rtems/rtems-docs
1
0
Fork 0
mirror of https://git.rtems.org/rtems-docs/ synced 2025-06-09 13:11:52 +08:00
Code Issues Packages Projects Releases Wiki Activity
rtems-docs/c_user/semaphore_manager.rst
Amar Takhar d389819eea Convert all Unicode to ASCII(128)
2016-05-02 20:51:24 -04:00

927 lines
34 KiB
ReStructuredText
Raw Blame History

Semaphore Manager
#################
.. index:: semaphores
.. index:: binary semaphores
.. index:: counting semaphores
.. index:: mutual exclusion
Introduction
============
The semaphore manager utilizes standard Dijkstra
counting semaphores to provide synchronization and mutual
exclusion capabilities. The directives provided by the
semaphore manager are:
- ``rtems_semaphore_create`` - Create a semaphore
- ``rtems_semaphore_ident`` - Get ID of a semaphore
- ``rtems_semaphore_delete`` - Delete a semaphore
- ``rtems_semaphore_obtain`` - Acquire a semaphore
- ``rtems_semaphore_release`` - Release a semaphore
- ``rtems_semaphore_flush`` - Unblock all tasks waiting on a semaphore
- ``rtems_semaphore_set_priority`` - Set priority by
scheduler for a semaphore
Background
==========
A semaphore can be viewed as a protected variable
whose value can be modified only with the``rtems_semaphore_create``,``rtems_semaphore_obtain``, and``rtems_semaphore_release`` directives. RTEMS
supports both binary and counting semaphores. A binary semaphore
is restricted to values of zero or one, while a counting
semaphore can assume any non-negative integer value.
A binary semaphore can be used to control access to a
single resource. In particular, it can be used to enforce
mutual exclusion for a critical section in user code. In this
instance, the semaphore would be created with an initial count
of one to indicate that no task is executing the critical
section of code. Upon entry to the critical section, a task
must issue the ``rtems_semaphore_obtain``
directive to prevent other tasks from entering the critical section.
Upon exit from the critical section, the task must issue the``rtems_semaphore_release`` directive to
allow another task to execute the critical section.
A counting semaphore can be used to control access to
a pool of two or more resources. For example, access to three
printers could be administered by a semaphore created with an
initial count of three. When a task requires access to one of
the printers, it issues the ``rtems_semaphore_obtain``
directive to obtain access to a printer. If a printer is not currently
available, the task can wait for a printer to become available or return
immediately. When the task has completed printing, it should
issue the ``rtems_semaphore_release``
directive to allow other tasks access to the printer.
Task synchronization may be achieved by creating a
semaphore with an initial count of zero. One task waits for the
arrival of another task by issuing a ``rtems_semaphore_obtain``
directive when it reaches a synchronization point. The other task
performs a corresponding ``rtems_semaphore_release``
operation when it reaches its synchronization point, thus unblocking
the pending task.
Nested Resource Access
----------------------
Deadlock occurs when a task owning a binary semaphore
attempts to acquire that same semaphore and blocks as result.
Since the semaphore is allocated to a task, it cannot be
deleted. Therefore, the task that currently holds the semaphore
and is also blocked waiting for that semaphore will never
execute again.
RTEMS addresses this problem by allowing the task
holding the binary semaphore to obtain the same binary semaphore
multiple times in a nested manner. Each``rtems_semaphore_obtain`` must be accompanied with a``rtems_semaphore_release``. The semaphore will
only be made available for acquisition by other tasks when the
outermost ``rtems_semaphore_obtain`` is matched with
a ``rtems_semaphore_release``.
Simple binary semaphores do not allow nested access and so can be used for task synchronization.
Priority Inversion
------------------
Priority inversion is a form of indefinite
postponement which is common in multitasking, preemptive
executives with shared resources. Priority inversion occurs
when a high priority tasks requests access to shared resource
which is currently allocated to low priority task. The high
priority task must block until the low priority task releases
the resource. This problem is exacerbated when the low priority
task is prevented from executing by one or more medium priority
tasks. Because the low priority task is not executing, it
cannot complete its interaction with the resource and release
that resource. The high priority task is effectively prevented
from executing by lower priority tasks.
Priority Inheritance
--------------------
Priority inheritance is an algorithm that calls for
the lower priority task holding a resource to have its priority
increased to that of the highest priority task blocked waiting
for that resource. Each time a task blocks attempting to obtain
the resource, the task holding the resource may have its
priority increased.
On SMP configurations, in case the task holding the resource and the task that
blocks attempting to obtain the resource are in different scheduler instances,
the priority of the holder is raised to the pseudo-interrupt priority (priority
boosting). The pseudo-interrupt priority is the highest priority.
RTEMS supports priority inheritance for local, binary
semaphores that use the priority task wait queue blocking
discipline. When a task of higher priority than the task
holding the semaphore blocks, the priority of the task holding
the semaphore is increased to that of the blocking task. When
the task holding the task completely releases the binary
semaphore (i.e. not for a nested release), the holder's priority
is restored to the value it had before any higher priority was
inherited.
The RTEMS implementation of the priority inheritance
algorithm takes into account the scenario in which a task holds
more than one binary semaphore. The holding task will execute
at the priority of the higher of the highest ceiling priority or
at the priority of the highest priority task blocked waiting for
any of the semaphores the task holds. Only when the task
releases ALL of the binary semaphores it holds will its priority
be restored to the normal value.
Priority Ceiling
----------------
Priority ceiling is an algorithm that calls for the
lower priority task holding a resource to have its priority
increased to that of the highest priority task which will EVER
block waiting for that resource. This algorithm addresses the
problem of priority inversion although it avoids the possibility
of changing the priority of the task holding the resource
multiple times. The priority ceiling algorithm will only change
the priority of the task holding the resource a maximum of one
time. The ceiling priority is set at creation time and must be
the priority of the highest priority task which will ever
attempt to acquire that semaphore.
RTEMS supports priority ceiling for local, binary
semaphores that use the priority task wait queue blocking
discipline. When a task of lower priority than the ceiling
priority successfully obtains the semaphore, its priority is
raised to the ceiling priority. When the task holding the task
completely releases the binary semaphore (i.e. not for a nested
release), the holder's priority is restored to the value it had
before any higher priority was put into effect.
The need to identify the highest priority task which
will attempt to obtain a particular semaphore can be a difficult
task in a large, complicated system. Although the priority
ceiling algorithm is more efficient than the priority
inheritance algorithm with respect to the maximum number of task
priority changes which may occur while a task holds a particular
semaphore, the priority inheritance algorithm is more forgiving
in that it does not require this apriori information.
The RTEMS implementation of the priority ceiling
algorithm takes into account the scenario in which a task holds
more than one binary semaphore. The holding task will execute
at the priority of the higher of the highest ceiling priority or
at the priority of the highest priority task blocked waiting for
any of the semaphores the task holds. Only when the task
releases ALL of the binary semaphores it holds will its priority
be restored to the normal value.
Multiprocessor Resource Sharing Protocol
----------------------------------------
The Multiprocessor Resource Sharing Protocol (MrsP) is defined in *A.
Burns and A.J. Wellings, A Schedulability Compatible Multiprocessor Resource
Sharing Protocol - MrsP, Proceedings of the 25th Euromicro Conference on
Real-Time Systems (ECRTS 2013), July 2013*. It is a generalization of the
Priority Ceiling Protocol to SMP systems. Each MrsP semaphore uses a ceiling
priority per scheduler instance. These ceiling priorities can be specified
with ``rtems_semaphore_set_priority()``. A task obtaining or owning a MrsP
semaphore will execute with the ceiling priority for its scheduler instance as
specified by the MrsP semaphore object. Tasks waiting to get ownership of a
MrsP semaphore will not relinquish the processor voluntarily. In case the
owner of a MrsP semaphore gets preempted it can ask all tasks waiting for this
semaphore to help out and temporarily borrow the right to execute on one of
their assigned processors.
Building a Semaphore Attribute Set
----------------------------------
In general, an attribute set is built by a bitwise OR
of the desired attribute components. The following table lists
the set of valid semaphore attributes:
- ``RTEMS_FIFO`` - tasks wait by FIFO (default)
- ``RTEMS_PRIORITY`` - tasks wait by priority
- ``RTEMS_BINARY_SEMAPHORE`` - restrict values to
0 and 1
- ``RTEMS_COUNTING_SEMAPHORE`` - no restriction on values
(default)
- ``RTEMS_SIMPLE_BINARY_SEMAPHORE`` - restrict values to
0 and 1, do not allow nested access, allow deletion of locked semaphore.
- ``RTEMS_NO_INHERIT_PRIORITY`` - do not use priority
inheritance (default)
- ``RTEMS_INHERIT_PRIORITY`` - use priority inheritance
- ``RTEMS_NO_PRIORITY_CEILING`` - do not use priority
ceiling (default)
- ``RTEMS_PRIORITY_CEILING`` - use priority ceiling
- ``RTEMS_NO_MULTIPROCESSOR_RESOURCE_SHARING`` - do not use
Multiprocessor Resource Sharing Protocol (default)
- ``RTEMS_MULTIPROCESSOR_RESOURCE_SHARING`` - use
Multiprocessor Resource Sharing Protocol
- ``RTEMS_LOCAL`` - local semaphore (default)
- ``RTEMS_GLOBAL`` - global semaphore
Attribute values are specifically designed to be
mutually exclusive, therefore bitwise OR and addition operations
are equivalent as long as each attribute appears exactly once in
the component list. An attribute listed as a default is not
required to appear in the attribute list, although it is a good
programming practice to specify default attributes. If all
defaults are desired, the attribute``RTEMS_DEFAULT_ATTRIBUTES`` should be
specified on this call.
This example demonstrates the attribute_set parameter needed to create a
local semaphore with the task priority waiting queue discipline. The
attribute_set parameter passed to the``rtems_semaphore_create`` directive could be either``RTEMS_PRIORITY`` or ``RTEMS_LOCAL |
RTEMS_PRIORITY``. The attribute_set parameter can be set to``RTEMS_PRIORITY`` because ``RTEMS_LOCAL`` is the
default for all created tasks. If a similar semaphore were to be known
globally, then the attribute_set parameter would be``RTEMS_GLOBAL | RTEMS_PRIORITY``.
Some combinatinos of these attributes are invalid. For example, priority
ordered blocking discipline must be applied to a binary semaphore in order
to use either the priority inheritance or priority ceiling functionality.
The following tree figure illustrates the valid combinations.
.. code:: c
Not available in ASCII representation
Building a SEMAPHORE_OBTAIN Option Set
--------------------------------------
In general, an option is built by a bitwise OR of the
desired option components. The set of valid options for the``rtems_semaphore_obtain`` directive are listed
in the following table:
- ``RTEMS_WAIT`` - task will wait for semaphore (default)
- ``RTEMS_NO_WAIT`` - task should not wait
Option values are specifically designed to be mutually exclusive,
therefore bitwise OR and addition operations are equivalent as long as
each attribute appears exactly once in the component list. An option
listed as a default is not required to appear in the list, although it is
a good programming practice to specify default options. If all defaults
are desired, the option ``RTEMS_DEFAULT_OPTIONS`` should be
specified on this call.
This example demonstrates the option parameter needed
to poll for a semaphore. The option parameter passed to the``rtems_semaphore_obtain``
directive should be ``RTEMS_NO_WAIT``.
Operations
==========
Creating a Semaphore
--------------------
The ``rtems_semaphore_create`` directive creates a binary or
counting semaphore with a user-specified name as well as an
initial count. If a binary semaphore is created with a count of
zero (0) to indicate that it has been allocated, then the task
creating the semaphore is considered the current holder of the
semaphore. At create time the method for ordering waiting tasks
in the semaphore's task wait queue (by FIFO or task priority) is
specified. Additionally, the priority inheritance or priority
ceiling algorithm may be selected for local, binary semaphores
that use the priority task wait queue blocking discipline. If
the priority ceiling algorithm is selected, then the highest
priority of any task which will attempt to obtain this semaphore
must be specified. RTEMS allocates a Semaphore Control Block
(SMCB) from the SMCB free list. This data structure is used by
RTEMS to manage the newly created semaphore. Also, a unique
semaphore ID is generated and returned to the calling task.
Obtaining Semaphore IDs
-----------------------
When a semaphore is created, RTEMS generates a unique
semaphore ID and assigns it to the created semaphore until it is
deleted. The semaphore ID may be obtained by either of two
methods. First, as the result of an invocation of the``rtems_semaphore_create`` directive, the
semaphore ID is stored in a user provided location. Second,
the semaphore ID may be obtained later using the``rtems_semaphore_ident`` directive. The semaphore ID is
used by other semaphore manager directives to access this
semaphore.
Acquiring a Semaphore
---------------------
The ``rtems_semaphore_obtain`` directive is used to acquire the
specified semaphore. A simplified version of the``rtems_semaphore_obtain`` directive can be described as follows:
.. code:: c
if semaphore's count is greater than zero
then decrement semaphore's count
else wait for release of semaphore
return SUCCESSFUL
When the semaphore cannot be immediately acquired,
one of the following situations applies:
- By default, the calling task will wait forever to
acquire the semaphore.
- Specifying ``RTEMS_NO_WAIT`` forces an immediate return
with an error status code.
- Specifying a timeout limits the interval the task will
wait before returning with an error status code.
If the task waits to acquire the semaphore, then it
is placed in the semaphore's task wait queue in either FIFO or
task priority order. If the task blocked waiting for a binary
semaphore using priority inheritance and the task's priority is
greater than that of the task currently holding the semaphore,
then the holding task will inherit the priority of the blocking
task. All tasks waiting on a semaphore are returned an error
code when the semaphore is deleted.
When a task successfully obtains a semaphore using
priority ceiling and the priority ceiling for this semaphore is
greater than that of the holder, then the holder's priority will
be elevated.
Releasing a Semaphore
---------------------
The ``rtems_semaphore_release`` directive is used to release
the specified semaphore. A simplified version of the``rtems_semaphore_release`` directive can be described as
follows:
.. code:: c
if no tasks are waiting on this semaphore
then increment semaphore's count
else assign semaphore to a waiting task
return SUCCESSFUL
If this is the outermost release of a binary
semaphore that uses priority inheritance or priority ceiling and
the task does not currently hold any other binary semaphores,
then the task performing the ``rtems_semaphore_release``
will have its priority restored to its normal value.
Deleting a Semaphore
--------------------
The ``rtems_semaphore_delete`` directive removes a semaphore
from the system and frees its control block. A semaphore can be
deleted by any local task that knows the semaphore's ID. As a
result of this directive, all tasks blocked waiting to acquire
the semaphore will be readied and returned a status code which
indicates that the semaphore was deleted. Any subsequent
references to the semaphore's name and ID are invalid.
Directives
==========
This section details the semaphore manager's
directives. A subsection is dedicated to each of this manager's
directives and describes the calling sequence, related
constants, usage, and status codes.
SEMAPHORE_CREATE - Create a semaphore
-------------------------------------
.. index:: create a semaphore
**CALLING SEQUENCE:**
.. index:: rtems_semaphore_create
.. code:: c
rtems_status_code rtems_semaphore_create(
rtems_name name,
uint32_t count,
rtems_attribute attribute_set,
rtems_task_priority priority_ceiling,
rtems_id \*id
);
**DIRECTIVE STATUS CODES:**
``RTEMS_SUCCESSFUL`` - semaphore created successfully
``RTEMS_INVALID_NAME`` - invalid semaphore name
``RTEMS_INVALID_ADDRESS`` - ``id`` is NULL
``RTEMS_TOO_MANY`` - too many semaphores created
``RTEMS_NOT_DEFINED`` - invalid attribute set
``RTEMS_INVALID_NUMBER`` - invalid starting count for binary semaphore
``RTEMS_MP_NOT_CONFIGURED`` - multiprocessing not configured
``RTEMS_TOO_MANY`` - too many global objects
**DESCRIPTION:**
This directive creates a semaphore which resides on
the local node. The created semaphore has the user-defined name
specified in name and the initial count specified in count. For
control and maintenance of the semaphore, RTEMS allocates and
initializes a SMCB. The RTEMS-assigned semaphore id is returned
in id. This semaphore id is used with other semaphore related
directives to access the semaphore.
Specifying PRIORITY in attribute_set causes tasks
waiting for a semaphore to be serviced according to task
priority. When FIFO is selected, tasks are serviced in First
In-First Out order.
**NOTES:**
This directive will not cause the calling task to be
preempted.
The priority inheritance and priority ceiling
algorithms are only supported for local, binary semaphores that
use the priority task wait queue blocking discipline.
The following semaphore attribute constants are
defined by RTEMS:
- ``RTEMS_FIFO`` - tasks wait by FIFO (default)
- ``RTEMS_PRIORITY`` - tasks wait by priority
- ``RTEMS_BINARY_SEMAPHORE`` - restrict values to
0 and 1
- ``RTEMS_COUNTING_SEMAPHORE`` - no restriction on values
(default)
- ``RTEMS_SIMPLE_BINARY_SEMAPHORE`` - restrict values to
0 and 1, block on nested access, allow deletion of locked semaphore.
- ``RTEMS_NO_INHERIT_PRIORITY`` - do not use priority
inheritance (default)
- ``RTEMS_INHERIT_PRIORITY`` - use priority inheritance
- ``RTEMS_NO_PRIORITY_CEILING`` - do not use priority
ceiling (default)
- ``RTEMS_PRIORITY_CEILING`` - use priority ceiling
- ``RTEMS_NO_MULTIPROCESSOR_RESOURCE_SHARING`` - do not use
Multiprocessor Resource Sharing Protocol (default)
- ``RTEMS_MULTIPROCESSOR_RESOURCE_SHARING`` - use
Multiprocessor Resource Sharing Protocol
- ``RTEMS_LOCAL`` - local semaphore (default)
- ``RTEMS_GLOBAL`` - global semaphore
Semaphores should not be made global unless remote
tasks must interact with the created semaphore. This is to
avoid the system overhead incurred by the creation of a global
semaphore. When a global semaphore is created, the semaphore's
name and id must be transmitted to every node in the system for
insertion in the local copy of the global object table.
Note that some combinations of attributes are not valid. See the
earlier discussion on this.
The total number of global objects, including semaphores, is limited by
the maximum_global_objects field in the Configuration Table.
It is not allowed to create an initially locked MrsP semaphore and the``RTEMS_INVALID_NUMBER`` status code will be returned on SMP
configurations in this case. This prevents lock order reversal problems with
the allocator mutex.
SEMAPHORE_IDENT - Get ID of a semaphore
---------------------------------------
.. index:: get ID of a semaphore
.. index:: obtain ID of a semaphore
**CALLING SEQUENCE:**
.. index:: rtems_semaphore_ident
.. code:: c
rtems_status_code rtems_semaphore_ident(
rtems_name name,
uint32_t node,
rtems_id \*id
);
**DIRECTIVE STATUS CODES:**
``RTEMS_SUCCESSFUL`` - semaphore identified successfully
``RTEMS_INVALID_NAME`` - semaphore name not found
``RTEMS_INVALID_NODE`` - invalid node id
**DESCRIPTION:**
This directive obtains the semaphore id associated
with the semaphore name. If the semaphore name is not unique,
then the semaphore id will match one of the semaphores with that
name. However, this semaphore id is not guaranteed to
correspond to the desired semaphore. The semaphore id is used
by other semaphore related directives to access the semaphore.
**NOTES:**
This directive will not cause the running task to be
preempted.
If node is ``RTEMS_SEARCH_ALL_NODES``, all nodes are searched
with the local node being searched first. All other nodes are
searched with the lowest numbered node searched first.
If node is a valid node number which does not
represent the local node, then only the semaphores exported by
the designated node are searched.
This directive does not generate activity on remote
nodes. It accesses only the local copy of the global object
table.
SEMAPHORE_DELETE - Delete a semaphore
-------------------------------------
.. index:: delete a semaphore
**CALLING SEQUENCE:**
.. index:: rtems_semaphore_delete
.. code:: c
rtems_status_code rtems_semaphore_delete(
rtems_id id
);
**DIRECTIVE STATUS CODES:**
``RTEMS_SUCCESSFUL`` - semaphore deleted successfully
``RTEMS_INVALID_ID`` - invalid semaphore id
``RTEMS_RESOURCE_IN_USE`` - binary semaphore is in use
``RTEMS_ILLEGAL_ON_REMOTE_OBJECT`` - cannot delete remote semaphore
**DESCRIPTION:**
This directive deletes the semaphore specified by ``id``.
All tasks blocked waiting to acquire the semaphore will be
readied and returned a status code which indicates that the
semaphore was deleted. The SMCB for this semaphore is reclaimed
by RTEMS.
**NOTES:**
The calling task will be preempted if it is enabled
by the task's execution mode and a higher priority local task is
waiting on the deleted semaphore. The calling task will NOT be
preempted if all of the tasks that are waiting on the semaphore
are remote tasks.
The calling task does not have to be the task that
created the semaphore. Any local task that knows the semaphore
id can delete the semaphore.
When a global semaphore is deleted, the semaphore id
must be transmitted to every node in the system for deletion
from the local copy of the global object table.
The semaphore must reside on the local node, even if
the semaphore was created with the ``RTEMS_GLOBAL`` option.
Proxies, used to represent remote tasks, are
reclaimed when the semaphore is deleted.
SEMAPHORE_OBTAIN - Acquire a semaphore
--------------------------------------
.. index:: obtain a semaphore
.. index:: lock a semaphore
**CALLING SEQUENCE:**
.. index:: rtems_semaphore_obtain
.. code:: c
rtems_status_code rtems_semaphore_obtain(
rtems_id id,
rtems_option option_set,
rtems_interval timeout
);
**DIRECTIVE STATUS CODES:**
``RTEMS_SUCCESSFUL`` - semaphore obtained successfully
``RTEMS_UNSATISFIED`` - semaphore not available
``RTEMS_TIMEOUT`` - timed out waiting for semaphore
``RTEMS_OBJECT_WAS_DELETED`` - semaphore deleted while waiting
``RTEMS_INVALID_ID`` - invalid semaphore id
**DESCRIPTION:**
This directive acquires the semaphore specified by
id. The ``RTEMS_WAIT`` and ``RTEMS_NO_WAIT`` components of the options parameter
indicate whether the calling task wants to wait for the
semaphore to become available or return immediately if the
semaphore is not currently available. With either ``RTEMS_WAIT`` or``RTEMS_NO_WAIT``, if the current semaphore count is positive, then it is
decremented by one and the semaphore is successfully acquired by
returning immediately with a successful return code.
If the calling task chooses to return immediately and the current
semaphore count is zero or negative, then a status code is returned
indicating that the semaphore is not available. If the calling task
chooses to wait for a semaphore and the current semaphore count is zero or
negative, then it is decremented by one and the calling task is placed on
the semaphore's wait queue and blocked. If the semaphore was created with
the ``RTEMS_PRIORITY`` attribute, then the calling task is
inserted into the queue according to its priority. However, if the
semaphore was created with the ``RTEMS_FIFO`` attribute, then
the calling task is placed at the rear of the wait queue. If the binary
semaphore was created with the ``RTEMS_INHERIT_PRIORITY``
attribute, then the priority of the task currently holding the binary
semaphore is guaranteed to be greater than or equal to that of the
blocking task. If the binary semaphore was created with the``RTEMS_PRIORITY_CEILING`` attribute, a task successfully
obtains the semaphore, and the priority of that task is greater than the
ceiling priority for this semaphore, then the priority of the task
obtaining the semaphore is elevated to that of the ceiling.
The timeout parameter specifies the maximum interval the calling task is
willing to be blocked waiting for the semaphore. If it is set to``RTEMS_NO_TIMEOUT``, then the calling task will wait forever.
If the semaphore is available or the ``RTEMS_NO_WAIT`` option
component is set, then timeout is ignored.
Deadlock situations are detected for MrsP semaphores and the``RTEMS_UNSATISFIED`` status code will be returned on SMP
configurations in this case.
**NOTES:**
The following semaphore acquisition option constants
are defined by RTEMS:
- ``RTEMS_WAIT`` - task will wait for semaphore (default)
- ``RTEMS_NO_WAIT`` - task should not wait
Attempting to obtain a global semaphore which does not reside on the local
node will generate a request to the remote node to access the semaphore.
If the semaphore is not available and ``RTEMS_NO_WAIT`` was
not specified, then the task must be blocked until the semaphore is
released. A proxy is allocated on the remote node to represent the task
until the semaphore is released.
A clock tick is required to support the timeout functionality of
this directive.
It is not allowed to obtain a MrsP semaphore more than once by one task at a
time (nested access) and the ``RTEMS_UNSATISFIED`` status code will
be returned on SMP configurations in this case.
SEMAPHORE_RELEASE - Release a semaphore
---------------------------------------
.. index:: release a semaphore
.. index:: unlock a semaphore
**CALLING SEQUENCE:**
.. index:: rtems_semaphore_release
.. code:: c
rtems_status_code rtems_semaphore_release(
rtems_id id
);
**DIRECTIVE STATUS CODES:**
``RTEMS_SUCCESSFUL`` - semaphore released successfully
``RTEMS_INVALID_ID`` - invalid semaphore id
``RTEMS_NOT_OWNER_OF_RESOURCE`` - calling task does not own semaphore
``RTEMS_INCORRECT_STATE`` - invalid unlock order
**DESCRIPTION:**
This directive releases the semaphore specified by
id. The semaphore count is incremented by one. If the count is
zero or negative, then the first task on this semaphore's wait
queue is removed and unblocked. The unblocked task may preempt
the running task if the running task's preemption mode is
enabled and the unblocked task has a higher priority than the
running task.
**NOTES:**
The calling task may be preempted if it causes a
higher priority task to be made ready for execution.
Releasing a global semaphore which does not reside on
the local node will generate a request telling the remote node
to release the semaphore.
If the task to be unblocked resides on a different
node from the semaphore, then the semaphore allocation is
forwarded to the appropriate node, the waiting task is
unblocked, and the proxy used to represent the task is reclaimed.
The outermost release of a local, binary, priority
inheritance or priority ceiling semaphore may result in the
calling task having its priority lowered. This will occur if
the calling task holds no other binary semaphores and it has
inherited a higher priority.
The MrsP semaphores must be released in the reversed obtain order, otherwise
the ``RTEMS_INCORRECT_STATE`` status code will be returned on SMP
configurations in this case.
SEMAPHORE_FLUSH - Unblock all tasks waiting on a semaphore
----------------------------------------------------------
.. index:: flush a semaphore
.. index:: unblock all tasks waiting on a semaphore
**CALLING SEQUENCE:**
.. index:: rtems_semaphore_flush
.. code:: c
rtems_status_code rtems_semaphore_flush(
rtems_id id
);
**DIRECTIVE STATUS CODES:**
``RTEMS_SUCCESSFUL`` - semaphore released successfully
``RTEMS_INVALID_ID`` - invalid semaphore id
``RTEMS_NOT_DEFINED`` - operation not defined for the protocol of
the semaphore
``RTEMS_ILLEGAL_ON_REMOTE_OBJECT`` - not supported for remote semaphores
**DESCRIPTION:**
This directive unblocks all tasks waiting on the semaphore specified by
id. Since there are tasks blocked on the semaphore, the semaphore's
count is not changed by this directive and thus is zero before and
after this directive is executed. Tasks which are unblocked as the
result of this directive will return from the``rtems_semaphore_obtain`` directive with a
status code of ``RTEMS_UNSATISFIED`` to indicate
that the semaphore was not obtained.
This directive may unblock any number of tasks. Any of the unblocked
tasks may preempt the running task if the running task's preemption mode is
enabled and an unblocked task has a higher priority than the
running task.
**NOTES:**
The calling task may be preempted if it causes a
higher priority task to be made ready for execution.
If the task to be unblocked resides on a different
node from the semaphore, then the waiting task is
unblocked, and the proxy used to represent the task is reclaimed.
It is not allowed to flush a MrsP semaphore and the``RTEMS_NOT_DEFINED`` status code will be returned on SMP
configurations in this case.
SEMAPHORE_SET_PRIORITY - Set priority by scheduler for a semaphore
------------------------------------------------------------------
.. index:: set priority by scheduler for a semaphore
**CALLING SEQUENCE:**
.. index:: rtems_semaphore_set_priority
.. code:: c
rtems_status_code rtems_semaphore_set_priority(
rtems_id semaphore_id,
rtems_id scheduler_id,
rtems_task_priority new_priority,
rtems_task_priority \*old_priority
);
**DIRECTIVE STATUS CODES:**
``RTEMS_SUCCESSFUL`` - successful operation
``RTEMS_INVALID_ID`` - invalid semaphore or scheduler id
``RTEMS_INVALID_ADDRESS`` - ``old_priority`` is NULL
``RTEMS_INVALID_PRIORITY`` - invalid new priority value
``RTEMS_NOT_DEFINED`` - operation not defined for the protocol of
the semaphore
``RTEMS_ILLEGAL_ON_REMOTE_OBJECT`` - not supported for remote semaphores
**DESCRIPTION:**
This directive sets the priority value with respect to the specified scheduler
of a semaphore.
The special priority value ``RTEMS_CURRENT_PRIORITY`` can be used to get the
current priority value without changing it.
The interpretation of the priority value depends on the protocol of the
semaphore object.
- The Multiprocessor Resource Sharing Protocol needs a ceiling priority per
scheduler instance. This operation can be used to specify these priority
values.
- For the Priority Ceiling Protocol the ceiling priority is used with this
operation.
- For other protocols this operation is not defined.
**EXAMPLE:**
.. code:: c
#include <assert.h>
#include <stdlib.h>
#include <rtems.h>
#define SCHED_A rtems_build_name(' ', ' ', ' ', 'A')
#define SCHED_B rtems_build_name(' ', ' ', ' ', 'B')
static void Init(rtems_task_argument arg)
{
rtems_status_code sc;
rtems_id semaphore_id;
rtems_id scheduler_a_id;
rtems_id scheduler_b_id;
rtems_task_priority prio;
/* Get the scheduler identifiers \*/
sc = rtems_scheduler_ident(SCHED_A, &scheduler_a_id);
assert(sc == RTEMS_SUCCESSFUL);
sc = rtems_scheduler_ident(SCHED_B, &scheduler_b_id);
assert(sc == RTEMS_SUCCESSFUL);
/* Create a MrsP semaphore object \*/
sc = rtems_semaphore_create(
rtems_build_name('M', 'R', 'S', 'P'),
1,
RTEMS_MULTIPROCESSOR_RESOURCE_SHARING
| RTEMS_BINARY_SEMAPHORE,
1,
&semaphore_id
);
assert(sc == RTEMS_SUCCESSFUL);
/*
* The ceiling priority values per scheduler are equal to the value specified
* for object creation.
\*/
prio = RTEMS_CURRENT_PRIORITY;
sc = rtems_semaphore_set_priority(semaphore_id, scheduler_a_id, prio, &prio);
assert(sc == RTEMS_SUCCESSFUL);
assert(prio == 1);
/* Check the old value and set a new ceiling priority for scheduler B \*/
prio = 2;
sc = rtems_semaphore_set_priority(semaphore_id, scheduler_b_id, prio, &prio);
assert(sc == RTEMS_SUCCESSFUL);
assert(prio == 1);
/* Check the ceiling priority values \*/
prio = RTEMS_CURRENT_PRIORITY;
sc = rtems_semaphore_set_priority(semaphore_id, scheduler_a_id, prio, &prio);
assert(sc == RTEMS_SUCCESSFUL);
assert(prio == 1);
prio = RTEMS_CURRENT_PRIORITY;
sc = rtems_semaphore_set_priority(semaphore_id, scheduler_b_id, prio, &prio);
assert(sc == RTEMS_SUCCESSFUL);
assert(prio == 2);
sc = rtems_semaphore_delete(semaphore_id);
assert(sc == RTEMS_SUCCESSFUL);
exit(0);
}
#define CONFIGURE_SMP_APPLICATION
#define CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
#define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
#define CONFIGURE_MAXIMUM_TASKS 1
#define CONFIGURE_MAXIMUM_SEMAPHORES 1
#define CONFIGURE_MAXIMUM_MRSP_SEMAPHORES 1
#define CONFIGURE_SMP_MAXIMUM_PROCESSORS 2
#define CONFIGURE_SCHEDULER_SIMPLE_SMP
#include <rtems/scheduler.h>
RTEMS_SCHEDULER_CONTEXT_SIMPLE_SMP(a);
RTEMS_SCHEDULER_CONTEXT_SIMPLE_SMP(b);
#define CONFIGURE_SCHEDULER_CONTROLS \\
RTEMS_SCHEDULER_CONTROL_SIMPLE_SMP(a, SCHED_A), \\
RTEMS_SCHEDULER_CONTROL_SIMPLE_SMP(b, SCHED_B)
#define CONFIGURE_SMP_SCHEDULER_ASSIGNMENTS \\
RTEMS_SCHEDULER_ASSIGN(0, RTEMS_SCHEDULER_ASSIGN_PROCESSOR_MANDATORY), \\
RTEMS_SCHEDULER_ASSIGN(1, RTEMS_SCHEDULER_ASSIGN_PROCESSOR_MANDATORY)
#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
#define CONFIGURE_INIT
#include <rtems/confdefs.h>
.. COMMENT: COPYRIGHT (c) 1988-2007.
.. COMMENT: On-Line Applications Research Corporation (OAR).
.. COMMENT: All rights reserved.
Reference in New Issue View Git Blame Copy Permalink