rtems/rtems-libbsd
1
0
Fork 0
mirror of https://git.rtems.org/rtems-libbsd/ synced 2025-05-13 21:50:04 +08:00
Code Issues Packages Projects Releases Wiki Activity

Revert "Return the default TX and RX hardware checksum for the Cadence driver to off."

Browse Source 
This reverts commit 54fb9f01f86286ecea3093f6f524afec86d6313f.

This change adds white space changes. A better solution is to revert
the original change.
This commit is contained in:
Chris Johns 2015-06-22 10:39:41 +10:00
parent 54fb9f01f8
commit 82830ce063
2 changed files with 13 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
freebsd/sys/dev/cadence/if_cgem.c
View File

@ -329,7 +329,7 @@ cgem_rx_filter(struct cgem_softc *sc)
net_cfg = RD4(sc, CGEM_NET_CFG);
net_cfg &= ~(CGEM_NET_CFG_MULTI_HASH_EN |
CGEM_NET_CFG_NO_BCAST |
CGEM_NET_CFG_NO_BCAST |
CGEM_NET_CFG_COPY_ALL);
if ((ifp->if_flags & IFF_PROMISC) != 0)
@ -462,7 +462,7 @@ cgem_setup_descs(struct cgem_softc *sc)
err = bus_dmamap_load(sc->desc_dma_tag, sc->txring_dma_map,
(void *)sc->txring,
CGEM_NUM_TX_DESCS*sizeof(struct cgem_tx_desc),
cgem_getaddr, &sc->txring_physaddr,
cgem_getaddr, &sc->txring_physaddr,
BUS_DMA_NOWAIT);
if (err)
return (err);
@ -514,7 +514,7 @@ cgem_fill_rqueue(struct cgem_softc *sc)
#ifndef __rtems__
/* Load map and plug in physical address. */
if (bus_dmamap_load_mbuf_sg(sc->mbuf_dma_tag,
if (bus_dmamap_load_mbuf_sg(sc->mbuf_dma_tag,
sc->rxring_m_dmamap[sc->rxring_hd_ptr], m,
segs, &nsegs, BUS_DMA_NOWAIT)) {
sc->rxdmamapfails++;
@ -542,7 +542,7 @@ cgem_fill_rqueue(struct cgem_softc *sc)
sc->rxring_hd_ptr = 0;
} else
sc->rxring[sc->rxring_hd_ptr++].addr = segs[0].ds_addr;
sc->rxring_queued++;
}
}
@ -1129,7 +1129,7 @@ cgem_config(struct cgem_softc *sc)
/* Write the rx and tx descriptor ring addresses to the QBAR regs. */
WR4(sc, CGEM_RX_QBAR, (uint32_t) sc->rxring_physaddr);
WR4(sc, CGEM_TX_QBAR, (uint32_t) sc->txring_physaddr);
/* Enable rx and tx. */
sc->net_ctl_shadow |= (CGEM_NET_CTRL_TX_EN | CGEM_NET_CTRL_RX_EN);
WR4(sc, CGEM_NET_CTRL, sc->net_ctl_shadow);
@ -1323,7 +1323,7 @@ cgem_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
~CGEM_NET_CFG_RX_CHKSUM_OFFLD_EN);
}
}
if ((ifp->if_capenable & (IFCAP_RXCSUM | IFCAP_TXCSUM)) ==
if ((ifp->if_capenable & (IFCAP_RXCSUM | IFCAP_TXCSUM)) ==
(IFCAP_RXCSUM | IFCAP_TXCSUM))
ifp->if_capenable |= IFCAP_VLAN_HWCSUM;
else
@ -1423,7 +1423,7 @@ cgem_miibus_writereg(device_t dev, int phy, int reg, int data)
{
struct cgem_softc *sc = device_get_softc(dev);
int tries;
WR4(sc, CGEM_PHY_MAINT,
CGEM_PHY_MAINT_CLAUSE_22 | CGEM_PHY_MAINT_MUST_10 |
CGEM_PHY_MAINT_OP_WRITE |
@ -1778,10 +1778,15 @@ cgem_attach(device_t dev)
ifp->if_init = cgem_init;
ifp->if_capabilities |= IFCAP_HWCSUM | IFCAP_HWCSUM_IPV6 |
IFCAP_VLAN_MTU | IFCAP_VLAN_HWCSUM;
#ifndef __rtems__
/* Disable hardware checksumming by default. */
ifp->if_hwassist = 0;
ifp->if_capenable = ifp->if_capabilities &
~(IFCAP_HWCSUM | IFCAP_HWCSUM_IPV6 | IFCAP_VLAN_HWCSUM);
#else /* __rtems__ */
ifp->if_hwassist = CGEM_CKSUM_ASSIST;
ifp->if_capenable = ifp->if_capabilities;
#endif /* __rtems__ */
ifp->if_snd.ifq_drv_maxlen = CGEM_NUM_TX_DESCS;
IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen);
IFQ_SET_READY(&ifp->if_snd);

14
libbsd.txt
View File

@ -1075,24 +1075,12 @@ Broadcom BCM4401 _bsd_bfe_pcimodule_sys_init Links
Broadcom BCM570x _bsd_bge_pcimodule_sys_init Needs Symbols (A)
E1000 IGB _bsd_igb_pcimodule_sys_init Links
E1000 EM _bsd_em_pcimodule_sys_init Links
Cadence ? Links, works.
----
Symbols (A)
pci_get_vpd_ident
=== Cadence ===
The cadence driver works on the Xilinx Zynq platform. The hardware checksum
support works on real hardware but does not seem to be supported on qemu
therefore the default state is disabled and it can be enabled from the shell
with:
# ifconfig cgem0 rxcsum txcsum
or with an ioctl call to the network interface driver with SIOCSIFCAP and the
mask IFCAP_TXCSUM and IFCAP_RXCSUM set.
== Problems to report to FreeBSD ==
The MMAP_NOT_AVAILABLE define is inverted on its usage. When it is