rtems-source-builder/source-builder/doc/source-builder.txt

Source Builder
==============
Chris Johns <chrisj@rtems.org>
1.0, November 2012
:doctype: book
:toc:
:icons:
:numbered:

image:images/rtemswhitebg.jpg["RTEMS",width="20%"]

Introduction
------------

The Source Builder is a tool to aid building packages from source. It is not a
package manager. It is just helps consolidate the details that you need to know
to build a package from source. The tool is mainly aimed at those users who
need to maintain tool sets for embedded type development, that is
cross-compiled compiled tool chains, debuggers, and debugging aids. It is not
limited to this role but designed to fit with-in that specific niche.

The Source Builder attempts to support any host environment that runs Python
and you can build the package on. It is not some sort of magic that can take
any piece of source code and make it build. Someone at some point in time has
figured out how to build that package from source and taught this tool.

The Source Builder has two types configuration data. The first is configuration
files and these are scripts based on the RPM spec file format that detail the
steps needed to build a package. The steps are 'preparation', 'building', and
'installing'. The second set of configuration files are 'build sets'. A build
set describes a collection of packages you want built together. For example the
GNU tool set is autoconf, automake, binutils, gcc, and gdb. This is the typical
suite of tools you need for an embedded cross-development type project.

The Source Builder does not interact with any host package management
system. There is no automatic dependence checking between various packages you
build or your host system may have installed. We assume you know what are doing
or the build sets and configuration files you are using have been created by
developers who do. A buld set should provide a known working configuration.

Why build from source ?
~~~~~~~~~~~~~~~~~~~~~~~

If you are developing a system or product that has a long shelf life or is used
in a critical piece of infastructure that has a long life cycle being able to
build from source is important. It insulates the project from the fast ever
changing world of the host development machines. If your tool set is binary and
you have lost the ability to build it you have lost a degree of control and
flexibility open source gives you. Fast moving host environments are
fantastic. We have powerful multi-core computers with huge amounts of memory
and state of the art operating systems to running on them. The product or
project you are part of may need to be maintained well past the life time of
these host. Being able to build from source an important and critical part of
this process because you can move to a newer host and create an equivalent tool
set.

Building from source provides you with control over the configuration of the
package you are building. If all or the most important dependent parts are
built from source you limit the exposure to host variations. For example the
GNU C compiler (gcc) currently uses a number of 3rd party libraries internally
(gmp, mpfr, etc). If your validated compiler generating code for your target
processor is dynamically linked against the host's version of these libraries
any change in the host's configuration may effect you. The changes the host's
package management system makes may be perfectly reasonible in relation to the
distribution being managed how-ever this may not extend to you and your
tools. Building your tools from source and controlling the specific version of
these dependent parts means you are not exposing yourself to unexpected and
often difficult to resolve problems. On the other side you need to make sure
your tools build and work with newer versions of the host operating
sytem. Given the stability of standards based libraries like 'libc' and ever
improving support for standard header file locations this task is becoming
easier.

History
~~~~~~~

The Source Builder is a stand alone tool based on another tool called the
'SpecBuilder'. The SpecBuilder was written for the RTEMS project too give me a
way to build tools on hosts that did not support RPMs. At the time the RTEMS
tools maintainer only used spec files to create various packages. This meant I
had either spec files, RPM files or SRPM files. The RPM and SPRM files where
useless because you needed an 'rpm' type tool to extract and manage them. There
are versions of 'rpm' for a number of non-RPM hosts how-ever these proved to be
in various broken states and randomally maintained. The solution I settled on
was to use spec files so I wrote a Python based tool that parsed the spec file
format and allowed me to create a shell script I could run to build the
package. This approach proved successful and I was able to track the RPM
version of the RTEMS tools on a non-RPM host over a number of years. How-ever
the SpecBuilder tool did not help me build tools or other packages not related
to the RTEMS project where there was no spec file I could use so I needed
another tool. Rather than start again I decided to take the parsing code for
the spec file format and build a new tool called the Source Builder.

Quick Start
-----------

Check out the Source Builder tool from git:

-------------------------------------------------------------
$ git clone git://git.rtems.org/chrisj/rtems-source-builder.git
-------------------------------------------------------------

The first step is to check if your host is set up correctly:

-------------------------------------------------------------
$ rtems-source-builder/source-builder/sb-check
warning: exe: absolute exe found in path: (__objcopy) /usr/local/bin/objcopy <1>
warning: exe: absolute exe found in path: (__objdump) /usr/local/bin/objdump
error: exe: not found: (_xz) /usr/local/bin/xz <2>
Source Builder environent is not correctly set up
$ source-builder/sb-check
Source Builder environent is ok <3>
-------------------------------------------------------------

<1> A tool is in the environment path but does not match the shown path.
<2> The executable 'xz' is not found.
<3> The host's environment is set up correct.

If there are problems you are given a list of executables that cannot be
found. You may also be given a list of warnings about executables not in the
expected location how-ever the executable was located somewhere in your
environment's path. You will need to check the specific host section to resolve
these issues.

Create a suitable build directory away from the Source Builder source change
into that directory and build a GNU tool set:

-------------------------------------------------------------
$ mkdir gnu-tools <1>
$ cd gnu-tools
$ ../rtems-source-builder/source-builder/sb-set-builder <2> --log=l.txt <3> --force <4> \
        --prefix=$HOME/gnu-tools-1 <5> --target=arm-eabi <6> gnu-toolset-4.6 <7>
-------------------------------------------------------------

<1> Make a build directory you can delete when finished.
<2> The Source Builder command to build a set of tools.
<3> Capture the output to a log file.
<4> The force option will create any needed directories and allow the build to
proceed if your host is not set up.
<5> Give the tools a suitable prefix. This is the location you install the
tools into once they have built.
<6> The gnu-toolset requires you set a target. In this case the tool set will
be a generic unpatched version of GCC 4.6 for a bare metal the ARM processor.
<7> The build set.

To view the build sets lets change to the RTEMS project's source builder
configuration and then list the build sets:

-------------------------------------------------------------
$ cd ../rtems-source-builder/rtems
$ ../source-builder/sb-set-builder --list-bsets
Source Builder - Set Builder, v0.1
Examining: /usr/home/chris/development/rtems/src/rtems-source-builder/config <1>
Examining: /usr/home/chris/development/rtems/src/source-builder/config <2>
  gnu-tools-4.6 <3>
  rtems-tools-4.10 <4>
-------------------------------------------------------------

<1> The local RTEMS configuration directory. Searched first.
<2> The Source Builder configuration directory.
<3> The Source Builder provided GNU tools GCC 4.6 build set.
<4> The RTEMS Source Builder provided RTEMS 4.10 build set.

And to view the configurations you can:

-------------------------------------------------------------
$ ../source-builder/sb-set-builder --list-configs
Source Builder - Set Builder, v0.1
Examining: /usr/home/chris/development/rtems/src/rtems-source-builder/config
Examining: /usr/home/chris/development/rtems/src/source-builder/config
  autoconf-2-1 <1>
  autoconf-2.68-1
  autoconf-2.69-1
  autoconf-internal-2.68-1
  automake-1-1
  automake-1.12-1
  automake-internal-1.12-1
  base
  binutils-2-1
  binutils-2.22-1
  checks
  expat-2-1
  expat-2.1.0-1
  gcc-4.4-1
  gcc-4.6-1
  gcc-4.6-newlib-1.20-1
  gdb-7-1
  gdb-7.5-1
  libusb-1-1
  libusb-1.0.9-1
  m4-1-1
  m4-1.4.16-1
  texane-stlink-1
  rtems-binutils-2.20.1-1
  rtems-gcc-4.4.7-newlib-1.18.0-1
  rtems-gdb-7.3.1-1
-------------------------------------------------------------

<1> Configurations are built by using the builder. This creates a stand alone
package.

The Source Builder
------------------

The Source Builder provides a few generic build sets and the configuration
support to build a number of packages. A project that uses the Source Builder
can create a specialised set of configuration files that provides the specific
configurations thet project uses.

For example the RTEMS project provides its own set of configuration files. In
the build set list in the 'Quick Start' section you can see a build set
+rtems-tools-4.10+. This build set defines the extact configration to use for
the RTEMS 4.10 release.