mirror of
https://git.rtems.org/rtems-libbsd/
synced 2025-05-14 07:29:25 +08:00
275 lines
7.6 KiB
C
275 lines
7.6 KiB
C
/*
|
|
* Copyright (c) 2009-2013 embedded brains GmbH. All rights reserved.
|
|
*
|
|
* embedded brains GmbH
|
|
* Dornierstr. 4
|
|
* 82178 Puchheim
|
|
* Germany
|
|
* <rtems@embedded-brains.de>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <machine/rtems-bsd-kernel-space.h>
|
|
#include <machine/rtems-bsd-support.h>
|
|
|
|
#include <bsp.h>
|
|
|
|
#if defined(__GEN83xx_BSP_h) || defined(LIBBSP_POWERPC_QORIQ_BSP_H)
|
|
|
|
#include <bsp/irq.h>
|
|
#include <bsp/utility.h>
|
|
|
|
#ifdef __GEN83xx_BSP_h
|
|
#include <mpc83xx/mpc83xx.h>
|
|
#define BSP_EHCI_REGISTER_BASE_ADDR ((unsigned) &mpc83xx.usb_dr.caplength)
|
|
#define BSP_EHCI_IRQ_VECTOR BSP_IPIC_IRQ_USB_DR
|
|
#endif
|
|
|
|
#ifdef LIBBSP_POWERPC_QORIQ_BSP_H
|
|
#include <bsp/qoriq.h>
|
|
#define BSP_EHCI_REGISTER_BASE_ADDR ((unsigned) &qoriq.usb_1 + 0x100)
|
|
#define BSP_EHCI_IRQ_VECTOR QORIQ_IRQ_USB_1
|
|
#endif
|
|
|
|
#include <sys/cdefs.h>
|
|
#include <sys/stdint.h>
|
|
#include <sys/stddef.h>
|
|
#include <rtems/bsd/sys/param.h>
|
|
#include <sys/queue.h>
|
|
#include <rtems/bsd/sys/types.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/linker_set.h>
|
|
#include <sys/module.h>
|
|
#include <rtems/bsd/sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/sx.h>
|
|
#include <rtems/bsd/sys/unistd.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/priv.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
|
|
#include <dev/usb/usb_core.h>
|
|
#include <dev/usb/usb_busdma.h>
|
|
#include <dev/usb/usb_process.h>
|
|
#include <dev/usb/usb_util.h>
|
|
|
|
#include <dev/usb/usb_controller.h>
|
|
#include <dev/usb/usb_bus.h>
|
|
#include <dev/usb/controller/ehci.h>
|
|
|
|
static device_probe_t ehci_mpc83xx_probe;
|
|
static device_attach_t ehci_mpc83xx_attach;
|
|
static device_detach_t ehci_mpc83xx_detach;
|
|
|
|
static int
|
|
ehci_mpc83xx_probe(device_t self)
|
|
{
|
|
device_set_desc(self, "EHCI");
|
|
|
|
return (0);
|
|
}
|
|
|
|
#define CONTROL_ULPI_INT_EN BSP_BBIT32(31)
|
|
#define CONTROL_WU_INT_EN BSP_BBIT32(30)
|
|
#define CONTROL_USB_EN BSP_BBIT32(29)
|
|
#define CONTROL_LSF_EN BSP_BBIT32(28)
|
|
#define CONTROL_KEEP_OTG_ON BSP_BBIT32(27)
|
|
#define CONTROL_OTG_PORT BSP_BBIT32(26)
|
|
#define CONTROL_REFSEL(val) BSP_BFLD32(val, 24, 25)
|
|
#define CONTROL_PLL_RESET BSP_BBIT32(23)
|
|
#define CONTROL_UTMI_PHY_EN BSP_BBIT32(22)
|
|
#define CONTROL_PHY_CLOCK_SEL BSP_BBIT32(21)
|
|
#define CONTROL_CLKIN_SEL(val) BSP_BFLD32(val, 19, 20)
|
|
#define CONTROL_WU_INT BSP_BBIT32(15)
|
|
#define CONTROL_PHY_CLK_VALID BSP_BBIT32(14)
|
|
|
|
static void
|
|
ehci_mpc83xx_phy_init(void)
|
|
{
|
|
#ifdef __GEN83xx_BSP_h
|
|
volatile uint32_t *control = &mpc83xx.usb_dr.control;
|
|
|
|
*control = CONTROL_PLL_RESET | CONTROL_REFSEL(0x2U);
|
|
*control = CONTROL_UTMI_PHY_EN | CONTROL_REFSEL(0x2U);
|
|
|
|
while ((*control & CONTROL_PHY_CLK_VALID) == 0) {
|
|
/* Wait for PLL */
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#define USBMODE_SDIS BSP_BIT32(4)
|
|
#define USBMODE_SLOM BSP_BIT32(3)
|
|
#define USBMODE_CM_IDLE BSP_FLD32(0x0, 0, 1)
|
|
#define USBMODE_CM_DEVICE BSP_FLD32(0x2, 0, 1)
|
|
#define USBMODE_CM_HOST BSP_FLD32(0x3, 0, 1)
|
|
|
|
#define PORTSC_PTS(val) BSP_FLD32(val, 30, 31)
|
|
#define PORTSC_PTS_UTMI PORTSC_PTS(0x0)
|
|
#define PORTSC_PTS_ULPI PORTSC_PTS(0x2)
|
|
#define PORTSC_PE BSP_BIT32(2)
|
|
|
|
#define SNOOP_ADDR(val) BSP_BFLD32(val, 0, 19)
|
|
#define SNOOP_ENABLE(val) BSP_BFLD32(val, 27, 31)
|
|
#define SNOOP_SIZE_2GB SNOOP_ENABLE(0x1e)
|
|
|
|
static void
|
|
ehci_mpc83xx_host_init(void)
|
|
{
|
|
#ifdef __GEN83xx_BSP_h
|
|
mpc83xx.usb_dr.snoop1 = SNOOP_ADDR(0x0) | SNOOP_SIZE_2GB;
|
|
mpc83xx.usb_dr.snoop2 = SNOOP_ADDR(0x80000) | SNOOP_SIZE_2GB;
|
|
mpc83xx.usb_dr.control = CONTROL_UTMI_PHY_EN | CONTROL_REFSEL(0x2) | CONTROL_USB_EN;
|
|
mpc83xx.usb_dr.portsc1 = htole32(PORTSC_PTS_UTMI);
|
|
#if 0
|
|
mpc83xx.usb_dr.pri_ctrl = 0xcU;
|
|
mpc83xx.usb_dr.age_cnt_thresh = 0x40U;
|
|
mpc83xx.usb_dr.si_ctrl = 0x1U;
|
|
#endif
|
|
mpc83xx.usb_dr.usbmode = USBMODE_CM_HOST;
|
|
#endif
|
|
#ifdef LIBBSP_POWERPC_QORIQ_BSP_H
|
|
qoriq.usb_1.snoop1 = SNOOP_ADDR(0x0) | SNOOP_SIZE_2GB;
|
|
qoriq.usb_1.snoop2 = SNOOP_ADDR(0x80000) | SNOOP_SIZE_2GB;
|
|
qoriq.usb_1.control = CONTROL_USB_EN;
|
|
qoriq.usb_1.portsc1 = htole32(PORTSC_PTS_ULPI | BSP_BIT32(28) | PORTSC_PE);
|
|
qoriq.usb_1.usbmode = USBMODE_CM_HOST;
|
|
#endif
|
|
}
|
|
|
|
static int
|
|
ehci_mpc83xx_attach(device_t self)
|
|
{
|
|
rtems_status_code sc = RTEMS_SUCCESSFUL;
|
|
ehci_softc_t *e = device_get_softc(self);
|
|
usb_error_t ue = USB_ERR_NORMAL_COMPLETION;
|
|
int eno = 0;
|
|
|
|
memset(e, 0, sizeof(*e));
|
|
|
|
/* Initialize some bus fields */
|
|
e->sc_bus.parent = self;
|
|
e->sc_bus.devices = e->sc_devices;
|
|
e->sc_bus.devices_max = EHCI_MAX_DEVICES;
|
|
e->sc_bus.usbrev = USB_REV_2_0;
|
|
|
|
/* Get all DMA memory */
|
|
if (usb_bus_mem_alloc_all(&e->sc_bus, USB_GET_DMA_TAG(self), &ehci_iterate_hw_softc)) {
|
|
return (ENOMEM);
|
|
}
|
|
|
|
/* Child device */
|
|
e->sc_bus.bdev = device_add_child(self, "usbus", -1);
|
|
if (e->sc_bus.bdev == NULL) {
|
|
device_printf(self, "Could not add USB device\n");
|
|
goto error;
|
|
}
|
|
device_set_ivars(e->sc_bus.bdev, &e->sc_bus);
|
|
device_set_desc(e->sc_bus.bdev, "EHCI");
|
|
snprintf(e->sc_vendor, sizeof(e->sc_vendor), "Freescale");
|
|
|
|
/* Register space */
|
|
e->sc_io_tag = 0;
|
|
e->sc_io_hdl = BSP_EHCI_REGISTER_BASE_ADDR;
|
|
e->sc_io_size = 0x88;
|
|
|
|
ehci_mpc83xx_phy_init();
|
|
|
|
ehci_mpc83xx_host_init();
|
|
|
|
/* Install interrupt handler */
|
|
sc = rtems_interrupt_server_handler_install(
|
|
RTEMS_ID_NONE,
|
|
BSP_EHCI_IRQ_VECTOR,
|
|
"USB",
|
|
RTEMS_INTERRUPT_UNIQUE,
|
|
(rtems_interrupt_handler) ehci_interrupt,
|
|
e
|
|
);
|
|
BSD_ASSERT_SC(sc);
|
|
|
|
e->sc_flags |= EHCI_SCFLG_SETMODE | EHCI_SCFLG_NORESTERM | EHCI_SCFLG_TT;
|
|
|
|
/* EHCI intitialization */
|
|
ue = ehci_init(e);
|
|
if (ue != USB_ERR_NORMAL_COMPLETION) {
|
|
goto error;
|
|
}
|
|
|
|
/* Probe and attach child */
|
|
eno = device_probe_and_attach(e->sc_bus.bdev);
|
|
if (eno != 0) {
|
|
goto error;
|
|
}
|
|
|
|
return (0);
|
|
|
|
error:
|
|
ehci_mpc83xx_detach(self);
|
|
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
ehci_mpc83xx_detach(device_t self)
|
|
{
|
|
BSD_PRINTF("TODO\n");
|
|
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t ehci_methods [] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, ehci_mpc83xx_probe),
|
|
DEVMETHOD(device_attach, ehci_mpc83xx_attach),
|
|
DEVMETHOD(device_detach, ehci_mpc83xx_detach),
|
|
DEVMETHOD(device_suspend,bus_generic_suspend),
|
|
DEVMETHOD(device_resume, bus_generic_resume),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
|
|
{0, 0}
|
|
};
|
|
|
|
static driver_t ehci_driver = {
|
|
.name = "ehci",
|
|
.methods = ehci_methods,
|
|
.size = sizeof(struct ehci_softc)
|
|
};
|
|
|
|
static devclass_t ehci_devclass;
|
|
|
|
DRIVER_MODULE(ehci, nexus, ehci_driver, ehci_devclass, 0, 0);
|
|
MODULE_DEPEND(ehci, usb, 1, 1, 1);
|
|
|
|
#endif /* defined(__GEN83xx_BSP_h) || defined(LIBBSP_POWERPC_QORIQ_BSP_H) */
|