mirror of
https://git.rtems.org/rtems-docs/
synced 2025-05-15 14:56:41 +08:00
289 lines
19 KiB
ReStructuredText
289 lines
19 KiB
ReStructuredText
.. comment SPDX-License-Identifier: CC-BY-SA-4.0
|
|
|
|
.. comment: Copyright (c) 2016 Chris Johns <chrisj@rtems.org>
|
|
.. comment: All rights reserved.
|
|
|
|
.. _released-version:
|
|
|
|
Releases
|
|
========
|
|
.. index:: tarball
|
|
.. index:: release
|
|
|
|
RTEMS releases provide a stable version of the kernel for the supported
|
|
architectures. RTEMS maintaines the current and previous releases. Support for
|
|
older releases is provided using the RTEMS support channels.
|
|
|
|
Please read :ref:`development-host` before continuing. The following procedure
|
|
assumes you have installed and configured your host operating. It also assumes
|
|
you have installed any dependent packages needed when building the tools and
|
|
the kernel.
|
|
|
|
You need to select a location to build and install the RTEMS Tool chain and
|
|
RTEMS. Make sure there is plenty of disk space and a fast disk is
|
|
recommended. Our procedure will document building and installing the tools in a
|
|
base directory called :file:`/opt/rtems`. This path will require root
|
|
access. If you are working on a machine you do not have root access to you can
|
|
use a home directory, If building on Windows use :file:`/c/opt/rtems` to keep
|
|
the top level paths as short as possible. :ref:`windows-path-length` provides
|
|
more detail about path lengths on Windows.
|
|
|
|
The location used to install the tools and kernel is called the
|
|
`prefix`. :ref:`prefixes` explains prefixes and how to use them. It is best to
|
|
have a `prefix` for each different version of RTEMS you are using. If you are
|
|
using RTEMS 4.11 in production it is **not** a good idea to install a
|
|
development version of 5 over the top by using the same `prefix` as the 4.11
|
|
build. A separate `prefix` for each version avoids this.
|
|
|
|
Released versions of the RTEMS Source Builder (RSB) downloads all source code
|
|
for all packages from the :r:url:`ftp` rather than from the package's home
|
|
site. Hosting all the source on the :r:url:`ftp` ensures the source is present
|
|
for the life of the release on the :r:url:`ftp`. If there is a problem
|
|
accessing the RTEMS FTP the RSB will fall back to the packages home site.
|
|
|
|
The :r:url:`ftp` is hosted at the Oregon State University's The Open Source Lab
|
|
(http://osuosl.org/). This is a nonprofit organization working for the
|
|
advancement of open source technologies and RTEMS is very fortunate to be
|
|
shosted here. It has excellent internet access and performance.
|
|
|
|
.. note:: **Controlling the RTEMS Kernel Build**
|
|
|
|
Building releases by default does not build the RTEMS kernel. To
|
|
build the RTEMS kernel add the ``--with-rtems`` option to the RSB
|
|
command line.
|
|
|
|
By default all the BSPs for an architecture are built. If you only wish to
|
|
have a specific BSP built you can specify the BSP list by providing to the
|
|
RSB the option ``--with-rtemsbsp``. For example to build two BSPs for the
|
|
SPARC architecture you can supply ``--with-rtemsbsp="erc32 leon3"``. This can
|
|
speed the build time up for some architectures that have a lot of BSPs.
|
|
|
|
Once you have built the tools and kernel you can move to the Packages section
|
|
of the manual.
|
|
|
|
RTEMS Tools and Kernel
|
|
----------------------
|
|
|
|
This procedure will build a SPARC tool chain. Set up a suitable workspace to
|
|
build the release in. On Unix:
|
|
|
|
.. code-block:: shell
|
|
|
|
$ cd
|
|
$ mkdir -p development/rtems/releases
|
|
$ cd development/rtems/releases
|
|
|
|
If building on Windows:
|
|
|
|
.. code-block:: shell
|
|
|
|
$ cd /c
|
|
$ mkdir -p opt/rtems
|
|
$ cd opt/rtems
|
|
|
|
**Note** the paths on Windows will be different to those shown.
|
|
|
|
Download the RTEMS Source Builder (RSB) from the RTEMS FTP server:
|
|
|
|
.. code-block:: shell
|
|
|
|
$ wget https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz
|
|
--2016-03-21 10:50:04-- https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz
|
|
Resolving ftp.rtems.org (ftp.rtems.org)... 140.211.10.151
|
|
Connecting to ftp.rtems.org (ftp.rtems.org)|140.211.10.151|:443... connected.
|
|
HTTP request sent, awaiting response... 200 OK
|
|
Length: 967056 (944K) [application/x-xz]
|
|
Saving to: 'rtems-source-builder-4.11.0.tar.xz'
|
|
|
|
rtems-source-builder-4.1 100%[====================================>] 944.39K 206KB/s in 5.5s
|
|
|
|
2016-03-21 10:50:11 (173 KB/s) - 'rtems-source-builder-4.11.0.tar.xz' saved [967056/967056]
|
|
|
|
On Unix unpack the RSB release tar file using:
|
|
|
|
.. code-block:: shell
|
|
|
|
$ tar Jxf rtems-source-builder-4.11.0.tar.xz
|
|
$ cd rtems-source-builder-4.11.0/rtems/
|
|
|
|
On Windows you need to shorten the path (See :ref:`windows-path-length`) after
|
|
you have unpacked the tar file:
|
|
|
|
.. code-block:: shell
|
|
|
|
$ tar Jxf rtems-source-builder-4.11.0.tar.xz
|
|
$ mv rtems-source-builder-4.11.0 4.110
|
|
$ cd 4.11.0
|
|
|
|
Build a tool chain for the SPARC architecure. We are using the SPARC
|
|
architecture in our example because GDB has a good simulator that lets us run
|
|
and test the samples RTEMS builds by default
|
|
|
|
If building on Windows add ``--jobs=none`` to avoid GNU make issues on Windows
|
|
discussed in :ref:`msys2_parallel_builds`.
|
|
|
|
.. code-block:: shell
|
|
|
|
$ ../source-builder/sb-set-builder \
|
|
--prefix=/opt/rtems/4.11 4.11/rtems-sparc
|
|
Build Set: 4.11/rtems-sparc
|
|
Build Set: 4.11/rtems-autotools.bset
|
|
Build Set: 4.11/rtems-autotools-internal.bset
|
|
config: tools/rtems-autoconf-2.69-1.cfg
|
|
package: autoconf-2.69-x86_64-freebsd10.1-1
|
|
Creating source directory: sources
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz
|
|
downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%)
|
|
building: autoconf-2.69-x86_64-freebsd10.1-1
|
|
config: tools/rtems-automake-1.12.6-1.cfg
|
|
package: automake-1.12.6-x86_64-freebsd10.1-1
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz
|
|
downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%)
|
|
Creating source directory: patches
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff
|
|
downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%)
|
|
building: automake-1.12.6-x86_64-freebsd10.1-1
|
|
cleaning: autoconf-2.69-x86_64-freebsd10.1-1
|
|
cleaning: automake-1.12.6-x86_64-freebsd10.1-1
|
|
Build Set: Time 0:00:32.749337
|
|
Build Set: 4.11/rtems-autotools-base.bset
|
|
config: tools/rtems-autoconf-2.69-1.cfg
|
|
package: autoconf-2.69-x86_64-freebsd10.1-1
|
|
building: autoconf-2.69-x86_64-freebsd10.1-1
|
|
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.txt
|
|
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.xml
|
|
config: tools/rtems-automake-1.12.6-1.cfg
|
|
package: automake-1.12.6-x86_64-freebsd10.1-1
|
|
building: automake-1.12.6-x86_64-freebsd10.1-1
|
|
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.txt
|
|
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.xml
|
|
installing: autoconf-2.69-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
|
|
installing: automake-1.12.6-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
|
|
cleaning: autoconf-2.69-x86_64-freebsd10.1-1
|
|
cleaning: automake-1.12.6-x86_64-freebsd10.1-1
|
|
Build Set: Time 0:00:15.619219
|
|
Build Set: Time 0:00:48.371085
|
|
config: devel/expat-2.1.0-1.cfg
|
|
package: expat-2.1.0-x86_64-freebsd10.1-1
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz
|
|
downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%)
|
|
building: expat-2.1.0-x86_64-freebsd10.1-1
|
|
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.txt
|
|
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.xml
|
|
config: tools/rtems-binutils-2.26-1.cfg
|
|
package: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/binutils-2.26.tar.bz2 -> sources/binutils-2.26.tar.bz2
|
|
downloading: sources/binutils-2.26.tar.bz2 - 24.4MB of 24.4MB (100%)
|
|
building: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
|
|
reporting: tools/rtems-binutils-2.26-1.cfg ->
|
|
sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.txt
|
|
reporting: tools/rtems-binutils-2.26-1.cfg ->
|
|
sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.xml
|
|
config: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg
|
|
package: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gcc-4.9.3.tar.bz2 -> sources/gcc-4.9.3.tar.bz2
|
|
downloading: sources/gcc-4.9.3.tar.bz2 - 85.8MB of 85.8MB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/newlib-2.2.0.20150423.tar.gz -> sources/newlib-2.2.0.20150423.tar.gz
|
|
downloading: sources/newlib-2.2.0.20150423.tar.gz - 16.7MB of 16.7MB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpfr-3.0.1.tar.bz2 -> sources/mpfr-3.0.1.tar.bz2
|
|
downloading: sources/mpfr-3.0.1.tar.bz2 - 1.1MB of 1.1MB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpc-0.8.2.tar.gz -> sources/mpc-0.8.2.tar.gz
|
|
downloading: sources/mpc-0.8.2.tar.gz - 535.5kB of 535.5kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gmp-5.0.5.tar.bz2 -> sources/gmp-5.0.5.tar.bz2
|
|
downloading: sources/gmp-5.0.5.tar.bz2 - 2.0MB of 2.0MB (100%)
|
|
building: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
|
|
reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
|
|
sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.txt
|
|
reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
|
|
sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.xml
|
|
config: tools/rtems-gdb-7.9-1.cfg
|
|
package: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz
|
|
downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch -> patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch
|
|
downloading: patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch - 1.9kB of 1.9kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch -> patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch
|
|
downloading: patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch - 827.0 bytes of 827.0 bytes (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch -> patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch
|
|
downloading: patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch - 2.6kB of 2.6kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch -> patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch
|
|
downloading: patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch - 4.9kB of 4.9kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch -> patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch
|
|
downloading: patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch - 871.0 bytes of 871.0 bytes (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch -> patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch
|
|
downloading: patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch - 5.6kB of 5.6kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch -> patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch
|
|
downloading: patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch - 1.0kB of 1.0kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch -> patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch
|
|
downloading: patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch - 3.6kB of 3.6kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch -> patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch
|
|
downloading: patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch - 1.9kB of 1.9kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch -> patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch
|
|
downloading: patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch - 16.0kB of 16.0kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch -> patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch
|
|
downloading: patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch - 14.8kB of 14.8kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch -> patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch
|
|
downloading: patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch - 3.8kB of 3.8kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0013-sim-erc32-Fix-a-few-compiler-warnings.patch-> patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch
|
|
downloading: patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch - 2.2kB of 2.2kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch -> patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch
|
|
downloading: patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch - 9.2kB of 9.2kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch -> patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch
|
|
downloading: patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch - 22.9kB of 22.9kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch -> patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch
|
|
downloading: patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch - 1.5kB of 1.5kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch -> patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch
|
|
downloading: patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch - 5.8kB of 5.8kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch -> patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch
|
|
downloading: patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch - 66.7kB of 66.7kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch -> patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch
|
|
downloading: patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch - 26.1kB of 26.1kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0020-sim-erc32-Updated-documentation.patch -> patches/0020-sim-erc32-Updated-documentation.patch
|
|
downloading: patches/0020-sim-erc32-Updated-documentation.patch - 16.1kB of 16.1kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0021-sim-erc32-Add-data-watchpoint-support.patch -> patches/0021-sim-erc32-Add-data-watchpoint-support.patch
|
|
downloading: patches/0021-sim-erc32-Add-data-watchpoint-support.patch - 10.1kB of 10.1kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch -> patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch
|
|
downloading: patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch - 25.5kB of 25.5kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch -> patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch
|
|
downloading: patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch - 1.3kB of 1.3kB (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff
|
|
downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff
|
|
downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%)
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/patch-gdb-python-python-config.py -> patches/patch-gdb-python-python-config.py
|
|
downloading: patches/patch-gdb-python-python-config.py - 449.0 bytes of 449.0 bytes (100%)
|
|
building: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
|
|
reporting: tools/rtems-gdb-7.9-1.cfg ->
|
|
sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.txt
|
|
reporting: tools/rtems-gdb-7.9-1.cfg ->
|
|
sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.xml
|
|
config: tools/rtems-tools-4.11-1.cfg
|
|
package: rtems-tools-4.11.0-1
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-tools-4.11.0.tar.xz -> sources/rtems-tools-4.11.0.tar.xz
|
|
downloading: sources/rtems-tools-4.11.0.tar.xz - 1.6MB of 1.6MB (100%)
|
|
building: rtems-tools-4.11.0-1
|
|
reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.txt
|
|
reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.xml
|
|
config: tools/rtems-kernel-4.11.cfg
|
|
package: sparc-rtems4.11-kernel-4.11.0-1
|
|
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-4.11.0.tar.xz -> sources/rtems-4.11.0.tar.xz
|
|
downloading: sources/rtems-4.11.0.tar.xz - 9.3MB of 9.3MB (100%)
|
|
building: sparc-rtems4.11-kernel-4.11.0-1
|
|
reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.txt
|
|
reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.xml
|
|
installing: expat-2.1.0-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
|
|
installing: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
|
|
installing: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
|
|
installing: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
|
|
installing: rtems-tools-4.11.0-1 -> /opt/work/rtems/4.11.0
|
|
installing: sparc-rtems4.11-kernel-4.11.0-1 -> /opt/work/rtems/4.11.0
|
|
cleaning: expat-2.1.0-x86_64-freebsd10.1-1
|
|
cleaning: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
|
|
cleaning: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
|
|
cleaning: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
|
|
cleaning: rtems-tools-4.11.0-1
|
|
cleaning: sparc-rtems4.11-kernel-4.11.0-1
|
|
Build Set: Time 0:19:15.713662
|
|
|
|
You can now build a 3rd party library or an application as defaulted in TBD.
|