Switch to PACKAGECONFIG in order to make x264 options configurable.
Enable FFmpeg (by default) and OpenCL (if enabled by the distro). Pick
up the patch to fix building with the latest FFmpeg.
(From OE-Core rev: 4339bf44faa11bf5933f23ac5b0b6ecaa5a1afab)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
brings following fixes
* 450f52eec88f Bump version to 21.1.3.
* 05b5090e961f Port 5b4819e to release/21.x
* 2cb08dbb39b1 [compiler-rt][sanitizer] fix msghdr for musl (#136195)
* 6e687cbe0dd3 [SPARC] Prevent meta instructions from being inserted into delay slots (#161111)
* f8151a1d2c86 [clang] [Headers] Don't use unreserved names in avx10_2bf16intrin.h (#161824)
* 9ee4ac8a8359 [clang][SPARC] Pass 16-aligned structs with the correct alignment in CC (#155829)
* 220bac16a417 [Hexagon] Add opcode V6_vS32Ub_npred_ai for offset validity check (#161618)
* a867bd53e861 [clang][PAC] Don't try to diagnose use of pointer auth on dependent types #159505 (#159859)
* 41e817a1d1f4 release/21.x: [clang-format] Fix bugs in annotating arrows and square brackets (#160973)
* 559d966bcb54 [Mips] Fix atomic min/max generate mips4 instructions when compiling for mips2 (#159717)
* d1e2f8916128 [LLD] [COFF] Fix symbol names for import thunks (#160694)
* 0060034c6a0b [analyzer] Revert #115918, so empty base class optimization works again (#157480)
* 31e4363ba9c2 [NVPTX] Disable relative lookup tables (#159748)
* 74cb34a6f51a Bump version to 21.1.3
(From OE-Core rev: 4a590bdd8794c6873f9ff0dc6d988d62f5b2ca5c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, the definitions of MIRRORS and PREMIRRORS made by
test_yocto_source_mirror() are overwritten when run on the autobuilder:
* MIRRORS = "" is extended by mirrors.bbclass to its usual value.
* PREMIRRORS = "* dl.yp.org" is overwritten by the autobuilder.conf
config fragment to ""
Simplified variable history:
# $MIRRORS [4 operations]
# set .../contribution-yocto/builds/build-qemux86-64-st/conf/selftest.inc:3
# ""
# append .../contribution-yocto/builds/build-qemux86-64-st/../../layers/poky/meta/classes-global/mirrors.bbclass:57
# "${DEBIAN_MIRROR} ..."
MIRRORS=" http://deb.debian.org/debian/pool ..."
# $PREMIRRORS [4 operations]
# set .../contribution-yocto/builds/build-qemux86-64-st/conf/selftest.inc:18
# " bzr://.*/.* http://downloads.yoctoproject.org/mirror/sources/ \n ..."
# set .../contribution-yocto/builds/build-qemux86-64-st/../../layers/poky/meta/conf/fragments/yocto-autobuilder/autobuilder.conf:6
# ""
# append .../contribution-yocto/builds/build-qemux86-64-st/../../layers/poky/meta/classes-global/mirrors.bbclass:84
# "git://sourceware.org/git/glibc.git https://downloads.yoctoproject.org/mirror/sources/ ..."
PREMIRRORS=" git://sourceware.org/git/glibc.git https://downloads.yoctoproject.org/mirror/sources/ ..."
Despite this unexpected configuration, the test passes because after
failing to find a PREMIRROR (empty), failing to download the normal
SRC_URI (because of BB_ALLOWED_NETWORKS), the fetcher tries the MIRRORS
which have by default download.yoctoproject.org. For example, on a
failed meta-oe-mirror test[0], we can see a lot of warnings:
"stdio: WARNING: ... do_fetch: Failed to fetch URL https://... attempting MIRRORS if available"
By using the ":forcevariable" override, test_yocto_source_mirror() makes
sure the correct value is set for MIRRORS and PREMIRRORS (whatever is
the configuration).
Simplified variable history (after the fix):
# $MIRRORS [4 operations]
# append .../contribution-yocto/builds/build-qemux86-64-st/../../layers/poky/meta/classes-global/mirrors.bbclass:57
# "${DEBIAN_MIRROR} ..."
# append .../contribution-yocto/builds/build-qemux86-64-st/../../layers/poky/meta/classes-global/mirrors.bbclass:68
# "git://salsa.debian.org/.* ..."
# override[forcevariable]:set .../contribution-yocto/builds/build-qemux86-64-st/conf/selftest.inc:3
# ""
MIRRORS=""
# $PREMIRRORS [4 operations]
# set .../contribution-yocto/builds/build-qemux86-64-st/../../layers/poky/meta/conf/fragments/yocto-autobuilder/autobuilder.conf:6
# ""
# append .../contribution-yocto/builds/build-qemux86-64-st/../../layers/poky/meta/classes-global/mirrors.bbclass:84
# "git://sourceware.org/git/glibc.git ..."
# override[forcevariable]:set .../contribution-yocto/builds/build-qemux86-64-st/conf/selftest.inc:18
# " bzr://.*/.* http://downloads.yoctoproject.org/mirror/sources/ ..."
# pre-expansion value:
# " bzr://.*/.* http://downloads.yoctoproject.org/mirror/sources/ ..."
PREMIRRORS=" bzr://.*/.* http://downloads.yoctoproject.org/mirror/sources/ ..."
[0]: https://autobuilder.yoctoproject.org/valkyrie/#/builders/82/builds/470/steps/17/logs/warnings
Fixes [YOCTO #15993]
(From OE-Core rev: ab810d1239d4db0bc0f23db31c70cc9c6e59357e)
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sort the lists of VUKAN_DRIVERS, GALLIUMDRIVERS and driver-related
PACAKGECONFIG entries, making it easier to add new drivers or to find
out the correct dependencies for the driver.
(From OE-Core rev: 64108679ada885b74fcc6ac49f9e5e983f34e663)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Historically mesa recipe had separate variables for drivers that
depended on gallium-llvm PACKAGECONFIG. Since that time we started
listing other dependencies explicitly (e.g. libclc). Drop the
intermediate variables and make the dependency on gallium-llvm more
explicit.
(From OE-Core rev: d3ce0b8a9964d2a0afe98701ee4d51b2dbd8d64e)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Asahi drivers depend on the clc to be available, but not on the
RustiCL. Make it possible to build asahi drivers with opencl disabled.
(From OE-Core rev: c869128ba34d1c9c9952206fb6814e6fdbd39bef)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the commits 448f4a84cb22 ("llvm: add recipe for just the LLVM
libraries") and d76dc362c8e1 ("clang: use llvm recipe") the 'llvm'
dependency inside mesa.inc does no longer pull in the clang libraries,
failing RustiCL build as it can not find Clang libaries.
Add direct dependency on the clang in order to fulfill build-time deps.
Fixes: d76dc362c8e1 ("clang: use llvm recipe")
(From OE-Core rev: b8fa4a0ac33638b599ee169db11b5e77b2483148)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building cargo-c with DEBUG mode, QA checks fail due to
absolute paths from the build environment (TMPDIR) being embedded into
the debug symbols/binaries. This causes issues such as:
ERROR: do_package_qa: File /usr/bin/.debug/cargo-capi contains reference to TMPDIR [buildpaths]
ERROR: do_package_qa: File /usr/bin/.debug/cargo-cinstall contains reference to TMPDIR [buildpaths]
ERROR: do_package_qa: File /usr/bin/.debug/cargo-cbuild contains reference to TMPDIR [buildpaths]
ERROR: do_package_qa: File /usr/bin/.debug/cargo-ctest contains reference to TMPDIR [buildpaths]
To fix this, pass an additional -ffile-prefix-map option to DEBUG_PREFIX_MAP to
ensure that paths under `${CARGO_HOME}` are remapped to `${TARGET_DBGSRC_DIR}`.
This ensures debug info is reproducible and does not leak host-specific paths.
(From OE-Core rev: 3239961e35434592c06ec2cae2885ab464d35744)
Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each UBOOT_CONFIG entry is run in a different directory under ${B} so
that the files can be generated, compiled, and installed differently
from each other. Currently that unique directory name was just the
defconfig used for each UBOOT_CONFIG.
One potential conflict arises when you want build the same defconfig
twice, but pass in different make options. Then we get directory
collision. Simple fix is to include both the defconfig name and the
UBOOT_CONFIG type in the directory name.
This change has the potential to be backwards breaking if a layer is
using the UBOOT_CONFIG flow and overriding/appending any of the do_*
shell functions. Each of those will either need to change to using:
${B}/${config} -> ${B}/${config}-${type}
or for append functions they can use the new variable in the parent
function:
${B}/${config} -> ${B}/${builddir}
(From OE-Core rev: 22e96b32b0be02ec0971c9334d4b1df7c9ef8d84)
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In gawk-5.2, a feature that allows gawk to preserve memory between runs:
https://www.gnu.org/software/gawk/manual/html_node/Persistent-Memory.html
was added. The files that implement this, support/pma.[ch], are licensed
under the AGPL3 which some entities perfer to avoid. Force people to knowingly
opt into using this feature and license using:
PACKAGECONFIG:append:pn-gawk = " pma-if-64bit"
where pma is an abbreviation for persistent memory allocator and the
"-if-64bit" suffix is a indicator to users that the feature only works
for 64 bit targets. Also add AGPL to LICENSE and LICENSE:${PN}, when using pma.
Correct the license to be AGPL-3.0-or-later. There hasn't been a change in
the license terms, at least for main.c, haven't changed significantly in
the last 15 years:
License-Update: Reflects conditional AGPL use and more as described above.
Testing requires a non-root account and following the example in the link above:
$ truncate -s <size> data.pma
$ chmod 0600 data.pma
$ GAWK_PERSIST_FILE=data.pma gawk 'BEGIN { print ++i }'
1
$ GAWK_PERSIST_FILE=data.pma gawk 'BEGIN { print ++i }'
2
$ GAWK_PERSIST_FILE=data.pma gawk 'BEGIN { print ++i }'
3
This works on qemu[x86-|arm|riscv]64 but not on qemu[arm|x86] where the
--enable-pma is ignored because there is a requirement and build-time test
for 8 byte void pointers in m4/pma.m4:
if test "$SKIP_PERSIST_MALLOC" = no && test $ac_cv_sizeof_void_p -eq 8
Finally, remove an old comment about GPLv2, GPLv3 versions of gawk
since this is no longer important as the GPLv2 version is not maintained.
(From OE-Core rev: d7b6887dfbe2817ceb03d44a59210f65bbb25390)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade to latest 1.25.x release [1]:
$ git --no-pager log --oneline go1.25.1..go1.25.2
bed6c81c2d (tag: go1.25.2) [release-branch.go1.25] go1.25.2
2612dcfd3c [release-branch.go1.25] archive/tar: set a limit on the size of GNU sparse file 1.0 regions
90f72bd500 [release-branch.go1.25] encoding/pem: make Decode complexity linear
e0f655bf3f [release-branch.go1.25] encoding/asn1: prevent memory exhaustion when parsing using internal/saferio
100c5a6680 [release-branch.go1.25] net/http: add httpcookiemaxnum GODEBUG option to limit number of cookies parsed
f0c69db15a [release-branch.go1.25] crypto/x509: improve domain name verification
9fd3ac8a10 [release-branch.go1.25] net/url: enforce stricter parsing of bracketed IPv6 hostnames
5d7a787aa2 [release-branch.go1.25] net/textproto: avoid quadratic complexity in Reader.ReadResponse
930ce220d0 [release-branch.go1.25] crypto/x509: mitigate DoS vector when intermediate certificate contains DSA public key
6a057327cf [release-branch.go1.25] net/mail: avoid quadratic behavior in mail address parsing
66f6feaa53 [release-branch.go1.25] spec: revert "update spec date to match release date"
d6f2741248 [release-branch.go1.25] spec: update spec date to match release date
28ac8d2104 [release-branch.go1.25] net/http: avoid connCount underflow race
06993c7721 [release-branch.go1.25] context: don't return a non-nil from Err before Done is closed
0b53e410f8 [release-branch.go1.25] debug/pe: permit symbols with no name
7735dc90ed [release-branch.go1.25] cmd/compile: don't rely on loop info when there are irreducible loops
205d086595 [release-branch.go1.25] crypto/tls: quote protocols in ALPN error message
16fdaac4b1 [release-branch.go1.25] sync/atomic: correct Uintptr.Or return doc
f3dc4aac0b [release-branch.go1.25] runtime: initialise debug settings much earlier in startup process
79c3081b4b [release-branch.go1.25] internal/poll: don't call Seek for overlapped Windows handles
b816c79658 [release-branch.go1.25] lib/fips140: re-seal v1.0.0
90de3b3399 [release-branch.go1.25] crypto/internal/fips140: remove key import PCTs, make keygen PCTs fatal
bec452a3a2 [release-branch.go1.25] crypto/internal/fips140: update frozen module version to "v1.0.0"
57bd28ab7f [release-branch.go1.25] crypto/internal/fips140/ecdsa: make TestingOnlyNewDRBG generic
f75bcffa4a [release-branch.go1.25] os: set full name for Roots created with Root.OpenRoot
7d570090a9 [release-branch.go1.25] os: fix Root.MkdirAll to handle race of directory creation
be61132165 [release-branch.go1.25] cmd/compile: export to DWARF types only referenced through interfaces
a86792b169 [release-branch.go1.25] net: skip TestIPv4WriteMsgUDPAddrPort on plan9
879e3cb5f7 [release-branch.go1.25] runtime: lock mheap_.speciallock when allocating synctest specials
Fixes CVE-2025-61725, CVE-2025-58187, CVE-2025-58189, CVE-2025-61723,
CVE-2025-47912, CVE-2025-58185, CVE-2025-58186, CVE-2025-58188,
CVE-2025-58183 and CVE-2025-61724 [2].
[1] https://github.com/golang/go/compare/go1.25.1...go1.25.2
[2] https://groups.google.com/g/golang-announce/c/4Emdl2iQ_bI
(From OE-Core rev: b46e8fdfc23a575ee8c69c136c7815e366a7e904)
Signed-off-by: Peter Marko <peter.marko@siemens.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The include options shouldn't be needed with the make fix but issues still remained.
Looking at the logs, it looks like these are from other header directories and
we need to run "make install_headers" for all of the sub components before starting
the main build.
Update the workaround to do that for each component with internal header copies.
(From OE-Core rev: 0b5f0a7b1db9f6923c027719181fa60f8fdb73e4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that all of the current firmware has either been moved into
sub-packages or removed due to licensing the base package is now
empty. Going forward we would like to keep the base package empty
and force the version updates to bin any new firmwares into
sub-packages.
(From OE-Core rev: 9b883aa6f3cf881bfd60442b9ec193ae191b4cbe)
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a new REMOVE_UNLICENSED variable and do_install() logic to
allow for marking certain firmware files as something to remove and not
package up.
This comes from the fact that the WHENCE file has a number of firmware
entries that have no license information or very questionable
declarations as to what the license is for the firmware.
(From OE-Core rev: 406628a31b7d903e6545d8a1b6d0548f0874ed6d)
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A lot of the firmware has already been broken out into sub-packages, but
a good number were still lingering in the base linux-firmware package.
Move all of the remaining firmware into sub-packages based on the
driver name in the WHENCE file or into existing sub-packages where a
file or two were missed.
(From OE-Core rev: c53c6a0a11afb5c6133e1751e0b35e7eb809b60b)
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor grammatical changes, and removal of some duplicate
information. Also note which features were previously part of the
debug-tweaks feature.
(From OE-Core rev: 377e6e7bc4be086c217f92db11f5c6101b52d88c)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a zsh-completion-pkgs image feature to install *-zsh-completion
packages into an image. This is similar to the existing
bash-completion-pkgs feature.
Suggested-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
(From OE-Core rev: c2d4228197ed0d0d00bb464237fa151a928eba76)
Signed-off-by: Adam Nilsson <Adam.X.Nilsson@axis.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Specifically:
- when using integrated poky, autobuilder clones it into 'build', rather than 'poky'
- do not use a catch-all default to tweak the commit id openembedded-core, rather make it specific to that
repository.
(From OE-Core rev: 9a77dea19b0a9b07a21648e6f231d936d7387846)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With config fragments, changing MACHINE in the test like this no
longer works. Use the forcevarable override to allow it to work.
This also needs a tweak to bitbake to work correctly, sent
seperately. Whilst ugly, this avoids the need to start changing
config fragments.
(From meta-yocto rev: 3f56d9e3b1b30116d979a98f7cf765c26996016a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Imagine a machine fragment machine/A and a configuration which sets:
MACHINE = "B"
MACHINE:forcevariable = "C"
As I understand it, the fragment behaviour was intended to replace the
MACHINE = "B", so the override would still be active. The current code
replaces all variable overrides.
parsing=True, switches to the other behaviour, which I believe was the
design intent and the behaviour users would expect.
This is useful to allow test configurations to override a MACHINE setting
without change the fragments which would complicate the test code.
(Bitbake rev: f65bc6aaf4c11bc7e566c895209c093627a3015b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ftp.gnu.org is the main server of the GNU project, however download speed
can vary greatly based on one's location.
Using ftpmirror.gnu.org should redirect the request to the closest up-to-date mirror,
which should result sometimes in significantly faster download speed, depending
on one's location. This should also distribute the traffic more across the mirrors.
This information was sourced from https://www.gnu.org/prep/ftp.html
(From OE-Core rev: f3046716c9c565e6f65d5169694cd3da126cfaeb)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ftp.gnu.org is the main server of the GNU project, however download speed
can vary greatly based on one's location.
Using ftpmirror.gnu.org should redirect the request to the closest up-to-date mirror,
which should result sometimes in significantly faster download speed, depending
on one's location. This should also distribute the traffic more across the mirrors.
This information was sourced from https://www.gnu.org/prep/ftp.html
(From OE-Core rev: b8cd34e56819e13fd374210cf67d6952d1f2586d)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a need to generate alternative versions of the uboot files
using the existing config looping system, but we need to add additional
settings to the make call rather simply specifying a different config.
Specifically we have two use cases:
1) We want to sign the same uboot files with two different keys where
the key will be passed on the make call.
2) We want to include the alternative defconfigs from a different
repository and need to add the path to this new location on the make
command line.
This introduces a fourth value for the UBOOT_CONFIG settings:
config,images,binary,make_opts
The values are placed into a new generated variable
UBOOT_CONFIG_MAKE_OPTS which is a '?' separated list since space can be
present if you need to specify multiple options. This is handled by
changing IFS in the shell code when looping over the variable.
Additionally, add in a new variable UBOOT_MAKE_OPTS which is added to
the make calls in the various do_compile functions that do the actual
compiling.
(From OE-Core rev: 3338330e0c46b83e33c7e982c012459c89a7ec5c)
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the SSH test, it makes sense to ignore SSH failures in the SSH
helper and manage them in the test body.
(From OE-Core rev: 2281fd4c10e38a3cad3050b7a21a72cc7b09e718)
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Postactions are not part of the tests but allow to retrieve useful data
from the target. They try to do this using SSH, but this can fail when
no SSH server is present on the target. Ignore these fails.
(From OE-Core rev: b7b3db490f9cdf99e71f114aec9fc8ad5c1d1d56)
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tests using SSH will fail when no SSH server is present on the target.
These tests are disabled in these cases, by being marked with a
dependency on ssh.SSHTest.test_ssh, which in turns has a dependency on
having either dropbear or openssh-sshd in the image.
But setUpClass() and tearDownClass() functions are always executed, even
on tests failing the dependency checks, leading to unexpected failed
tests.
Ignoring SSH errors in setup and tear down allows to avoid these test
errors.
(From OE-Core rev: 5bcc914cf5a193137cddc004f3b38b7b04af9ecb)
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most tests running SSH commands ask for no error to be raised when the
returned status is not 0. As run() will return this status, they may
later use its value to do a similar check on their own, or completely
ignore it. But most of the tests do not check if the non-zero status is
caused by a fail of the command run on the target or by a fail of SSH
itself.
This can lead to confusion when the error does not come from the command
executed on the target but from SSH itself: test might wrongfully be
marked as PASSED or might fail with incoherent errors.
As SSH errors are always reported with exit code 255, we can easily
filter these.
Modify OESSHTarget.run() behaviour so an AssertionError is raised on SSH
failures, even when ignore_status parameter is True. Still allow to
explicitly ignore this error for the rare cases where this can be
needed.
(From OE-Core rev: afe118d4f2de1f636b3a81dc692da35b35a3f2d7)
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ChangeLog:
2024-12-16 (bug) [63449c] [namespace children] doesn't match non-glob
patterns below the global namespace
2025-01-06 (bug) [fc3509] Better error-message than "interpreter uses
an incompatible stubs mechanism"
2025-01-19 tzdata updated to Olson's tzdata2025a
2025-01-28 (bug) [4f0b57] Win: [exec] now works on App Execution
Aliases.
2025-01-28 (bug) [4e2c8b] Win: [auto_execok] handles larger set of
shell commands.
2025-03-06 (bug) [ba68d1] errorline from [interp eval], interp-26.9
2025-03-23 tzdata updated to Olson's tzdata2025b
2025-04-11 (bug) [fd8341] Tcl_InitStubs compatibility for 9.1, better
error-handling
2025-05-05 (bug) [42d14c] Fix scan with long mantissa. Ex.: scan
"1.[string repeat 1 191]e-321" %g
2025-06-18 (bug) [4f338b] add missing Tcl_CloseEx docs
2025-06-24 (bug) [ecf35c] Correct nested handling of return option
-options
2025-06-25 (bug) [ecafd8] Euro/Tail-sign missing from cp864 encoding
2025-07-03 (bug) [6b0f77] gcc 14 breaks configure test for bigendian
leading to broken floating point
2025-07-16 (bug) [c9f052] prevent overflow crash in Tcl_SplitList().
2025-07-21 (bug) [61c01e] Flawed ref counts in filesystem
implementation for Windows led to use-after-free
2025-08-12 (new) dde => 1.4.5
2025-08-12 (bug) [992f94] avoid misaligned pointers in macOS file
attribute functions
Set LC_ALL and LANG to en_US.UTF-8 when running ptest since the test
cases now include more encodings than just ASCII[1].
Also, add rdepends on locale-base-en-us and tzdata for ptest package,
as they are required for running ptest.
[1] aca3422d8b
(From OE-Core rev: 77cfa81c065cbdd31db1245379d7b9ec1dc224ae)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This option is added by ghostscript and is passed down to its modules
e.g. brotli, brotli does expect c99 or newer standard and hence uses
declarations after statement. This option causes compiler e.g. clang
to find this warning and treat it as error on 32bit builds
./brotli/c/dec/decode.c:440:12: error: mixing declarations and code is incompatible with standards before C99 [-Werror,-Wdeclaration-after-statement]
440 | uint32_t __fastload_table = (*table);
| ^
1 error generated.
(From OE-Core rev: 9b8e0b9a30f1de8bd1816f2528bc696f769dd8dc)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While all but the osc fetcher ignore the third parameter of their
latest_revision implementation, 'default' isn't a valid name in general.
Since commit 2515fbd10824 ("fetch: Drop multiple branch/revision support
for single git urls") in bitbake a fetcher only handles a single
branch/revision and the only sensible thing to pass is `ud.name`.
(From OE-Core rev: cb36e8a62d7d31b75b3ddc6b84c1bdee09ebbc60)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Release information:
https://github.com/openssl/openssl/blob/openssl-3.5/NEWS.md#major-changes-between-openssl-353-and-openssl-354-30-sep-2025
OpenSSL 3.5.4 is a security patch release. The most severe CVE fixed in this release is Moderate.
This release incorporates the following bug fixes and mitigations:
* Fix Out-of-bounds read & write in RFC 3211 KEK Unwrap. (CVE-2025-9230)
* Fix Timing side-channel in SM2 algorithm on 64 bit ARM. (CVE-2025-9231)
* Fix Out-of-bounds read in HTTP client no_proxy handling. (CVE-2025-9232)
* Reverted the synthesised OPENSSL_VERSION_NUMBER change for the release builds, as it broke some exiting applications that relied on the previous 3.x semantics, as documented in OpenSSL_version(3).
Release information:
https://github.com/openssl/openssl/blob/openssl-3.5/NEWS.md#major-changes-between-openssl-352-and-openssl-353-16-sep-2025
OpenSSL 3.5.3 is a bug fix release.
This release incorporates the following bug fixes and mitigations:
* Added FIPS 140-3 PCT on DH key generation.
* Fixed the synthesised OPENSSL_VERSION_NUMBER.
* Removed PCT on key import in the FIPS provider as it is not required by the standard.
(From OE-Core rev: 0e2b3c46fdf2e2b3854fa73bda434fdd41da0a3c)
Signed-off-by: Peter Marko <peter.marko@siemens.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This too used to work by coincidence: sourcing the environment
quietly failed without changing to the build directory, but
now that it works properly, things should be done in correct order.
(From OE-Core rev: ed98173057fa128ff565e1e1078b150ca14a85e0)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sourcing a script with arguments is a non-standard bash extension
and doesn't work with other shells (e.g. dash, which is used on
Debian and derivatives). This used to work by coincidence when
running against integrated poky repo without having to separately
specify where bitbake is, but no longer does.
Using set is a POSIX standard.
(From OE-Core rev: 933686b7c6307778d171967c49b3a7b6645c31c0)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pass the BITBAKEDIR parameter to oe-init-build-env when called from the
environment-setup script. This fixes compatibility with bitbake-setup,
which places bitbake in a different directory structure than the
standard poky repository layout where bitbake is located alongside
oe-init-build-env.
The issue was discovered when running the oe-selftest test
DevtoolIdeSdkTests.test_devtool_ide_sdk_shared_sysroots, which failed
because the environment-setup script was not able to find bitbake.
File ".../openembedded-core/meta/lib/oeqa/selftest/cases/devtool.py",
line 2955, in test_devtool_ide_sdk_shared_sysroots
self.assertExists(cmake_native)
~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^
File ".../openembedded-core/meta/lib/oeqa/selftest/case.py", line 251,
in assertExists
raise self.failureException(msg)
AssertionError: 'Error: The bitbake directory (/tmp/devtoolqah9ndff2x/bitbake)
does not exist! Please ensure a copy of bitbake exists at this location or
specify an alternative path on the command line\n
.../build-st/tmp/sysroots/x86_64/usr/bin/cmake' does not exist
(From OE-Core rev: f31903ca484bad68708ec510e25ea33234f5c0ce)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
