Update the host frame interval after a device connection. Select also
the FS/LS PHY clock. It is not clear if this works on all platforms.
Update #3910.
Some targets support only flushing or invalidating complete cache lines.
In this cases misaligned buffers might lead to unexpected results. This
patch adds a flag that allows drivers to signal to the bus dma driver
that it is OK to round a buffer to the next full cache line. That's for
example necessary if a driver wants to send out 14 byte via a USB DMA.
Only the driver knows whether these 14 bytes are located in an otherwise
unused cache line aligned buffer.
There is a bug in the #ifdef regarding FDT so this file hasn't been
compiled. If that bug is solved, the driver doesn't work for some other
reason.
With the FDT-bug the driver hasn't been used by anyone. So just remove
it again.
- Update imported files to compile rtems-libbsd for i386 based BSPs
- Mostly commenting out parts which create compile or link errors in
RTEMS, but aren't needed
This is not a nice solution but it should work on all chips. As soon as
FreeBSD has a nice solution via the USB PHY driver, this should be
replaced.
Update #3869.
The rtems_bsd_mmcsd_attach_worker acquired the bus without releasing it.
If a MMC device has multiple hardware partitions (like eMMC which
typically has at least one boot partition) the
rtems_bsd_mmcsd_attach_worker would try to acquire the bus multiple
times. This doesn't work.
Doing it right would mean to acquire and release the bus for each
access which would have an performance impact. Beneath that it would
mean that partition switching has to be supported by the RTEMS code too.
There is currently no known use case where the access would be
necessary. Therefore this patch prefers the performance and just avoids
all further hardware partitions.
Git mirror commit 59f44d20be3f99d181ca742e636d45fc39ec982b.
This commit updates OpenSSL to version 1.1.1. This required an update
of racoon which uses some internal stuff from OpenSSL and seems to be
mostly unmaintained, e.g. there is update in the FreeBSD ports to cope
with OpenSSL 1.1.1.
Update #3472.
The USB_BUS_SPIN_LOCK() is only used internally to the bus driver.
Replace the mutex with an interrupt disable/enable section. Execute the
interrupt filter in a real interrupt context and forward the interrupt
handler to the interrupt server if necessary.
