rtems/rtems-libbsd
1
0
Fork 0
mirror of https://git.rtems.org/rtems-libbsd/ synced 2025-10-14 18:41:59 +08:00
Code Issues Packages Projects Releases Wiki Activity

Return the default TX and RX hardware checksum for the Cadence driver to off.

Browse Source 
The hardware support does not seem to work with qemu. The support can be
enabled with ifconfig or via ioctl on real hardware to get the
performance boost.
This commit is contained in:
Chris Johns
2015-06-19 17:35:06 +10:00
parent 59bc7c1f5f
commit 54fb9f01f8
2 changed files with 20 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

19
freebsd/sys/dev/cadence/if_cgem.c
View File

@@ -329,7 +329,7 @@ cgem_rx_filter(struct cgem_softc *sc)
net_cfg = RD4(sc, CGEM_NET_CFG);
net_cfg &= ~(CGEM_NET_CFG_MULTI_HASH_EN |
CGEM_NET_CFG_NO_BCAST |
CGEM_NET_CFG_NO_BCAST |
CGEM_NET_CFG_COPY_ALL);
if ((ifp->if_flags & IFF_PROMISC) != 0)
@@ -462,7 +462,7 @@ cgem_setup_descs(struct cgem_softc *sc)
err = bus_dmamap_load(sc->desc_dma_tag, sc->txring_dma_map,
(void *)sc->txring,
CGEM_NUM_TX_DESCS*sizeof(struct cgem_tx_desc),
cgem_getaddr, &sc->txring_physaddr,
cgem_getaddr, &sc->txring_physaddr,
BUS_DMA_NOWAIT);
if (err)
return (err);
@@ -514,7 +514,7 @@ cgem_fill_rqueue(struct cgem_softc *sc)
#ifndef __rtems__
/* Load map and plug in physical address. */
if (bus_dmamap_load_mbuf_sg(sc->mbuf_dma_tag,
if (bus_dmamap_load_mbuf_sg(sc->mbuf_dma_tag,
sc->rxring_m_dmamap[sc->rxring_hd_ptr], m,
segs, &nsegs, BUS_DMA_NOWAIT)) {
sc->rxdmamapfails++;
@@ -542,7 +542,7 @@ cgem_fill_rqueue(struct cgem_softc *sc)
sc->rxring_hd_ptr = 0;
} else
sc->rxring[sc->rxring_hd_ptr++].addr = segs[0].ds_addr;
sc->rxring_queued++;
}
}
@@ -1129,7 +1129,7 @@ cgem_config(struct cgem_softc *sc)
/* Write the rx and tx descriptor ring addresses to the QBAR regs. */
WR4(sc, CGEM_RX_QBAR, (uint32_t) sc->rxring_physaddr);
WR4(sc, CGEM_TX_QBAR, (uint32_t) sc->txring_physaddr);
/* Enable rx and tx. */
sc->net_ctl_shadow |= (CGEM_NET_CTRL_TX_EN | CGEM_NET_CTRL_RX_EN);
WR4(sc, CGEM_NET_CTRL, sc->net_ctl_shadow);
@@ -1323,7 +1323,7 @@ cgem_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
~CGEM_NET_CFG_RX_CHKSUM_OFFLD_EN);
}
}
if ((ifp->if_capenable & (IFCAP_RXCSUM | IFCAP_TXCSUM)) ==
if ((ifp->if_capenable & (IFCAP_RXCSUM | IFCAP_TXCSUM)) ==
(IFCAP_RXCSUM | IFCAP_TXCSUM))
ifp->if_capenable |= IFCAP_VLAN_HWCSUM;
else
@@ -1423,7 +1423,7 @@ cgem_miibus_writereg(device_t dev, int phy, int reg, int data)
{
struct cgem_softc *sc = device_get_softc(dev);
int tries;
WR4(sc, CGEM_PHY_MAINT,
CGEM_PHY_MAINT_CLAUSE_22 | CGEM_PHY_MAINT_MUST_10 |
CGEM_PHY_MAINT_OP_WRITE |
@@ -1778,15 +1778,10 @@ cgem_attach(device_t dev)
ifp->if_init = cgem_init;
ifp->if_capabilities |= IFCAP_HWCSUM | IFCAP_HWCSUM_IPV6 |
IFCAP_VLAN_MTU | IFCAP_VLAN_HWCSUM;
#ifndef __rtems__
/* Disable hardware checksumming by default. */
ifp->if_hwassist = 0;
ifp->if_capenable = ifp->if_capabilities &
~(IFCAP_HWCSUM | IFCAP_HWCSUM_IPV6 | IFCAP_VLAN_HWCSUM);
#else /* __rtems__ */
ifp->if_hwassist = CGEM_CKSUM_ASSIST;
ifp->if_capenable = ifp->if_capabilities;
#endif /* __rtems__ */
ifp->if_snd.ifq_drv_maxlen = CGEM_NUM_TX_DESCS;
IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen);
IFQ_SET_READY(&ifp->if_snd);