image is booted by Qemu in ELF format.
Boot on ZynqMP Hardware
-----------------------
On ZynqMP hardware, RTEMS can be started at EL1, EL2, or EL3 by u-boot or
directly as part of BOOT.bin. Regardless of the exception level at boot, RTEMS
will drop to EL1 for execution. For quick turnaround during testing, it is
recommended to use the u-boot BOOT.bin that comes with the PetaLinux prebuilts
for the board in question.
Hardware Boot Image Generation
------------------------------
RTEMS expects some hardware initialization to be performed by ATF and expects
the services it provides to be present, so this must be included when generating
a direct-boot RTEMS BOOT.bin.
When booting via u-boot, RTEMS must be packaged into a u-boot image or booted
as a raw binary since u-boot does not currently support ELF64 which is required
for AArch64 ELF binaries.
Clock Driver Clock Driver
------------ ------------
@ -25,10 +52,24 @@ The clock driver uses the `ARM Generic Timer`.
Console Driver Console Driver
-------------- --------------
The console driver supports the default Qemu emulated ARM PL011 PrimeCell UART. The console driver supports the default Qemu emulated ARM PL011 PrimeCell UART
as well as the physical ARM PL011 PrimeCell UART in the ZynqMP hardware.
Running Executables Network Configuration
------------------- ---------------------
When used with LibBSD, these BSP variants support networking via the four
Cadence GEM instances present on all ZynqMP hardware variants. These are enabled
using config.inc in LibBSD by setting any of the following constants to 1:
NET_CFG_ZYNQMP_USE_CGEM0 = 1
NET_CFG_ZYNQMP_USE_CGEM1 = 1
NET_CFG_ZYNQMP_USE_CGEM2 = 1
NET_CFG_ZYNQMP_USE_CGEM3 = 1
Most ZynqMP dev boards use CGEM3. None of the interfaces are enabled by default.
Running Executables on QEMU
---------------------------
Executables generated by these BSPs can be run using the following command:: Executables generated by these BSPs can be run using the following command::