rtems-docs/shell/file_and_directory.rst

File and Directory Commands
###########################

Introduction
============

The RTEMS shell has the following file and directory commands:

- ``blksync`` - sync the block driver

- ``cat`` - display file contents

- ``cd`` - alias for chdir

- ``chdir`` - change the current directory

- ``chmod`` - change permissions of a file

- ``chroot`` - change the root directory

- ``cp`` - copy files

- ``dd`` - format disks

- ``debugrfs`` - debug RFS file system

- ``df`` - display file system disk space usage

- ``dir`` - alias for ls

- ``fdisk`` - format disks

- ``hexdump`` - format disks

- ``ln`` - make links

- ``ls`` - list files in the directory

- ``md5`` - display file system disk space usage

- ``mkdir`` - create a directory

- ``mkdos`` - DOSFS disk format

- ``mknod`` - make device special file

- ``mkrfs`` - format RFS file system

- ``mount`` - mount disk

- ``mv`` - move files

- ``pwd`` - print work directory

- ``rmdir`` - remove empty directories

- ``rm`` - remove files

- ``umask`` - Set file mode creation mask

- ``unmount`` - unmount disk

Commands
========

This section details the File and Directory Commands available.  A
subsection is dedicated to each of the commands and
describes the behavior and configuration of that
command as well as providing an example usage.

blksync - sync the block driver
-------------------------------
.. index:: blksync

**SYNOPSYS:**

.. code:: c

    blksync driver

**DESCRIPTION:**

This command XXX

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``blksync``:
.. code:: c

    EXAMPLE_TBD

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_BLKSYNC
.. index:: CONFIGURE_SHELL_COMMAND_BLKSYNC

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_BLKSYNC`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_BLKSYNC`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_blksync

The ``blksync`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_blksync(
    int    argc,
    char \**argv
    );

The configuration structure for the ``blksync`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_BLKSYNC_Command;

cat - display file contents
---------------------------
.. index:: cat

**SYNOPSYS:**

.. code:: c

    cat file1 \[file2 .. fileN]

**DESCRIPTION:**

This command displays the contents of the specified files.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

It is possible to read the input from a device file using ``cat``.

**EXAMPLES:**

The following is an example of how to use ``cat``:
.. code:: c

    SHLL \[/] # cat /etc/passwd
    root:\*:0:0:root::/:/bin/sh
    rtems:\*:1:1:RTEMS Application::/:/bin/sh
    tty:!:2:2:tty owner::/:/bin/false

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_CAT
.. index:: CONFIGURE_SHELL_COMMAND_CAT

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_CAT`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_CAT`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_cat

The ``cat`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_cat(
    int    argc,
    char \**argv
    );

The configuration structure for the ``cat`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_CAT_Command;

cd - alias for chdir
--------------------
.. index:: cd

**SYNOPSYS:**

.. code:: c

    cd directory

**DESCRIPTION:**

This command is an alias or alternate name for the ``chdir``.
See `ls - list files in the directory`_ for more information.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``cd``:
.. code:: c

    SHLL \[/] $ cd etc
    SHLL \[/etc] $ cd /
    SHLL \[/] $ cd /etc
    SHLL \[/etc] $ pwd
    /etc
    SHLL \[/etc] $ cd /
    SHLL \[/] $ pwd
    /
    SHLL \[/] $ cd etc
    SHLL \[/etc] $ cd ..
    SHLL \[/] $ pwd
    /

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_CD
.. index:: CONFIGURE_SHELL_COMMAND_CD

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_CD`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_CD`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_cd

The ``cd`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_cd(
    int    argc,
    char \**argv
    );

The configuration structure for the ``cd`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_CD_Command;


chdir - change the current directory
------------------------------------
.. index:: chdir

**SYNOPSYS:**

.. code:: c

    chdir \[dir]

**DESCRIPTION:**

This command is used to change the current working directory to
the specified directory.  If no arguments are given, the current
working directory will be changed to ``/``.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``chdir``:
.. code:: c

    SHLL \[/] $ pwd
    /
    SHLL \[/] $ chdir etc
    SHLL \[/etc] $ pwd
    /etc

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_CHDIR
.. index:: CONFIGURE_SHELL_COMMAND_CHDIR

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_CHDIR`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_CHDIR`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_chdir

The ``chdir`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_chdir(
    int    argc,
    char \**argv
    );

The configuration structure for the ``chdir`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_CHDIR_Command;

chmod - change permissions of a file
------------------------------------
.. index:: chmod

**SYNOPSYS:**

.. code:: c

    chmod permissions file1 \[file2...]

**DESCRIPTION:**

This command changes the permissions on the files specified to the
indicated ``permissions``.  The permission values are POSIX based
with owner, group, and world having individual read, write, and
executive permission bits.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

The ``chmod`` command only takes numeric representations of
the permissions.

**EXAMPLES:**

The following is an example of how to use ``chmod``:
.. code:: c

    SHLL \[/] # cd etc
    SHLL \[/etc] # ls
    -rw-r--r--   1   root   root         102 Jan 01 00:00 passwd
    -rw-r--r--   1   root   root          42 Jan 01 00:00 group
    -rw-r--r--   1   root   root          30 Jan 01 00:00 issue
    -rw-r--r--   1   root   root          28 Jan 01 00:00 issue.net
    4 files 202 bytes occupied
    SHLL \[/etc] # chmod 0777 passwd
    SHLL \[/etc] # ls
    -rwxrwxrwx   1   root   root         102 Jan 01 00:00 passwd
    -rw-r--r--   1   root   root          42 Jan 01 00:00 group
    -rw-r--r--   1   root   root          30 Jan 01 00:00 issue
    -rw-r--r--   1   root   root          28 Jan 01 00:00 issue.net
    4 files 202 bytes occupied
    SHLL \[/etc] # chmod 0322 passwd
    SHLL \[/etc] # ls
    --wx-w--w-   1 nouser   root         102 Jan 01 00:00 passwd
    -rw-r--r--   1 nouser   root          42 Jan 01 00:00 group
    -rw-r--r--   1 nouser   root          30 Jan 01 00:00 issue
    -rw-r--r--   1 nouser   root          28 Jan 01 00:00 issue.net
    4 files 202 bytes occupied
    SHLL \[/etc] # chmod 0644 passwd
    SHLL \[/etc] # ls
    -rw-r--r--   1   root   root         102 Jan 01 00:00 passwd
    -rw-r--r--   1   root   root          42 Jan 01 00:00 group
    -rw-r--r--   1   root   root          30 Jan 01 00:00 issue
    -rw-r--r--   1   root   root          28 Jan 01 00:00 issue.net
    4 files 202 bytes occupied

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_CHMOD
.. index:: CONFIGURE_SHELL_COMMAND_CHMOD

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_CHMOD`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_CHMOD`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_chmod

The ``chmod`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_chmod(
    int    argc,
    char \**argv
    );

The configuration structure for the ``chmod`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_CHMOD_Command;

chroot - change the root directory
----------------------------------
.. index:: chroot

**SYNOPSYS:**

.. code:: c

    chroot \[dir]

**DESCRIPTION:**

This command changes the root directory to ``dir`` for subsequent
commands.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

The destination directory ``dir`` must exist.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``chroot``
and the impact it has on the environment for subsequent
command invocations:
.. code:: c

    SHLL \[/] $ cat passwd
    cat: passwd: No such file or directory
    SHLL \[/] $ chroot etc
    SHLL \[/] $ cat passwd
    root:\*:0:0:root::/:/bin/sh
    rtems:\*:1:1:RTEMS Application::/:/bin/sh
    tty:!:2:2:tty owner::/:/bin/false
    SHLL \[/] $ cat /etc/passwd
    cat: /etc/passwd: No such file or directory

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_CHROOT
.. index:: CONFIGURE_SHELL_COMMAND_CHROOT

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_CHROOT`` to have this
command included. Additional to that you have to add one
POSIX key value pair for each thread where you want to use
the command.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_CHROOT`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_chroot

The ``chroot`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_chroot(
    int    argc,
    char \**argv
    );

The configuration structure for the ``chroot`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_CHROOT_Command;

cp - copy files
---------------
.. index:: cp

**SYNOPSYS:**

.. code:: c

    cp \[-R \[-H | -L | -P]] \[-f | -i] \[-pv] src target
    cp \[-R \[-H | -L] ] \[-f | -i] \[-NpPv] source_file ... target_directory

**DESCRIPTION:**

In the first synopsis form, the cp utility copies the contents of the
source_file to the target_file. In the second synopsis form, the contents of
each named source_file is copied to the destination target_directory. The names
of the files themselves are not changed. If cp detects an attempt to copy a
file to itself, the copy will fail.

The following options are available:

*-f*
    For each existing destination pathname, attempt to overwrite it. If permissions
    do not allow copy to succeed, remove it and create a new file, without
    prompting for confirmation. (The -i option is ignored if the -f option is
    specified.)

*-H*
    If the -R option is specified, symbolic links on the command line are followed.
    (Symbolic links encountered in the tree traversal are not followed.)

*-i*
    Causes cp to write a prompt to the standard error output before copying a file
    that would overwrite an existing file. If the response from the standard input
    begins with the character ’y’, the file copy is attempted.

*-L*
    If the -R option is specified, all symbolic links are followed.

*-N*
    When used with -p, do not copy file flags.

*-P*
    No symbolic links are followed.

*-p*
    Causes cp to preserve in the copy as many of the modification time, access
    time, file flags, file mode, user ID, and group ID as allowed by permissions.
    If the user ID and group ID cannot be preserved, no error message is displayed
    and the exit value is not altered.
    If the source file has its set user ID bit on and the user ID cannot be
    preserved, the set user ID bit is not preserved in the copy’s permissions. If
    the source file has its set group ID bit on and the group ID cannot be
    preserved, the set group ID bit is not preserved in the copy’s permissions. If
    the source file has both its set user ID and set group ID bits on, and either
    the user ID or group ID cannot be preserved, neither the set user ID or set
    group ID bits are preserved in the copy’s permissions.

*-R*
    If source_file designates a directory, cp copies the directory and the entire
    subtree connected at that point. This option also causes symbolic links to be
    copied, rather than indirected through, and for cp to create special files
    rather than copying them as normal files. Created directories have the same
    mode as the corresponding source directory, unmodified by the process’s umask.

*-v*
    Cause cp to be verbose, showing files as they are copied.

For each destination file that already exists, its contents are overwritten if
permissions allow, but its mode, user ID, and group ID are unchanged.

In the second synopsis form, target_directory must exist unless there is only
one named source_file which is a directory and the -R flag is specified.

If the destination file does not exist, the mode of the source file is used as
modified by the file mode creation mask (umask, see csh(1)). If the source file
has its set user ID bit on, that bit is removed unless both the source file and
the destination file are owned by the same user. If the source file has its set
group ID bit on, that bit is removed unless both the source file and the
destination file are in the same group and the user is a member of that group.
If both the set user ID and set group ID bits are set, all of the above
conditions must be fulfilled or both bits are removed.

Appropriate permissions are required for file creation or overwriting.

Symbolic links are always followed unless the -R flag is set, in which case
symbolic links are not followed, by default. The -H or -L flags (in conjunction
with the -R flag), as well as the -P flag cause symbolic links to be followed
as described above. The -H and -L options are ignored unless the -R option is
specified. In addition, these options override eachsubhedading other and the
command’s actions are determined by the last one specified.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``cp`` to
copy a file to a new name in the current directory:
.. code:: c

    SHLL \[/] # cat joel
    cat: joel: No such file or directory
    SHLL \[/] # cp etc/passwd joel
    SHLL \[/] # cat joel
    root:\*:0:0:root::/:/bin/sh
    rtems:\*:1:1:RTEMS Application::/:/bin/sh
    tty:!:2:2:tty owner::/:/bin/false
    SHLL \[/] # ls
    drwxr-xr-x   1   root   root         536 Jan 01 00:00 dev/
    drwxr-xr-x   1   root   root        1072 Jan 01 00:00 etc/
    -rw-r--r--   1   root   root         102 Jan 01 00:00 joel
    3 files 1710 bytes occupied

The following is an example of how to use ``cp`` to
copy one or more files to a destination directory and
use the same ``basename`` in the destination directory:
.. code:: c

    SHLL \[/] # mkdir tmp
    SHLL \[/] # ls tmp
    0 files 0 bytes occupied
    SHLL \[/] # cp /etc/passwd tmp
    SHLL \[/] # ls /tmp
    -rw-r--r--   1   root   root         102 Jan 01 00:01 passwd
    1 files 102 bytes occupied
    SHLL \[/] # cp /etc/passwd /etc/group /tmp
    SHLL \[/] # ls /tmp
    -rw-r--r--   1   root   root         102 Jan 01 00:01 passwd
    -rw-r--r--   1   root   root          42 Jan 01 00:01 group
    2 files 144 bytes occupied
    SHLL \[/] #

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_CP
.. index:: CONFIGURE_SHELL_COMMAND_CP

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_CP`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_CP`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_main_cp

The ``cp`` command is implemented by a C language function which
has the following prototype:
.. code:: c

    int rtems_shell_main_cp(
    int    argc,
    char \**argv
    );

The configuration structure for the ``cp`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_CP_Command;

**ORIGIN:**

The implementation and portions of the documentation for this
command are from NetBSD 4.0.

dd - convert and copy a file
----------------------------
.. index:: dd

**SYNOPSYS:**

.. code:: c

    dd \[operands ...]

**DESCRIPTION:**

The dd utility copies the standard input to the standard output.
Input data is read and written in 512-byte blocks.  If input reads are
short, input from multiple reads are aggregated to form the output
block.  When finished, dd displays the number of complete and partial
input and output blocks and truncated input records to the standard
error output.

The following operands are available:

*bs=n*
    Set both input and output block size, superseding the ibs and obs
    operands.  If no conversion values other than noerror, notrunc or sync
    are specified, then each input block is copied to the output as a
    single block without any aggregation of short blocks.

*cbs=n*
    Set the conversion record size to n bytes.  The conversion record size
    is required by the record oriented conversion values.

*count=n*
    Copy only n input blocks.

*files=n*
    Copy n input files before terminating.  This operand is only
    applicable when the input device is a tape.

*ibs=n*
    Set the input block size to n bytes instead of the default 512.

*if=file*
    Read input from file instead of the standard input.

*obs=n*
    Set the output block size to n bytes instead of the default 512.

*of=file*
    Write output to file instead of the standard output.  Any regular
    output file is truncated unless the notrunc conversion value is
    specified.  If an initial portion of the output file is skipped (see
    the seek operand) the output file is truncated at that point.

*seek=n*
    Seek n blocks from the beginning of the output before copying.  On
    non-tape devices, a *lseek* operation is used.  Otherwise, existing
    blocks are read and the data discarded.  If the seek operation is past
    the end of file, space from the current end of file to the specified
    offset is filled with blocks of NUL bytes.

*skip=n*
    Skip n blocks from the beginning of the input before copying.  On
    input which supports seeks, a *lseek* operation is used.  Otherwise,
    input data is read and discarded.  For pipes, the correct number of
    bytes is read.  For all other devices, the correct number of blocks is
    read without distinguishing between a partial or complete block being
    read.

*progress=n*
    Switch on display of progress if n is set to any non-zero value.  This
    will cause a “.” to be printed (to the standard error output) for
    every n full or partial blocks written to the output file.

*conv=value[,value...]*
    Where value is one of the symbols from the following list.

    *ascii, oldascii*

        The same as the unblock value except that characters are translated
        from EBCDIC to ASCII before the records are converted.  (These values
        imply unblock if the operand cbs is also specified.)  There are two
        conversion maps for ASCII.  The value ascii specifies the recom-
        mended one which is compatible with AT&T System V UNIX.  The value
        oldascii specifies the one used in historic AT&T and pre 4.3BSD-Reno
        systems.

    *block*

        Treats the input as a sequence of newline or end-of-file terminated
        variable length records independent of input and output block
        boundaries.  Any trailing newline character is discarded.  Each
        input record is converted to a fixed length output record where the
        length is specified by the cbs operand.  Input records shorter than
        the conversion record size are padded with spaces.  Input records
        longer than the conversion record size are truncated.  The number of
        truncated input records, if any, are reported to the standard error
        output at the completion of the copy.

    *ebcdic, ibm, oldebcdic, oldibm*

        The same as the block value except that characters are translated from
        ASCII to EBCDIC after the records are converted.  (These values imply
        block if the operand cbs is also specified.)  There are four
        conversion maps for EBCDIC.  The value ebcdic specifies the
        recommended one which is compatible with AT&T System V UNIX.  The
        value ibm is a slightly different mapping, which is compatible with
        the AT&T System V UNIX ibm value.  The values oldebcdic and oldibm are
        maps used in historic AT&T and pre 4.3BSD-Reno systems.

    *lcase*

        Transform uppercase characters into lowercase characters.

    *noerror*

        Do not stop processing on an input error.  When an input error occurs,
        a diagnostic message followed by the current input and output block
        counts will be written to the standard error output in the same format
        as the standard completion message.  If the sync conversion is also
        specified, any missing input data will be replaced with NUL bytes (or
        with spaces if a block oriented conversion value was specified) and
        processed as a normal input buffer.  If the sync conversion is not
        specified, the input block is omitted from the output.  On input files
        which are not tapes or pipes, the file offset will be positioned past
        the block in which the error occurred using lseek(2).

    *notrunc*

        Do not truncate the output file.  This will preserve any blocks in the
        output file not explicitly written by dd.  The notrunc value is not
        supported for tapes.

    *osync*

        Pad the final output block to the full output block size.  If the
        input file is not a multiple of the output block size after
        conversion, this conversion forces the final output block to be the
        same size as preceding blocks for use on devices that require
        regularly sized blocks to be written.  This option is incompatible
        with use of the bs=n block size specification.

    *sparse*

        If one or more non-final output blocks would consist solely of NUL
        bytes, try to seek the output file by the required space instead of
        filling them with NULs.  This results in a sparse file on some file
        systems.

    *swab*

        Swap every pair of input bytes.  If an input buffer has an odd number
        of bytes, the last byte will be ignored during swapping.

    *sync*

        Pad every input block to the input buffer size.  Spaces are used for
        pad bytes if a block oriented conversion value is specified, otherwise
        NUL bytes are used.

    *ucase*

        Transform lowercase characters into uppercase characters.

    *unblock*

        Treats the input as a sequence of fixed length records independent of
        input and output block boundaries.  The length of the input records is
        specified by the cbs operand.  Any trailing space characters are
        discarded and a newline character is appended.

Where sizes are specified, a decimal number of bytes is expected.  Two
or more numbers may be separated by an “x” to indicate a product.
Each number may have one of the following optional suffixes:

*b*
    Block; multiply by 512

*k*
    Kibi; multiply by 1024 (1 KiB)

*m*
    Mebi; multiply by 1048576 (1 MiB)

*g*
    Gibi; multiply by 1073741824 (1 GiB)

*t*
    Tebi; multiply by 1099511627776 (1 TiB)

*w*
    Word; multiply by the number of bytes in an integer

When finished, dd displays the number of complete and partial input
and output blocks, truncated input records and odd-length
byte-swapping ritten.  Partial output blocks to tape devices are
considered fatal errors.  Otherwise, the rest of the block will be
written.  Partial output blocks to character devices will produce a
warning message.  A truncated input block is one where a variable
length record oriented conversion value was specified and the input
line was too long to fit in the conversion record or was not newline
terminated.

Normally, data resulting from input or conversion or both are
aggregated into output blocks of the specified size.  After the end of
input is reached, any remaining output is written as a block.  This
means that the final output block may be shorter than the output block
size.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``dd``:
.. code:: c

    SHLL \[/] $ dd if=/nfs/boot-image of=/dev/hda1

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_DD
.. index:: CONFIGURE_SHELL_COMMAND_DD

This command is included in the default shell command set.  When
building a custom command set, define``CONFIGURE_SHELL_COMMAND_DD`` to have this command included.

This command can be excluded from the shell command set by defining``CONFIGURE_SHELL_NO_COMMAND_DD`` when all shell commands have been
configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_dd

The ``dd`` command is implemented by a C language function which
has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_dd(
    int    argc,
    char \**argv
    );

The configuration structure for the ``dd`` has the following
prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_DD_Command;

debugrfs - debug RFS file system
--------------------------------
.. index:: debugrfs

**SYNOPSYS:**

.. code:: c

    debugrfs \[-hl] path command \[options]

**DESCRIPTION:**

The command provides debugging information for the RFS file system.

The options are:

*-h*
    Print a help message.

*-l*
    List the commands.

*path*
    Path to the mounted RFS file system. The file system has to be mounted
    to view to use this command.

The commands are:

*block start \[end]*
    Display the contents of the blocks from start to end.

*data*
    Display the file system data and configuration.

*dir bno*
    Process the block as a directory displaying the entries.

*group start \[end]*
    Display the group data from the start group to the end group.

*inode \[-aef] \[start] \[end]*

    Display the inodes between start and end. If no start and end is
    provides all inodes are displayed.

    *-a*

        Display all inodes. That is allocated and unallocated inodes.

    *-e*

        Search and display on inodes that have an error.

    *-f*

        Force display of inodes, even when in error.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``debugrfs``:
.. code:: c

    SHLL \[/] $ debugrfs /c data

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_DEBUGRFS
.. index:: CONFIGURE_SHELL_COMMAND_DEBUGRFS

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_DEBUGRFS`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_DEBUGRFS`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_debugrfs

The ``debugrfs`` command is implemented by a C language function which
has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_debugrfs(
    int    argc,
    char \**argv
    );

The configuration structure for ``debugrfs`` has the following
prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_DEBUGRFS_Command;

df - display file system disk space usage
-----------------------------------------
.. index:: df

**SYNOPSYS:**

.. code:: c

    df \[-h] \[-B block_size]

**DESCRIPTION:**

This command print disk space usage for mounted file systems.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``df``:
.. code:: c

    SHLL \[/] $ df -B 4K
    Filesystem     4K-blocks        Used   Available       Use%     Mounted on
    /dev/rda               124         1         124         0%   /mnt/ramdisk
    SHLL \[/] $ df
    Filesystem     1K-blocks        Used   Available       Use%     Mounted on
    /dev/rda               495         1         494         0%   /mnt/ramdisk
    SHLL \[/] $ df -h
    Filesystem     Size             Used   Available       Use%     Mounted on
    /dev/rda              495K        1K        494K         0%   /mnt/ramdisk

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_DF
.. index:: CONFIGURE_SHELL_COMMAND_DF

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_DF`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_DF`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_df

The ``df`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_main_df(
    int argc,
    char \**argv
    );

The configuration structure for the ``df`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_DF_Command;

dir - alias for ls
------------------
.. index:: dir

**SYNOPSYS:**

.. code:: c

    dir \[dir]

**DESCRIPTION:**

This command is an alias or alternate name for the ``ls``.
See `ls - list files in the directory`_
for more information.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``dir``:
.. code:: c

    SHLL \[/] $ dir
    drwxr-xr-x   1   root   root         536 Jan 01 00:00 dev/
    drwxr-xr-x   1   root   root        1072 Jan 01 00:00 etc/
    2 files 1608 bytes occupied
    SHLL \[/] $ dir etc
    -rw-r--r--   1   root   root         102 Jan 01 00:00 passwd
    -rw-r--r--   1   root   root          42 Jan 01 00:00 group
    -rw-r--r--   1   root   root          30 Jan 01 00:00 issue
    -rw-r--r--   1   root   root          28 Jan 01 00:00 issue.net
    4 files 202 bytes occupied

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_DIR
.. index:: CONFIGURE_SHELL_COMMAND_DIR

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_DIR`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_DIR`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_dir

The ``dir`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_dir(
    int    argc,
    char \**argv
    );

The configuration structure for the ``dir`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_DIR_Command;

fdisk - format disk
-------------------
.. index:: fdisk

**SYNOPSYS:**

.. code:: c

    fdisk

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_FDISK
.. index:: CONFIGURE_SHELL_COMMAND_FDISK

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_FDISK`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_FDISK`` when all
shell commands have been configured.

hexdump - ascii/dec/hex/octal dump
----------------------------------
.. index:: hexdump

**SYNOPSYS:**

.. code:: c

    hexdump \[-bcCdovx] \[-e format_string] \[-f format_file] \[-n length]
    \[-s skip] file ...

**DESCRIPTION:**

The hexdump utility is a filter which displays the specified files, or
the standard input, if no files are specified, in a user specified
format.

The options are as follows:

*-b*
    One-byte octal display.  Display the input offset in hexadecimal,
    followed by sixteen space-separated, three column, zero-filled, bytes
    of input data, in octal, per line.

*-c*
    One-byte character display.  Display the input offset in hexadecimal,
    followed by sixteen space-separated, three column, space-filled,
    characters of input data per line.

*-C*
    Canonical hex+ASCII display.  Display the input offset in hexadecimal,
    followed by sixteen space-separated, two column, hexadecimal bytes,
    followed by the same sixteen bytes in %_p format enclosed in “|”
    characters.

*-d*
    Two-byte decimal display.  Display the input offset in hexadecimal,
    followed by eight space-separated, five column, zero-filled, two-byte
    units of input data, in unsigned decimal, per line.

*-e format_string*
    Specify a format string to be used for displaying data.

*-f format_file*
    Specify a file that contains one or more newline separated format
    strings.  Empty lines and lines whose first non-blank character is a
    hash mark (#) are ignored.

*-n length*
    Interpret only length bytes of input.

*-o*
    Two-byte octal display.  Display the input offset in hexadecimal,
    followed by eight space-separated, six column, zerofilled, two byte
    quantities of input data, in octal, per line.

*-s offset*
    Skip offset bytes from the beginning of the input.  By default, offset
    is interpreted as a decimal number.  With a leading 0x or 0X, offset
    is interpreted as a hexadecimal number, otherwise, with a leading 0,
    offset is interpreted as an octal number.  Appending the character b,
    k, or m to offset causes it to be interpreted as a multiple of 512,
    1024, or 1048576, respectively.

*-v*
    The -v option causes hexdump to display all input data.  Without the
    -v option, any number of groups of output lines, which would be
    identical to the immediately preceding group of output lines (except
    for the input offsets), are replaced with a line containing a single
    asterisk.

*-x*
    Two-byte hexadecimal display.  Display the input offset in
    hexadecimal, followed by eight, space separated, four column,
    zero-filled, two-byte quantities of input data, in hexadecimal, per
    line.

For each input file, hexdump sequentially copies the input to standard
output, transforming the data according to the format strings
specified by the -e and -f options, in the order that they were
specified.

*Formats*

A format string contains any number of format units, separated by
whitespace.  A format unit contains up to three items: an iteration
count, a byte count, and a format.

The iteration count is an optional positive integer, which defaults to
one.  Each format is applied iteration count times.

The byte count is an optional positive integer.  If specified it
defines the number of bytes to be interpreted by each iteration of the
format.

If an iteration count and/or a byte count is specified, a single slash
must be placed after the iteration count and/or before the byte count
to disambiguate them.  Any whitespace before or after the slash is
ignored.

The format is required and must be surrounded by double quote (“ “)
marks.  It is interpreted as a fprintf-style format string (see*fprintf*), with the following exceptions:

- An asterisk (\*) may not be used as a field width or precision.

- A byte count or field precision is required for each “s” con-
  version character (unlike the fprintf(3) default which prints the
  entire string if the precision is unspecified).

- The conversion characters “h”, “l”, “n”, “p” and “q” are not
  supported.

- The single character escape sequences described in the C standard
  are supported:

      NUL                  \\0
      <alert character>    \\a
      <backspace>          \\b
      <form-feed>          \\f
      <newline>            \\n
      <carriage return>    \\r
      <tab>                \\t
      <vertical tab>       \\v

Hexdump also supports the following additional conversion strings:

*_a[dox]*
    Display the input offset, cumulative across input files, of the next
    byte to be displayed.  The appended characters d, o, and x specify the
    display base as decimal, octal or hexadecimal respectively.

*_A[dox]*
    Identical to the _a conversion string except that it is only performed
    once, when all of the input data has been processed.

*_c*
    Output characters in the default character set.  Nonprinting
    characters are displayed in three character, zero-padded octal, except
    for those representable by standard escape notation (see above), which
    are displayed as two character strings.

*_p*
    Output characters in the default character set.  Nonprinting
    characters are displayed as a single “.”.

*_u*
    Output US ASCII characters, with the exception that control characters
    are displayed using the following, lower-case, names.  Characters
    greater than 0xff, hexadecimal, are displayed as hexadecimal
    strings.
    000 nul  001 soh  002 stx  003 etx  004 eot  005 enq
    006 ack  007 bel  008 bs   009 ht   00A lf   00B vt
    00C ff   00D cr   00E so   00F si   010 dle  011 dc1
    012 dc2  013 dc3  014 dc4  015 nak  016 syn  017 etb
    018 can  019 em   01A sub  01B esc  01C fs   01D gs
    01E rs   01F us   07F del

The default and supported byte counts for the conversion characters
are as follows:

    %_c, %_p, %_u, %c       One byte counts only.
    %d, %i, %o, %u, %X, %x  Four byte default, one, two, four
    and eight byte counts supported.
    %E, %e, %f, %G, %g      Eight byte default, four byte
    counts supported.

The amount of data interpreted by each format string is the sum of the
data required by each format unit, which is the iteration count times
the byte count, or the iteration count times the number of bytes
required by the format if the byte count is not specified.

The input is manipulated in “blocks”, where a block is defined as
the largest amount of data specified by any format string.  Format
strings interpreting less than an input block’s worth of data, whose
last format unit both interprets some number of bytes and does not
have a specified iteration count, have the iteration count incremented
until the entire input block has been processed or there is not enough
data remaining in the block to satisfy the format string.

If, either as a result of user specification or hexdump modifying the
iteration count as described above, an iteration count is greater than
one, no trailing whitespace characters are output during the last
iteration.

It is an error to specify a byte count as well as multiple conversion
characters or strings unless all but one of the conversion characters
or strings is _a or _A.

If, as a result of the specification of the -n option or end-of-file
being reached, input data only partially satisfies a format string,
the input block is zero-padded sufficiently to display all available
data (i.e. any format units overlapping the end of data will display
some num- ber of the zero bytes).

Further output by such format strings is replaced by an equivalent
number of spaces.  An equivalent number of spaces is defined as the
number of spaces output by an s conversion character with the same
field width and precision as the original conversion character or
conversion string but with any “+”, “ ”, “#” conversion flag
characters removed, and ref- erencing a NULL string.

If no format strings are specified, the default display is equivalent
to specifying the -x option.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``hexdump``:
.. code:: c

    SHLL \[/] $ hexdump -C -n 512 /dev/hda1

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_HEXDUMP
.. index:: CONFIGURE_SHELL_COMMAND_HEXDUMP

This command is included in the default shell command set.  When
building a custom command set, define``CONFIGURE_SHELL_COMMAND_HEXDUMP`` to have this command included.

This command can be excluded from the shell command set by defining``CONFIGURE_SHELL_NO_COMMAND_HEXDUMP`` when all shell commands have
been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_hexdump

The ``hexdump`` command is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_hexdump(
    int    argc,
    char \**argv
    );

The configuration structure for the ``hexdump`` has the following
prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_HEXDUMP_Command;

ln - make links
---------------
.. index:: ln

**SYNOPSYS:**

.. code:: c

    ln \[-fhinsv] source_file \[target_file]
    ln \[-fhinsv] source_file ... target_dir

**DESCRIPTION:**

The ln utility creates a new directory entry (linked file) which has
the same modes as the original file.  It is useful for maintaining
multiple copies of a file in many places at once without using up
storage for the “copies”; instead, a link “points” to the original
copy.  There are two types of links; hard links and symbolic links.
How a link “points” to a file is one of the differences between a
hard or symbolic link.

The options are as follows:

*-f*
    Unlink any already existing file, permitting the link to occur.

*-h*
    If the target_file or target_dir is a symbolic link, do not follow it.
    This is most useful with the -f option, to replace a symlink which may
    point to a directory.

*-i*
    Cause ln to write a prompt to standard error if the target file
    exists.  If the response from the standard input begins with the
    character ‘y’ or ‘Y’, then unlink the target file so that the link may
    occur.  Otherwise, do not attempt the link.  (The -i option overrides
    any previous -f options.)

*-n*
    Same as -h, for compatibility with other ln implementations.

*-s*
    Create a symbolic link.

*-v*
    Cause ln to be verbose, showing files as they are processed.

By default ln makes hard links.  A hard link to a file is
indistinguishable from the original directory entry; any changes to a
file are effective independent of the name used to reference the file.
Hard links may not normally refer to directories and may not span file
systems.

A symbolic link contains the name of the file to which it is linked.
The referenced file is used when an *open* operation is performed on
the link.  A *stat* on a symbolic link will return the linked-to
file; an *lstat* must be done to obtain information about the link.
The *readlink* call may be used to read the contents of a symbolic
link.  Symbolic links may span file systems and may refer to
directories.

Given one or two arguments, ln creates a link to an existing file
source_file.  If target_file is given, the link has that name;
target_file may also be a directory in which to place the link;
otherwise it is placed in the current directory.  If only the
directory is specified, the link will be made to the last component of
source_file.

Given more than two arguments, ln makes links in target_dir to all the
named source files.  The links made will have the same name as the
files being linked to.

**EXIT STATUS:**

The ``ln`` utility exits 0 on success, and >0 if an error occurs.

**NOTES:**

NONE

**EXAMPLES:**

.. code:: c

    SHLL \[/] ln -s /dev/console /dev/con1

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_LN
.. index:: CONFIGURE_SHELL_COMMAND_LN

This command is included in the default shell command set.  When
building a custom command set, define``CONFIGURE_SHELL_COMMAND_LN`` to have this command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_LN`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_ln

The ``ln`` command is implemented by a C language function which
has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_ln(
    int    argc,
    char \**argv
    );

The configuration structure for the ``ln`` has the following
prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_LN_Command;

**ORIGIN:**

The implementation and portions of the documentation for this command
are from NetBSD 4.0.

ls - list files in the directory
--------------------------------
.. index:: ls

**SYNOPSYS:**

.. code:: c

    ls \[dir]

**DESCRIPTION:**

This command displays the contents of the specified directory.  If
no arguments are given, then it displays the contents of the current
working directory.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

This command currently does not display information on a set of
files like the POSIX ls(1).  It only displays the contents of
entire directories.

**EXAMPLES:**

The following is an example of how to use ``ls``:
.. code:: c

    SHLL \[/] $ ls
    drwxr-xr-x   1   root   root         536 Jan 01 00:00 dev/
    drwxr-xr-x   1   root   root        1072 Jan 01 00:00 etc/
    2 files 1608 bytes occupied
    SHLL \[/] $ ls etc
    -rw-r--r--   1   root   root         102 Jan 01 00:00 passwd
    -rw-r--r--   1   root   root          42 Jan 01 00:00 group
    -rw-r--r--   1   root   root          30 Jan 01 00:00 issue
    -rw-r--r--   1   root   root          28 Jan 01 00:00 issue.net
    4 files 202 bytes occupied
    SHLL \[/] $ ls dev etc
    -rwxr-xr-x   1  rtems   root           0 Jan 01 00:00 console
    -rwxr-xr-x   1   root   root           0 Jan 01 00:00 console_b

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_LS
.. index:: CONFIGURE_SHELL_COMMAND_LS

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_LS`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_LS`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_ls

The ``ls`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_ls(
    int    argc,
    char \**argv
    );

The configuration structure for the ``ls`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_LS_Command;

md5 - compute the Md5 hash of a file or list of files
-----------------------------------------------------
.. index:: md5

**SYNOPSYS:**

.. code:: c

    md5 <files>

**DESCRIPTION:**

This command prints the MD5 of a file. You can provide one or more
files on the command line and a hash for each file is printed in a
single line of output.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``md5``:
.. code:: c

    SHLL \[/] $ md5 shell-init
    MD5 (shell-init) = 43b4d2e71b47db79eae679a2efeacf31

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_MD5
.. index:: CONFIGURE_SHELL_COMMAND_MD5

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_MD5`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_MD5`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_md5

The ``df`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_main_md5(
    int argc,
    char \**argv
    );

The configuration structure for the ``md5`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_MD5_Command;

mkdir - create a directory
--------------------------
.. index:: mkdir

**SYNOPSYS:**

.. code:: c

    mkdir  dir \[dir1 .. dirN]

**DESCRIPTION:**

This command creates the set of directories in the order they
are specified on the command line.  If an error is encountered
making one of the directories, the command will continue to
attempt to create the remaining directories on the command line.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

If this command is invoked with no arguments, nothing occurs.

The user must have sufficient permissions to create the directory.
For the ``fileio`` test provided with RTEMS, this means the user
must login as ``root`` not ``rtems``.

**EXAMPLES:**

The following is an example of how to use ``mkdir``:
.. code:: c

    SHLL \[/] # ls
    drwxr-xr-x   1   root   root         536 Jan 01 00:00 dev/
    drwxr-xr-x   1   root   root        1072 Jan 01 00:00 etc/
    2 files 1608 bytes occupied
    SHLL \[/] # mkdir joel
    SHLL \[/] # ls joel
    0 files 0 bytes occupied
    SHLL \[/] # cp etc/passwd joel
    SHLL \[/] # ls joel
    -rw-r--r--   1   root   root         102 Jan 01 00:02 passwd
    1 files 102 bytes occupied

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_MKDIR
.. index:: CONFIGURE_SHELL_COMMAND_MKDIR

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_MKDIR`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_MKDIR`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_mkdir

The ``mkdir`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_mkdir(
    int    argc,
    char \**argv
    );

The configuration structure for the ``mkdir`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_MKDIR_Command;

mldos - DOSFS file system format
--------------------------------
.. index:: pwd

**SYNOPSYS:**

.. code:: c

    mkdir \[-V label] \[-s sectors/cluster] \[-r size] \[-v] path

**DESCRIPTION:**

This command formats a block device entry with the DOSFS file system.

*-V label*

*-s sectors/cluster*

*-r size*

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``mkdos``:
.. code:: c

    SHLL \[/] $ mkdos /dev/rda1

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_MKDOS
.. index:: CONFIGURE_SHELL_COMMAND_MKDOS

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_MKDOS`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_MKDOS`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_mkdos

The ``mkdos`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_mkdos(
    int    argc,
    char \**argv
    );

The configuration structure for the ``mkdos`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_MKDOS_Command;

mknod - make device special file
--------------------------------
.. index:: mknod

**SYNOPSYS:**

.. code:: c

    mknod \[-rR] \[-F fmt] \[-g gid] \[-m mode] \[-u uid] name \[c | b]
    \[driver | major] minor
    mknod \[-rR] \[-F fmt] \[-g gid] \[-m mode] \[-u uid] name \[c | b]
    major unit subunit
    mknod \[-rR] \[-g gid] \[-m mode] \[-u uid] name \[c | b] number
    mknod \[-rR] \[-g gid] \[-m mode] \[-u uid] name p

**DESCRIPTION:**

The mknod command creates device special files, or fifos.  Normally
the shell script /dev/MAKEDEV is used to create special files for
commonly known devices; it executes mknod with the appropriate
arguments and can make all the files required for the device.

To make nodes manually, the arguments are:

*-r*
    Replace an existing file if its type is incorrect.

*-R*
    Replace an existing file if its type is incorrect.  Correct the
    mode, user and group.

*-g gid*
    Specify the group for the device node.  The gid operand may be a
    numeric group ID or a group name.  If a group name is also a numeric
    group ID, the operand is used as a group name.  Precede a numeric
    group ID with a # to stop it being treated as a name.

*-m mode*
    Specify the mode for the device node.  The mode may be absolute or
    symbolic, see *chmod*.

*-u uid*
    Specify the user for the device node.  The uid operand may be a
    numeric user ID or a user name.  If a user name is also a numeric user
    ID, the operand is used as a user name.  Precede a numeric user ID
    with a # to stop it being treated as a name.

*name*
    Device name, for example “tty” for a termios serial device or “hd”
    for a disk.

*b | c | p*
    Type of device.  If the device is a block type device such as a tape
    or disk drive which needs both cooked and raw special files, the type
    is b.  All other devices are character type devices, such as terminal
    and pseudo devices, and are type c.  Specifying p creates fifo files.

*driver | major*
    The major device number is an integer number which tells the kernel
    which device driver entry point to use.  If the device driver is
    configured into the current kernel it may be specified by driver name
    or major number.

*minor*
    The minor device number tells the kernel which one of several similar
    devices the node corresponds to; for example, it may be a specific
    serial port or pty.

*unit and subunit*
    The unit and subunit numbers select a subset of a device; for example,
    the unit may specify a particular disk, and the subunit a partition on
    that disk.  (Currently this form of specification is only supported
    by the bsdos format, for compatibility with the BSD/OS mknod).

*number*
    A single opaque device number.  Useful for netbooted computers which
    require device numbers packed in a format that isn’t supported by
    -F.

**EXIT STATUS:**

The ``mknod`` utility exits 0 on success, and >0 if an error occurs.

**NOTES:**

NONE

**EXAMPLES:**

.. code:: c

    SHLL \[/] mknod c 3 0 /dev/ttyS10

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_MKNOD
.. index:: CONFIGURE_SHELL_COMMAND_MKNOD

This command is included in the default shell command set.  When
building a custom command set, define``CONFIGURE_SHELL_COMMAND_MKNOD`` to have this command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_MKNOD`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_mknod

The ``mknod`` command is implemented by a C language function which
has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_mknod(
    int    argc,
    char \**argv
    );

The configuration structure for the ``mknod`` has the following
prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_MKNOD_Command;

**ORIGIN:**

The implementation and portions of the documentation for this command
are from NetBSD 4.0.

mkrfs - format RFS file system
------------------------------
.. index:: mkrfs

**SYNOPSYS:**

.. code:: c

    mkrfs \[-vsbiIo] device

**DESCRIPTION:**

Format the block device with the RTEMS File System (RFS). The default
configuration with not parameters selects a suitable block size based
on the size of the media being formatted.

The media is broken up into groups of blocks. The number of blocks in
a group is based on the number of bits a block contains. The large a
block the more blocks a group contains and the fewer groups in the
file system.

The following options are provided:

*-v*
    Display configuration and progress of the format.

*-s*
    Set the block size in bytes.

*-b*
    The number of blocks in a group. The block count must be equal or less
    than the number of bits in a block.

*-i*
    Number of inodes in a group. The inode count must be equal or less
    than the number of bits in a block.

*-I*
    Initialise the inodes. The default is not to initialise the inodes and
    to rely on the inode being initialised when allocated. Initialising
    the inode table helps recovery if a problem appears.

*-o*
    Integer percentage of the media used by inodes. The default is 1%.

*device*
    Path of the device to format.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``mkrfs``:
.. code:: c

    SHLL \[/] $ mkrfs /dev/fdda

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_MKRFS
.. index:: CONFIGURE_SHELL_COMMAND_MKRFS

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_MKRFS`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_MKRFS`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_mkrfs

The ``mkrfs`` command is implemented by a C language function which
has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_mkrfs(
    int    argc,
    char \**argv
    );

The configuration structure for ``mkrfs`` has the following
prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_MKRFS_Command;

mount - mount disk
------------------
.. index:: mount

**SYNOPSYS:**

.. code:: c

    mount \[-t fstype] \[-r] \[-L] device path

**DESCRIPTION:**

The ``mount`` command will mount a block device to a mount point
using the specified file system. The files systems are:

- msdos - MSDOS File System

- tftp  - TFTP Network File System

- ftp   - FTP Network File System

- nfs   - Network File System

- rfs   - RTEMS File System

When the file system type is ’msdos’ or ’rfs’ the driver is a "block
device driver" node present in the file system. The driver is ignored
with the ’tftp’ and ’ftp’ file systems. For the ’nfs’ file system the
driver is the ’host:/path’ string that described NFS host and the
exported file system path.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

The mount point must exist.

The services offered by each file-system vary. For example you cannot list the
directory of a TFTP file-system as this server is not provided in the TFTP
protocol. You need to check each file-system’s documentation for the services
provided.

**EXAMPLES:**

Mount the Flash Disk driver to the ’/fd’ mount point:
.. code:: c

    SHLL \[/] $ mount -t msdos /dev/flashdisk0 /fd

Mount the NFS file system exported path ’bar’ by host ’foo’:
.. code:: c

    $ mount -t nfs foo:/bar /nfs

Mount the TFTP file system on ’/tftp’:
.. code:: c

    $ mount -t tftp /tftp

To access the TFTP files on server ’10.10.10.10’:
.. code:: c

    $ cat /tftp/10.10.10.10/test.txt

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_MOUNT
.. index:: CONFIGURE_SHELL_COMMAND_MOUNT

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_MOUNT`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_MOUNT`` when all
shell commands have been configured.

The mount command includes references to file-system code. If you do not wish
to include file-system that you do not use do not define the mount command
support for that file-system. The file-system mount command defines are:

- msdos - CONFIGURE_SHELL_MOUNT_MSDOS

- tftp - CONFIGURE_SHELL_MOUNT_TFTP

- ftp - CONFIGURE_SHELL_MOUNT_FTP

- nfs - CONFIGURE_SHELL_MOUNT_NFS

- rfs - CONFIGURE_SHELL_MOUNT_RFS

An example configuration is:
.. code:: c

    #define CONFIGURE_SHELL_MOUNT_MSDOS
    #ifdef RTEMS_NETWORKING
    #define CONFIGURE_SHELL_MOUNT_TFTP
    #define CONFIGURE_SHELL_MOUNT_FTP
    #define CONFIGURE_SHELL_MOUNT_NFS
    #define CONFIGURE_SHELL_MOUNT_RFS
    #endif

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_mount

The ``mount`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_mount(
    int    argc,
    char \**argv
    );

The configuration structure for the ``mount`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_MOUNT_Command;

mv - move files
---------------
.. index:: mv

**SYNOPSYS:**

.. code:: c

    mv \[-fiv] source_file target_file
    mv \[-fiv] source_file... target_file

**DESCRIPTION:**

In its first form, the mv utility renames the file named by the source
operand to the destination path named by the target operand.  This
form is assumed when the last operand does not name an already
existing directory.

In its second form, mv moves each file named by a source operand to a
destination file in the existing directory named by the directory
operand.  The destination path for each operand is the pathname
produced by the concatenation of the last operand, a slash, and the
final pathname component of the named file.

The following options are available:

*-f*
    Do not prompt for confirmation before overwriting the destination
    path.

*-i*
    Causes mv to write a prompt to standard error before moving a file
    that would overwrite an existing file.  If the response from the
    standard input begins with the character ’y’, the move is attempted.

*-v*
    Cause mv to be verbose, showing files as they are processed.

The last of any -f or -i options is the one which affects mv’s
behavior.

It is an error for any of the source operands to specify a nonexistent
file or directory.

It is an error for the source operand to specify a directory if the
target exists and is not a directory.

If the destination path does not have a mode which permits writing, mv
prompts the user for confirmation as specified for the -i option.

Should the *rename* call fail because source and target are on
different file systems, ``mv`` will remove the destination file,
copy the source file to the destination, and then remove the source.
The effect is roughly equivalent to:
.. code:: c

    rm -f destination_path && \\
    cp -PRp source_file destination_path && \\
    rm -rf source_file

**EXIT STATUS:**

The ``mv`` utility exits 0 on success, and >0 if an error occurs.

**NOTES:**

NONE

**EXAMPLES:**

.. code:: c

    SHLL \[/] mv /dev/console /dev/con1

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_MV
.. index:: CONFIGURE_SHELL_COMMAND_MV

This command is included in the default shell command set.  When
building a custom command set, define``CONFIGURE_SHELL_COMMAND_MV`` to have this command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_MV`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_main_mv

The ``mv`` command is implemented by a C language function which
has the following prototype:
.. code:: c

    int rtems_shell_main_mv(
    int    argc,
    char \**argv
    );

The configuration structure for the ``mv`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_MV_Command;

**ORIGIN:**

The implementation and portions of the documentation for this command
are from NetBSD 4.0.

pwd - print work directory
--------------------------
.. index:: pwd

**SYNOPSYS:**

.. code:: c

    pwd

**DESCRIPTION:**

This command prints the fully qualified filename of the current
working directory.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``pwd``:
.. code:: c

    SHLL \[/] $ pwd
    /
    SHLL \[/] $ cd dev
    SHLL \[/dev] $ pwd
    /dev

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_PWD
.. index:: CONFIGURE_SHELL_COMMAND_PWD

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_PWD`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_PWD`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_pwd

The ``pwd`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_pwd(
    int    argc,
    char \**argv
    );

The configuration structure for the ``pwd`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_PWD_Command;

rmdir - remove empty directories
--------------------------------
.. index:: rmdir

**SYNOPSYS:**

.. code:: c

    rmdir  \[dir1 .. dirN]

**DESCRIPTION:**

This command removes the specified set of directories.  If no
directories are provided on the command line, no actions are taken.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

This command is a implemented using the ``rmdir(2)`` system
call and all reasons that call may fail apply to this command.

**EXAMPLES:**

The following is an example of how to use ``rmdir``:
.. code:: c

    SHLL \[/] # mkdir joeldir
    SHLL \[/] # rmdir joeldir
    SHLL \[/] # ls joeldir
    joeldir: No such file or directory.

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_RMDIR
.. index:: CONFIGURE_SHELL_COMMAND_RMDIR

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_RMDIR`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_RMDIR`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_rmdir

The ``rmdir`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_rmdir(
    int    argc,
    char \**argv
    );

The configuration structure for the ``rmdir`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_RMDIR_Command;

rm - remove files
-----------------
.. index:: rm

**SYNOPSYS:**

.. code:: c

    rm file1 \[file2 ... fileN]

**DESCRIPTION:**

This command deletes a name from the filesystem.  If the specified file name
was the last link to a file and there are no ``open`` file descriptor
references to that file, then it is deleted and the associated space in
the file system is made available for subsequent use.

If the filename specified was the last link to a file but there
are open file descriptor references to it, then the file will
remain in existence until the last file descriptor referencing
it is closed.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

NONE

**EXAMPLES:**

The following is an example of how to use ``rm``:
.. code:: c

    SHLL \[/] # cp /etc/passwd tmpfile
    SHLL \[/] # cat tmpfile
    root:\*:0:0:root::/:/bin/sh
    rtems:\*:1:1:RTEMS Application::/:/bin/sh
    tty:!:2:2:tty owner::/:/bin/false
    SHLL \[/] # rm tmpfile
    SHLL \[/] # cat tmpfile
    cat: tmpfile: No such file or directory

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_RM
.. index:: CONFIGURE_SHELL_COMMAND_RM

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_RM`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_RM`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_main_rm

The ``rm`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_main_rm(
    int    argc,
    char \**argv
    );

The configuration structure for the ``rm`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_RM_Command;

umask - set file mode creation mask
-----------------------------------
.. index:: umask

**SYNOPSYS:**

.. code:: c

    umask \[new_umask]

**DESCRIPTION:**

This command sets the user file creation mask to ``new_umask``.  The
argument ``new_umask`` may be octal, hexadecimal, or decimal.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

This command does not currently support symbolic mode masks.

**EXAMPLES:**

The following is an example of how to use ``umask``:
.. code:: c

    SHLL \[/] $ umask
    022
    SHLL \[/] $ umask 0666
    0666
    SHLL \[/] $ umask
    0666

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_UMASK
.. index:: CONFIGURE_SHELL_COMMAND_UMASK

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_UMASK`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_UMASK`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_umask

The ``umask`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_umask(
    int    argc,
    char \**argv
    );

The configuration structure for the ``umask`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_UMASK_Command;

unmount - unmount disk
----------------------
.. index:: unmount

**SYNOPSYS:**

.. code:: c

    unmount path

**DESCRIPTION:**

This command unmounts the device at the specified ``path``.

**EXIT STATUS:**

This command returns 0 on success and non-zero if an error is encountered.

**NOTES:**

TBD - Surely there must be some warnings to go here.

**EXAMPLES:**

The following is an example of how to use ``unmount``:
.. code:: c

    EXAMPLE_TBD

**CONFIGURATION:**

.. index:: CONFIGURE_SHELL_NO_COMMAND_UNMOUNT
.. index:: CONFIGURE_SHELL_COMMAND_UNMOUNT

This command is included in the default shell command set.
When building a custom command set, define``CONFIGURE_SHELL_COMMAND_UNMOUNT`` to have this
command included.

This command can be excluded from the shell command set by
defining ``CONFIGURE_SHELL_NO_COMMAND_UNMOUNT`` when all
shell commands have been configured.

**PROGRAMMING INFORMATION:**

.. index:: rtems_shell_rtems_main_unmount

The ``unmount`` is implemented by a C language function
which has the following prototype:
.. code:: c

    int rtems_shell_rtems_main_unmount(
    int    argc,
    char \**argv
    );

The configuration structure for the ``unmount`` has the
following prototype:
.. code:: c

    extern rtems_shell_cmd_t rtems_shell_UNMOUNT_Command;

.. COMMENT: COPYRIGHT (c) 1988-2012.

.. COMMENT: On-Line Applications Research Corporation (OAR).

.. COMMENT: All rights reserved.